JVC HR-S4500U User manual

HR-S4500U
VIDEO CASSETTE RECORDER
INSTRUCTION S
LPT0025-001C
For Customer Use:
Enter below the Model No. and
Serial No. which are located on the
rear of cabinet. Retain this
information for future reference.
Model No.
Serial No.
T
V
C H
+
T
V
V
O
L
–
T
V
C
H
–
T
V
V
O
L
+
TV
CANCEL
TIMER
START STOP DATE
MENU
OK
CH
POWER
TV/VCR
C. RESET
DBS DAILY(M-F)
AUX
WEEKLY
PROG
CHECK
PROG SP/EP SKIPSEARCH
DISPLAY
ENTER/OSD
CABLE/
DBS
123
456
789
0
2
4
1
3
EXPRESS PROGRAMMING
MULTI BRAND
REMOTE CONTROL UNIT
MBRSET
A/B
PLAY
REW
REC
STOP
PAUSE
FF
TIM E
SCAN
REW
INSERT
PAUSE
REC
STOP/EJECT
PLAY
A.DUB
FF
JOG
SHUTTLE
MENU OK
POWER
VIDEO
(MONO)
L –AUDIO– R
REC LINK
S-VHS ET
CH
SP VCR
Downloaded from: https://www.usersmanualguide.com/

2EN
Dear Customer,
Thank you for purchasing the JVC VHSvideo cassette recorder. Before use, please read the safety information and precautions
contained in the following pages to ensure safe use of your new VCR.
CAUTION S
WARNING:
TO PREVENT FIRE O R SHO CK
HAZARD, DO NOT EXPO SETHIS
U N IT TO RAIN O R M O ISTU RE.
CAU TIO N :
This video cassette recorder should be used with AC
120V`, 60Hz only.
To prevent electric shocks and fire hazards, DO NOT use
any other power source.
CAU TIO N :
TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTEN TION :
POUR ÉVITER LES CHOCSÉLECTRIQUES, INTRODUIRE
LA LAME LA PLUSLARGE DELA FICHE DANSLA BORNE
CORRESPONDANTEDELA PRISEET POUSSER
JUSQU'AU FOND.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of
uninsulated "dangerous voltage" within the product's enclosure
that may be of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.
Failure to heed the following precautions may result in
damage to the VCR, remote control or video cassette.
1. DO NO T place the VCR . . .
... in an environment prone to extreme temperatures or
humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are
generated.
... on a surface that is unstable or subject to vibration.
2. DO NO T block the VCR’s ventilation openings.
3. D O NO T place heavy objects on the VCR or remote control.
4. D O N OT place anything which might spill on top of the
VCR or remote control.
5. AVOID violent shocks to the VCR during transport.
** M O ISTU RE CO N D EN SATIO N
Moisture in the air will condense on the VCR when you move it
from a cold place to a warm place, or under extremely humid
conditions—just as water droplets form on the surface of a glass
filled with cold liquid. Moisture condensation on the head drum
will cause damage to the tape. In conditions where condensa-
tion may occur, keep the VCR’s power turned on for a few hours
to let the moisture dry before inserting a tape.
**ABO U T H EAD CLEANIN G
Accumulation of dirt and other particles on the video heads
may cause the playback picture to become blurred or inter-
rupted. Be sure to contact your nearest JVC dealer if such
troubles occur.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of
cable entry as practical.
CAU TION :
Changes or modifications not approved by JVC could void
user's authority to operate the equipment.
nCassettes marked "S-VHS" and "VHS" can be used with this
video cassette recorder. However, S-VHS recordings are
possible only with cassettes marked "S-VHS".
By using S-VHS ET it is possible to record and play back with
S-VHS picture quality on VHScassettes with thisVCR.
nAs an ENERGY STAR®Partner, JVC has determined that this
product or product model meets the ENERGY STAR®guidelines
for energy efficiency.
VCR Plus+C3and PlusCode are trademarks of Gemstar Develop-
ment Corporation.
The VCR Plus+ system is manufactured under license from
Gemstar Development Corporation.
DSS
TM is an official trademark of DIRECTV, Inc., a unit of GM
Hughes Electronics. PRIMESTAR is a registered service mark of
Primestar Partners, L.P. DISH NetworkTM is a trademark of
Echostar Communications Corporation.
MOVIEADVANCETM is a trademark of SRT, Inc. A Jerry Iggulden
invention licensed in association with Arthur D. Little Enter-
prises, Inc.
Downloaded from: https://www.usersmanualguide.com/

