JVC TH-D227B User manual

Install the battery correctly in the battery compartment. Normally the battery’s
positive polarity (+) will face up.
Remove the Plastic Strip from the Remote Control
The unit has a pre-installed
lithium CR2025 battery. Remove
the protective tab to activate the
remote control battery.
Connecting Your Soundbar to the TV
•
Operating Your Remote Control
•
Soundbar Sockets Overview
•
Quick Start Guide
Compact Soundbar
TH-D227B
Thank you for purchasing your new product.
We recommend that you spend some time reading this Quick Start
Guide in order that you fully understand how to connect your
Soundbar to your TV.
Use your Soundbar instruction manual and TV instruction manual to
choose the best way to connect your Soundbar and TV together.
Unpacking
•
Remove all packaging from the unit. Retain the packaging. If you
dispose of it please do so according to any local regulations.
To get the most from this product, you may need to buy an
Optical cable.
Battery Replacement for the Remote Control
1. Gently push the tab of the battery tray in and slide it free
from the remote control.
2. Replace with a new
battery
3. Slide the battery tray back into the remote
control.
Main Unit
Remote Control
(battery included)
Wall Bracket × 2
Screw × 4
Dowel × 4
Mains Cable
Coaxial Cable
3.5 mm to 3.5 mm
Stereo Audio Cable
Instruction Manual
Quick Start Guide
Connecting to the TV
Method 1: OPTICAL / COAXIAL Connection
Use an optical cable (not included) / coaxial cable (included) to connect the soundbar’s OPTICAL / COAXIAL socket to the OPTICAL OUT /
COAXIAL OUT socket of the external device. The simplest option is to connect your soundbar directly to your TV. If you connect the soundbar
to another external device (e.g. Blu-Ray player), you will hear the sound from that device through the soundbar.
After the connection is completed,
1. Press on the unit or remote control to switch on the unit.
2. Press SOURCE repeatedly to select Optical or Coaxial mode.
The unit may not be able to decode all digital audio formats from the input source. In this case, the Optical/Coaxial indicator will ash in white/orange, and the unit
will prompt “Unsupported format, please refer to the Instruction Book”. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, game
console, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting details) with Optical/Coaxial input.
Ensure the unit is disconnected from the mains socket before connecting it to other devices.
Optical cable (not included)
TV
Rear View of the Soundbar
Coaxial cable (included)
1. COAXIAL Socket
2. AC~Power Socket
3. OPTICAL Socket
1
2
35
4
4. AUDIO IN Socket
5. SERVICE ONLY Socket
Blu-ray Player / DVD
Player / Recorder
Set-top Box
Satellite Receiver Game Console Video Camera
DO NOT connect the soundbar to the TV through its Yellow/Red/White sockets.”
Or
TH-D227B_QSG_Final190329V4.indd 1 29/03/2019 17:22

•Connecting an External Audio Device
•Connecting to the Mains Supply
Soundbar
Unwind the mains cable to its full length. Connect the end of
the mains cable to the AC~ socket at the rear of the soundbar
then connect the mains plug to the mains socket and then
connect the mains plug to the mains socket. Make sure the
mains plug is fully inserted into the mains socket.
• Connecting the unit to any other power source may damage the unit.
• Ensure all audio connections of the unit are connected before connecting to the mains power socket.
• Make sure the mains plug is rmly inserted into the mains socket.
• To switch the unit o completely, remove the mains plug from the mains socket.
• Please turn the unit o completely to save energy when not in use.
• The mains cable are designed for this JVC soundbar only. DO NOT use the mains cable for other purposes.
For general information about this appliance and
handy hints and tips, please visit:
www.TeamKnowhow.com/discover or call
UK: 0344 561 1234
Ireland: 1 890 818 575
Well done, your new soundbar is now ready to use. You will nd that there are many exciting features available. To get to know all
these features, please take some time to read the instruction manual provided with your soundbar.
(QSG-TH-D227B-180329V4)
To the mains
socket
Rear View of the Soundbar
Use a 3.5 mm to RCA stereo audio cable (not included) or a 3.5 mm to 3.5 mm stereo audio cable (included) to connect the soundbar’s
AUDIO IN socket to the AUDIO OUT/HEADPHONES sockets of the external device.
After the connection is completed,
1. Press on the unit or remote control to switch on the unit.
2. Press SOURCE on the unit or remote control repeatedly to select AUDIO IN mode to play audio from your input device.
• Ensure the colours on the cable plugs match with the colours on the input and output sockets.
• DO NOT connect the soundbar and TV by using the AUDIO IN socket.
3.5 mm to 3.5 mm stereo
audio cable (included)
Rear View of the Soundbar
3.5 mm to RCA Stereo Audio Cable
(not included) Or
Blu-ray Player / DVD
Player / Recorder
Set-top Box
Satellite Receiver Game Console Video Camera MP3 Player or
Mobile Device
Front view of the main unit
(while pressing BASS/TREBLE button)
AUX IN
Indicator
(Green)
BT
Indicator
(Blue)
OPTICAL
Indicator
(White)
COAXIAL
Indicator
(Orange)
Select Equaliser (EQ) Eect
Press the EQ button on the unit or the CUSTOM/MOVIE/MUSIC button on the remote control to select the preset equaliser eects.
• When CUSTOM (Default) is selected, the COAXIAL indicator will ash (Orange) once.
• When MOVIE EQ is selected, the OPTICAL indicator will ash (White) once.
• When MUSIC EQ is selected, the BT indicator will ash (Blue) once.
• While the unit is in COAXIAL, OPTICAL, or AUDIO IN mode, it will automatically switch into MOVIE EQ eect.
• While the unit is in Bluetooth mode, it will automatically switch into MUSIC EQ eect.
Adjusting the Bass/Treble Level in CUSTOM EQ mode
1. Make sure that the EQ is set to CUSTOM mode.
2. Press BASS/TREBLE on the remote control. The AUX IN, BT, OPTICAL and COAXIAL indicators
will ash once.
3. Press VOL+/VOL– to adjust the bass/treble level.
4. After about 5 seconds, the AUX IN, BT, OPTICAL and COAXIAL indicators will ash once again to
indicate that the unit has exited BASS/TREBLE setup.
5. You may now press VOL+/VOL– to adjust volume.
• While adjusting the bass/treble level, the status indicator ashes quickly.
• While the BASS/TREBLE reaches its maximum or minimum level, the status will ash once if
you press VOL+/VOL– again.
The table below also shows the EQ mode supporting bass/treble adjustment.
EQ Mode Adjusting Bass Level? Adjusting Treble Level?
Custom 3 3
Movie N/A N/A
Music N/A N/A
•EQ and Bass/Treble Level Settings
TH-D227B_QSG_Final190329V4.indd 2 29/03/2019 17:22