JVC LT-55MA875 User manual

4K UHD HDR Smart TV
Before operating the unit, please read this manual thoroughly.
ATTENTION
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO CALLING
FOR RECYCLING INFORMATION, PLEASE CONTACT CUSTOMER SERVICE.
CUSTOMER SERVICE - 1-888-582-8870
ENGLISH
USER GUIDE
LT-55MA875
(55" class/ 54.64 diagonal)"

Contents
Safety and warnings................................................................................................ 2-3
Warnings and Cautions............................................................................................ 4
Introduction............................................................................................................ 5-6
Installation..............................................................................................................7-10
..............................................................................................................11
Remote Control.......................................................................................................12
Operation................................................................................................................13-25
Trouble Shooting..................................................................................................... 26-27
Wall Mount

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK
DO NOT OPEN!
CAUTION
CAUTION
The symbol indicates that dangerous
voltages constituting a risk of electric
shock are present within this unit.
The symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying
this unit.
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
WARNING:
The batteries shall not be exposed to
excessive heat such as sunshine, fire or
the like.
WARNING:
WARNING
Never place a television set in an unstable
location. A television set may fall, causing serious
personal injury or death. Many injuries,
particularly to children, can be avoided by taking
simple
precautions such as:
– Using cabinets or stands recommended by the
manufacturer of the television set.
– Only using furniture that can safely support the
television set.
– Ensuring the television set is not overhanging
the edge of the supporting furniture.
– Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television set
to a suitable support.
– Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
– Educating children about the dangers of
climbing on furniture to reach the television set or
its controls.
If your existing television set is being retained and
relocated, the same considerations as above
should be applied.
SAFETY AND WARNINGS
-2-
IMPORTANT SAFETY INSTRUCTIONS
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with non abrasive dry cloth.
7) Do not block any ventilation openings, install in
accordance with the instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11) Only use attachments/accessories specified
by the manufacturer.
12) Unplug this apparatus during lighting storms
or when unused for long periods of time.
13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such as
when power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or
has been dropped.
14) Mains plug is used as the disconnect device,
the disconnect device shall remain readily
operable.
15) Do not cover the ventilation openings with
items such as newspapers, table-cloth, curtains,
etc.
16) No naked flame sources, such as lighted
candles, should be placed on the apparatus.
17) Attention should be drawn to the
environmental aspects of battery disposal.
18) Use apparatus in moderate climate.
19) The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
20) Use only with a cart , stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.

This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user
accessible parts. When servicing use only
identical replacement parts.
This marking indicates that this product
should not be disposed with other
household wastes throughout the EU. To
prevent possible harm to the environment
or human health from uncontrolled waste
disposal, recycle it responsibly to promote
the sustainable reuse of material
resources. To return your used device,
please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environmental safe recycling.
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user’s authority to operate
the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and(2) this device must accept any interference
received, including interference that may cause
undesired operation.
SAFETY AND WARNINGS
-3-

Warning
High voltages are used in the operation
of this television receiver. Do not remove
the cabinet back from your set. Refer
servicing to qualified service personnel.
Warning
To prevent fire or electrical shock
hazard, do not expose the television
receiver to rain or moisture.
Warning
Do not drop or push objects into the
television cabinet slots or openings.
Never spill any kind of liquid on the
television receiver.
Caution
Do not block the ventilation holes in the
back cover. Adequate ventilation is
essential to prevent failure of electrical
components.
Caution
Do not trap the power supply cord under
the television receiver.
Caution
Never stand on, lean on, or suddenly push
the television or its stand. You should pay
special attention to children. Serious injury
may result if it should fall.
Caution
Do not place your television on an unstable
cart, stand, shelf or table. Serious injury to
an individual , and damage to the
television, may result if it should fall.
Caution
When the television receiver is not
used for an extended period of time, it
is advisable to disconnect the AC power
cord from the AC outlet.
Dim:51 5*320mm(不 包括底座 ）
WARNINGS AND CAUTIONS
-4-

