
English
Quck Start Gude
Insert the batteres nto the Remote Control
1
Insert two AAA/R3 or equvalent type batteres nsde.
Observe the correct polarty (+/-) when nsertng batteres
and replace the battery cover.
3
Connect the TV to the mans socket
2Connect the antenna to your TV
REAR SIDE OF THE TV
* The back connection options may dffer dependng on the model
--------- or ---------
After connectng the power cord to the mans socket, the
standby LED lghts up.
To swtch on the TV from standby mode ether;
1. Standby Press the button, a numerc button or
Programme +/- button on the remote control.
2a. Press the mddle of the sde functon swtch on the TV
n.
2b. Press the control button on the TV.
2c. Press the control button on the TV.
2d. Press the centre of the joystick on the TV in or push it
up/down.
* The appearance of the remote control buttons and the poston of
the control buttons on the TV may dffer dependng on the model
To swtch the TV on (dependng on the model)
4
or
12a
2b
2c
2d