EN 3
IMPORTANT PRODUCT
SAFETY INSTRUCTIONS
Electrical energy can perform many useful functions. But
improper use can result in potential electrical shock or fire
hazards. This product has been engineered and manufactured
to assure your personal safety. In order not to defeat the built-in
safeguards, observe the following basic rules for its installation,
use and servicing.
ATTENTIO N:
Follow and obey all warnings and instructions marked on your
product and its operating instructions. For your safety, please
read all the safety and operating instructions before you operate
this product and keep this booklet for future reference.
INSTALLATION
1. Grounding or Polarization
(A) Your product may be equipped with a polarized alternating-
current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way.
This is a safety feature.
If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the polarized plug.
(B)Your product may be equipped with a 3-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will
only fit into a grounding-type power outlet. This is a safety
feature.
If you are unable to insert the plug into the outlet, contact
your electrician to replace your obsolete outlet. Do not
defeat the safety purpose of the grounding-type plug.
2. Power Sources
Operate your product only from the type of power source
indicated on the marking label. If you are not sure of the type of
power supply to your home, consult your product dealer or
local power company. If your product is intended to operate
from battery power, or other sources, refer to the operating
instructions.
3. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or
electric shock.
4. Power Cord Protection
Power supply cords should be routed so that they are not likely
to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
5. Ventilation
Slots and openings in the cabinet are provided for ventilation.
To ensure reliable operation of the product and to protect it
from overheating, these openings must not be blocked or
covered.
• Do not block the openings by placing the product on a bed,
sofa, rug or other similar surface.
• Do not place the product in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
6. Wall or Ceiling M ounting
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION
810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC – NATIONAL ELECTRICAL CODE
ELECTRIC SERVICE
EQUIPMENT
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE, ANSI/NFPA 70
GROUND CLAMP
ANTENNA INSTALLATION
INSTRUCTIONS
1. O utdoor Antenna Grounding
If an outside antenna or cable system is connected to the
product, be sure the antenna or cable system is grounded so as
to provide some protection against voltage surges and built-up
static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of grounding
connectors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
2. Lightning
For added protection for this product during a lightning storm,
or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna
or cable system. This will prevent damage to the product due to
lightning and power-line surges.
3. Power Lines
An outside antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be
taken to keep from touching such power lines or circuits as
contact with them might be fatal.
Downloaded from: https://www.usersmanualguide.com/