®
HDMI CEC Control
Enjoy the benefit of having HDMI CEC-compatible
products plug and play! No setup is needed! CEC
technology lets different devices discover and
communicate with each other.
®
DTS Studio Sound
DTS Studio Sound is an advanced surround sound
solution suite that accurately extracts and places
audio cues for an immersive surround experience
over the TV’s built-in speakers. To complete the audio
experience, post processing and psychoacoustic
techniques are implemented to provide 3D audio
rendering to match 3D video content, for bass and
dialog enhancement and to deliver consistent and
level volume across content.
4K ULTRA HD CONNETED
Four times the pixel resolution of the 1080full HD.
4K Ultra HD TVs with at least 8 million active pixels.
Our televisions that resolution has standardized to
3,840 by 2,160.
HDR
Expanding the TV's contrast ratio and color palette
to offer a more realistic, natural image than what's
possible with today's HDTVs. Support HDR video,
HDR Creates a wider gamut of colors, allowing for a
more vivid display. HDR for TVs aims to show you a
more realistic image, one with more contrast,
brightness and color than before.
Audio accessibility
Your TV provides audio descriptions of menus and
some remote control functions. Depending on the
broadcaster, audio narration of key elements in
programs may also be available.
Congratulations on your purchase of a high-quality
JVC product. Your represents the state of the art in
LED TV design and is designed for reliable and
trouble-free performance.
TM
Google Chromecast built-in
UNLIMITED ENTERTAINMENT, ALL ON YOUR
SCHEDULE
• With Google Chromecast™ built-in, you are in
command. Access more than 200,000 TV shows
and movies, millions of songs and more through
apps like Netflix, YouTube, and Google Play.
Discover new content, with more apps being
added all the time at g.co/castapps.
USE YOUR PHONE AS A REMOTE
• By using your phone, there's nothing new to
learn—cast your apps, your playlists, your TV
shows—without new log-ins or downloads. It's
simple to search, browse, queue, and control from
anywhere in the home.
MULTI-TASK WITHOUT INTERRUPTING WHAT’S
PLAYING
• While you are casting, you can keep using your
phone for other things without disrupting what is
playing on the TV.
Introduction
INTRODUCTION
-5-

INTRODUCTION
!Thank you very much for purchasing this TV. To enjoy
your product from the very
beginning, read this manual carefully and keep it handy for
easy reference.
INSTALLATION
CAUTION
*Locate the TV in the room where light does not strike the
screen directly.
*Total darkness or a reflection on the picture screen can
cause eyestrain. Soft and indirect lighting is recommended
for comfortable viewing.
*Allow enough space between the TV and the wall to permit
ventilation.
*Avoid excessively warm locations to prevent possible
damage to the cabinet or premature component failure.
*Do not cover the ventilation openings when using theTV.
Never tamper with any components inside the TV, or any
other adjustment controls not mentioned in this manual.
All LED-TVs are high voltage instruments. When you
clean up dust or water drops on the LED PANEL or
CABINET, the power cord should be pulled out from the
receptacle, then wipe the TV with a dry soft cloth.
During thunder and lighting, unplug the power cord and
antenna cord to prevent damage to your TV. All repairs
to this TV should only be performed by qualified TV
service personnel.
Main Specifications
Main features
■ Integrated ATSC TV tuner for HDTV broadcast reception
■ High brightness provides a vivid and brilliant picture
■ Deeper blacks and brighter whites with high contrast
■ Wide Screen aspect ratio (16:9) for a complete home
theater experience
■ HDMI input for true digital connection
■ Built-in stereo speaker system
■ Full-function Remote Control
Accessories
x 3
Resolution:
TV System:
Video Signal System:
Receiving Channel:
16:9
NTSC
Cable :1-135/ Air: 2-69 (ATV&DTV)
High-Definition Multimedia Interface (HDMI) Input
USB Input
x 1
x 1
Horizontal definition (TV line) Composite Video Input >=350
Video Input >=400
x 1
AC 100-240V 50/60Hz
2x10W
ATSC Digital system and NTSC Analog system
Headphone Output
x 1
x 1
Optical Output
Aspect Ratio:
Viewing Picture Size (diagonal)
Power supply
Audio Output Power (THD 1%):
Composite Video Input
Power consumption
55"
150W
3840 x 2160
LAN
-6-
Infrared Remote Control................... 1
Battery(AAA)........................ .. 2.........
Screws........................................... 4
Base stand...................................... 2
Quick Start Guide............................ 1
Warranty Card............................ 1.....

REAR Connections
SIDE Connections
KEYBOARD
The keyboard is located at the bottom left near the right
side of signal indicator.
Remote Buttons
“ ” move left
“ ” move right
“ ” move down
“ ” move up
“ Center button ” power key and source key, hold it for a
long time, the TV will power down.
All the terminals are (from left to right):
LAN, VIDEO ,RF.
LAN VIDEO L R RF
All the terminals are (from left to right):
HEADPHONE, OPTICAL, HDMI3, HDMI2, HDMI1(ARC), USB.
HEADPHONE OPTICAL HDMI3 HDMI2 HDMI1(ARC) USB
Front panel
INSTALLATION
-7-
Bottom
1: Remote control sensor.
2: Indicator LED: RED STANDBY.
3: Key board
3
2
1

ANTENNA
Note:
Aerial connections: (female).
Input impendance: 75 unbalanced.
F
PRESET MODE (HDMI)
1
2
3
800*600
1024*768
60
60
37.88
48.36
RESOLUTION V.Freq.(Hz) H.Freq.(KHz)
1360*768 60 47.7
4
1280*768 60 47.3
5
1920*1080 60 67.5
6
30 67.5
7
60 135
3840*2160
3840*2160
INSTALLATION
-8-

Prepare to place the TV with the display side down on a flat surface. Due to the size and weight of this
TV, the use of 2 people is recommended when moving it. Ensure the table or desk you use provides a
flat, totally clean surface, and use a soft cloth between the face of the TV and the table to protect the
TV's screen.
1. Locate the 2PCS of the base stand and insert it into the gap in the bottom of the TV , and check that
it is securely held in place as per a) below.
2.Lock 4 screws in the designated location as per b) below and check each screw is firmly tightened.
The base stand
b)
a)
INSTALLATION
Base Stand Assembly Instruction
-9-
4 x Screws( )M4X14MM

AV EQUIPMENT
Red (audio R)
White(audio L)
Red(Pr or Cr)
R
W
R
Blue(Pb or Cb)
Green(Y)
B
G
Yellow (video)
Y
AMPLIFIER
HEADPHONE OPTICAL HDMI3 HDMI2 HDMI1(ARC) USB
LAN VI DEO L R RF
INSTALLATION
You can use the rear input terminals as follows.
-10-
The television's inputs can be connected to the following types of equipment: VCR, multi disc player,
DVD, camcorder, video game or stereo system, etc.....
YPbPr can support these video formats:480i,576i,480p,576p,720p,1080i, 1080p.

Dimensions for Mounting Hole Pattern
A wall mount kit (purchased separately) would allow you to mount your JVC
TV on the wall. For detailed information on installing the wall mount, refer
to the instructions provided by the wall mount manufacturer. It is strongly
recommended to contact a technician for professional assistance for wall mount
installation. is not responsible for any damagJVC e to the product or injury to
yourself or others resulting from the wall-mounting.
This TV is compatible with a 400mm x 200mm mounting hole pattern.JVC
- Do not mount your TV at more than a 15 degree tilt.JVC
- Always use two people to mount the TV to a wall.
- Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
- 4 pcs of type M6 screws are required for installing the wall mount bracket to
your TV. Do not use screws that are longer than 10 mm. Screws that JVC
are too long may cause damag e to the inside of the TV set.
- Do not fasten the screws too tight for this may damage the TV or cause the
TV to fall, resulting in personal injury. is not liable for these kinds of JVC
incidents.
Instruction for Wall Mount
-11-
WALL MOUNT
400
200
62

REMOTE CONTROL
Button Press to...
1. (power) : Turn your TV on or off (standby mode).
When your TV is off the power indicator lights red.
Warning: When your TV is off, power still flows
through it. To disconnect power, unplug the power
cord.
2. : Switch to Chromecast built-in.
3.VOL +/- : To adjust sound level.
4. OK: Confirm selections or changes in TV menus.
5. (play/pause): Start or stop playback.
6. (back): Return to the previous level or channel.
7. (INPUT): Open the Input Selection list. Press
INPUT one or more times or press S or T to select the
video input source, then press OK. See Selecting the
video input source .
8. (MUTE): To disable or enable the sound output
9. CH +/- : Change channel in channel list.
10. MENU: Open the on-screen menu..
REMOTE CONTROL
-12-

Turning on your TV for the first time
The first time you turn on your TV, the initial setup
wizard opens. The wizard guides you through setting
up your TV
including the Chromecast built-in setup, menu
language, time zone, TV signal source, and the
channel list.
If you are using an Android mobile device, go to
Using an Android mobile device.
If you are using an iOS (Apple) mobile device, go to
Using an iOS (Apple) mobile device.
Using an Android mobile device
1 Make sure that you:
-Turn off the smart network switch option (if your
device has this option). On your phone, go to the Wi-
Fi menu in the settings app.
- Connect the correct device to watch standard
broadcast TV channels using a cable box, satellite
box, or external antenna.
-Know the Wifi network name and password if you
are using a wireless network to set up your TV.
Note
1.If you want to use a wired connection instead of Wifi
to set up your TV, connect your TV to an Internet
router using the LAN jack.
With a wired connection, you cannot connect to
Chromecast built-in with an LTE or 3G network.
2. Press (power) to turn on your TV. The Set me up
screen opens.
3. Type google.com/cast/setup in the search bar of
your device's browser.
4. Tap GET IT ON Google Play.
5.Tap INSTALL. The app installs.
6.Tap OPEN.
7. Tap ACCEPT to agree to the Terms of Service and
Privacy Policy.
Note
If you have not turned on Wi-Fi on your device, a
message tells you to turn on Wi-Fi.
8. Tap TURN ON LOCATION.
9. Tap ALLOW. Your mobile device searches for Cast
TVs in range.
10. Tap CONTINUE after your device finds your Cast
TV.
11. Make sure that the codes on your device and TV
match, then on your mobile device, tap I SEE THE
CODE.
OPERATION
-13-

12. Optional: To change the name of your TV to
something distinct, delete the current name, type in a
new one, then tap CONTINUE.
13. Choose your Wifi network, enter the Wifi
password (if necessary), then tap CONTINUE. Your
TV connects to the network and is ready to cast.
Note
If your TV receives an update, wait for the update to
finish.
14. Sign in to your Google account to personalize
your casting experienceORTap LEAVE SETUP to
start casting right away.
15. Tap the slider to turn email notifications on or off,
then tap CONTINUE.
16. Tap LEARN HOW TO CAST to go through a
tutorial.ORTap SKIP to skip the tutorial.
17. Tap (Manage your devices) to set up, manage,
and control the devices on your network.
After setting up Chromecast built-in, your TV's
menu language, time zone, and daylight savings
time settings should be set automatically to match
the settings on your mobile device.
If the settings are not correct or you want to change
the settings, see:
Setting the time zone and Daylight Saving Time
status.
Selecting the menu language .
If you connected cable TV without a box or an
external antenna to the ANT / CABLE IN jack, set
up the ANT / CABLE IN jack and scan for channels.
See:
Setting up the ANT / CABLE IN jack
Automatically scanning for channels .
OPERATION
-14-

Using an iOS (Apple) mobile device
1 Make sure that you:
Turn off the smart network switch option (called Wi-Fi
Assist) under Settings > Cellular.
Install the remote control batteries and connect the
power cord.
Connect the correct device to watch standard
broadcast TV channels using a cable box, satellite
box, or external antenna.
Know the Wifi network name and password if you are
using a wireless network to set up your TV.
Connect the correct device to watch standard
broadcast TV channels using a cable box, satellite
box, or external antenna.
Know the Wi-Fi network name and password if you
are using a wireless network to set up your TV.
Note
1.If you want to use a wired connection instead of Wifi
to set up your TV, connect your TV to an Internet
router using the LAN jack. For more information, see
Connecting a network router .
With a wired connection, you cannot connect to
Chromecast built-in with an LTE or 3G network.
2. Turn on Wifi on your mobile device and connect it
to your home Wifi network.
3. Turn on Bluetooth on your mobile device.
4. Press (power) to turn on your TV. The Set me up
screen opens.
5. Type google.com/cast/setup in the search bar of
your device's browser.
6. Tap Download on the App Store.
7. Tap GET.
8. Tap OPEN.
9. Tap ACCEPT to agree to the Terms of Service and
Privacy Policy. Your mobile device searches for Cast
TVs in range.
Note
If you have not turned on Wi-Fi on your device, a
message tells you to turn on Wi-Fi.
10. Tap CONTINUE after your device finds your Cast
TV.
OPERATION
-15-

11. Make sure that the codes on your device and TV
match, then on your mobile device, tap I SEE THE
CODE.
12. Select your region, then tap CONTINUE.
13. Optional: To change the name of your TV to
something distinct, delete the current name, type in a
new one, then tap CONTINUE.
14. Choose your Wifi network, enter the Wifi
password (if necessary), then tap CONTINUE. Your
TV connects to the network and is ready to cast.
Note
If your TV receives an update, wait for the update to
finish.
OPERATION
-16-

15. Sign in to your Google account to personalize
your casting experience.
OR Tap LEAVE SETUP to start casting right away.
16. Tap the slider to turn email notifications on or off,
then tap CONTINUE.
17. Tap LEARN HOW TO CAST to go through a
tutorial. OR Tap SKIP to skip the tutorial.
18. Tap (Manage your devices) to set up, manage,
and control the devices on your network.
After setting up Chromecast built-in, your TV's
menu language, time zone, and daylight savings
time settings should be set automatically to match
the settings on your mobile device.
If the settings are not correct or you want to change
the settings, see:
Setting the time zone and Daylight Saving Time
status .
Selecting the menu language.
If you connected cable TV without a box or an
external antenna to the ANT / CABLE IN jack, set up
the ANT / CABLE IN
jack and scan for channels. See:
Setting up the ANT / CABLE IN jack
Automatically scanning for channels.
Casting a video, movie, or TV show
After you set up Chromecast built-in on your TV and
mobile device, you are ready to cast videos, movies
and TV shows.
1. On your mobile device, make sure that Wifi is
turned on.
2. Open a Chromecast-enabled app.
3. Tap the video, movie, or TV program you want to
cast, then tap
4. Tap the device you want to cast to.
5. To stop casting, tap
Setting up the ANT / CABLE IN jack
If you connect an antenna or cable TV without a box to
the ANT / CABLE IN jack, you need to set up the jack
so your TV correctly displays channels.
1. Press MENU, press S or T to highlight
Installation, then press OK.
Accessibility
Picture
Sound
Options
timers
Get Help
< Installation
Menu Language English
Home / Retail Mode Home
Time Zone Eastern
Daylights Saving Time Off
Channel Tuning
Quick Setup
Reset TV
Installation
2. Highlight Channel Tuning, then press OK.
Accessibility
Picture
Sound
Options
timers
Get Help
< Channel Tuning
ANT/CABLE In Antenna
Aoto Tuning
Manual Tuning
Channel List
Installation
Antenna
Cable
3. Highlight ANT/CABLE In, then press OK.
4. Highlight your TV input source, then press OK.
Select:
Antenna if you connected an antenna to the
ANT / CABLE IN jack
Cable if you connected cable TV without a box to the
ANT / CABLE IN jack
5. Press EXIT to close the menu.
Understanding the basics
This section covers basic information for:
-Turning your TV on or off
-Selecting the video input source
- On-screen menu overview
OPERATION
-17-

3 Press “EXIT” to close the menu.
Notes
-If a CEC-compatible device is connected to an HDMI
jack, the HDMI® CEC icon appears in the list.
-If a connected CEC-compatible device has CEC-
compatible devices connected to it, a separate device
selection pop-up window appears. For example, the
pop-up window for a CEC-compatible DVD player
with a CEC-compatible audio receiver connected
might appear as follows:
-If you press INPUT to select a
CEC-compatible device from the pop-up
window, the device may turn on.
You can also change the video input source using the
virtual remote control. On the D-Pad page, tap (input
source), then use the arrows to select the video input
source. See D-Pad .
On-screen menu overview
Notes
-Depending on the signal source selected, you may
see different options on your screen.
-Menu items that are not selectable are grayed out.
Adjusting the TV picture
You can adjust various settings to improve the quality
of the TV picture. Also, you can reset all picture
settings to the factory default.
1. Press MENU, press S or T to highlight Picture,
then press OK.
2. Highlight an option, then press OK. You can select:
3. Press W X S or T to adjust the option or select a
setting, then press OK.
4. Press EXIT to close the menu.
Turning your TV on or off
1. Make sure that the power cord is connected
securely and correctly. For more information, see
Connecting power .
2. Press (power) to turn on your TV. The power
indicator turns off.
3. Press (power) to turn off your TV. Your TV enters
standby mode, and the power indicator turns red.
Warning
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
Note
If your TV does not receive an input signal for 15
minutes, it automatically goes into standby mode.
Last Mode Memory
If power is interrupted while you are viewing TV, the
Last Mode Memory feature automatically turns on
your TV when the power is restored.
Selecting the video input source
1. Press “INPUT” The Input Selection list opens.
2. Do one of the following:
-Press INPUT one or more times until the video input
you want is selected.
-Press S or T to highlight the video input you want,
then press OK.
NOTE
If you have not scanned for channels, Google
Chromecast appears at the top of the Input Selection
list.
Accessibilit y
Picture
Sound
Options
timers
Get Help
< Picture
Picture Mode Standard
Rest
Backlight 85
Contrast 92
Brightness 50
Color 50
Tint 50
Sharpness 29
Advanced Picture Settings
Display Settings
Installation
OPERATION
-18-

Adjusting the sound
This section covers:
Adjusting sound settings
Playing TV audio only
Adjusting sound settings
You can adjust sound settings to improve the sound
quality.
1. Press MENU, press S or T to highlight Sound, then
press OK.
2. Press W X S or T to adjust the option or select a
setting, then press OK.
3. Press EXIT to close the menu.
Adjusting the volume
Press VOL+ or VOL– to increase or decrease the
volume.
Press MUTE to mute the sound. Press MUTE again
to turn the sound back on.
Note
If you adjust a setting on the Sound menu while the
mute is active, the mute feature is cancelled.
Selecting a channel
Press CH+ or CH– to go to the next or previous
channel on the memorized channel list.
To select a channel from the Channel List, press
MENU, select Installation > Channel Tuning >
Channel List. Press CH+ or CH– to go to the next or
previous channel on the memorized channel list.
To select a digital sub-channel, press the CH+ or
CH– button to select the sub-channel or select the
sub-channel from the channel list.
Note
Button presses must be within two seconds of each
other.You can also use the virtual remote control to
select a sub-channel. On the Number page, tap the
main channel number, the dash, the sub-channel
number, then tap OK. See Number page on page 18.
On the virtual remote control on your mobile device,
tap the number buttons to enter the channel number
you want, then tap OK to immediately change the
channel. See Number Press(back) to go to the last
viewed channel.
Accessibilit y
Picture
Sound
Options
timers
Get Help
< Sound
Sound Mode Standard
Balance 0
Bass 0
Treble 0
Aavanced Sound Settings
TV Speakers Autio
MTS Stereo
Primary Audio Language English
Digital Audio Output
Rest
Digital Audio Selcetion
Installation
Viewing channel information
Press INFO. The following status information is
displayed:
- Current video input (for example ANT/CABLE or
AV)
-If ANT/CABLE is the current video input, either
CABLE (for cable TV) or ANT (for over-the-air
broadcasts)
-If ANT/CABLE is the current video input, channel
number
Digital signal strength indicator
- If the audio mode is analog, Stereo, Mono, or
SAP analog audio status
- If the input mode is HDMI®, Dolby® Digital, or
PCM
-Video resolution
Aspect ratio of incoming video signal (4:3 or
16:9)
- TV program or movie rating
- GameTimer (if set)
Pressing INFO also displays the following status
information for digital channels:
-Title
-Duration
-Detailed program description
Note
If you pressed INFO, press INFO again to close the
banner.
Controlling CEC-compatible devices
This section covers:
-Turning HDMI-CEC Control on or off
- Turning TV Auto Power on or off
- Turning Auto Standby on or off
-Turning Amplifier Control on or off
-Selecting the audio output
- Using the TV remote to control CEC-compatible
devices
-Using the TV menu to control CEC-compatible
devices
-Selecting the HDMI Input mode
HDMI CEC Control lets you control HDMI
CEC-compatible devices connected to the HDMI
jacks
on your TV using the remote control that came with
your TV. To use HDMI CEC Control, you must set the
Enable HDMI CEC Control setting on the HDMI CEC
Control Setup menu to On.
Notes
- HDMI cables must be used to connect
HDMI CEC-compatible devices to your TV.
- The connected device's HDMI CEC feature must be
turned on.
- If you connect an HDMI device that is not
HDMI CEC-compatible, none of the
HDMI CEC Control features work.
- Depending on the connected HDMI
device, some HDMI CEC Control features may not
work.
OPERATION
-19-