4EN
SERVICING
1. Servicing
If your product is not operating correctly or exhibits a marked
change in performance and you are unable to restore normal
operation by following the detailed procedure in its operating
instructions, do not attempt to service it yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
2. D amage Requiring Service
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a.When the power supply cord or plug is damaged.
b.If liquid has been spilled, or objects have fallen into the
product.
c.If the product has been exposed to rain or water.
d.If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation.
e.If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in
performance—this indicates a need for service.
3. Replacement Parts
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original
part. Unauthorized substitutions may result in fire, electric
shock or other hazards.
4. Safety Check
Upon completion of any service or repairs to this product, ask
the service technician to perform safety checks to determine
that the product is in safe operating condition.
HOW TO USE THIS INSTRUCTION
MANUAL
●All major sections and subsections are listed in the Table Of
Contents on page 5. Use this when searching for information
on a specific procedure or feature.
●The Index on pages 65–68 lists frequently-used terms, and the
number of the page on which they are used or explained in
the manual. This section also illustrates the controls and
connections on the front and rear panel, the front display
panel and the remote control.
●The Zmark signals a reference to another page for
instructions or related information.
●Operation buttons necessary for the various procedures are
clearly indicated through the use of illustrations at the
beginning of each major section.
BEFORE YOU INSTALL YOUR NEW
VCR . . .
. . . please read the sections/ literature listed below.
●”Cautions” on page 2
●”Important Products Safety Instructions” on the previous pages
USE
1. Accessories
To avoid personal injury:
• Do not place this product on an unstable cart, stand, tripod,
bracket, or table. It may fall, causing serious injury to a child
or adult, and serious damage to the product.
• Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product.
• Use a mounting accessory recommended by the
manufacturer and follow the manufacturer’s instructions for
any mounting of the product.
• Do not try to roll a cart with small casters across thresholds or
deep-pile carpets.
2. Product and Cart Combination
A product and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the product and
cart combination to overturn.
3. Water and M oisture
Do not use this product near water—for example, near a bath
tub, wash bowl, kitchen sink or laundry tub, in a wet basement,
or near a swimming pool and the like.
4. O bject and Liquid Entry
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or short-
out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
5. Attachments
Do not use attachments not recommended by the manufacturer
of this product as they may cause hazards.
6. Cleaning
Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners. Use a damp cloth
for cleaning.
7. Heat
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
PORTABLE CART WARNING
(Symbol provided by RETAC)
Downloaded from: https://www.usersmanualguide.com/

EN 5
CONTENTS
Time Sca n ................................................... 3 8
Variable-Speed Search/Reverse Motion Playback .....38
Skip Search ..............................................................39
Time Scan Audio ......................................................40
TIM ER RECORDIN G 4 1
VCR Plus+ Tim er Progra m ming ................... 4 1
VCR Plus+ Setup ......................................... 4 3
Ex press Tim er Progra m m ing ....................... 4 5
Check, Cancel And Revise Programs........................47
Auto SP→EPTimer ...................................................48
Auto Timer ...............................................................48
Insta nt Tim er Recording (ITR) ....................... 4 9
Autom a tic Sa tellite Progra m Recording ....... 5 0
EDITIN G 5 1
Edit To O r From Another VCR ...................... 5 1
Edit From A Ca m corder ............................... 5 2
Insert Editing .............................................. 5 4
Audio Dubbing ........................................... 5 6
SPECIAL FEATURES 5 7
TV Multi-Brand Remote Control ..............................57
Cable Box Multi-Brand Remote Control ...................58
DBSReceiver Multi-Brand Remote Control ..............59
Child Lock ...............................................................60
Control Two JVC VCRs .............................................60
TROUBLESHO O TIN G 6 1
Pow er ........................................................ 61
Ta pe Tra nsport ............................................ 6 1
Pla y ba ck .................................................... 6 1
Recording ................................................... 6 1
Timer Recording .......................................... 6 2
O ther Problem s .......................................... 6 3
QUESTION S AN D AN SW ERS 6 4
Pla y ba ck .................................................... 6 4
Recording ................................................... 6 4
Timer Recording .......................................... 6 4
IN DEX 6 5
List O f Terms ............................................... 6 5
Front V iew .................................................. 6 6
Rea r V iew .................................................. 6 7
Front Displa y Pa nel ..................................... 6 7
Rem ote Control ........................................... 6 8
S
PECIFICATIO N S 6 9
F
O R SERVICIN G (O nly in U.S.A.) 7 0
WARRAN TY (O nly in U.S.A.) 7 1
IN STALLIN G YOUR N EW VCR 6
Connections ........................................... 6
Basic Connections .....................................................6
S-Video Connection ................................................... 7
IN ITIAL SETTIN GS 8
Plug & Play .................................................. 8
Language ................................................... 10
Clock .......................................................... 11
Preparation ..............................................................11
Semi-Auto ................................................................ 12
Manual ....................................................................13
Tuner .......................................................... 14
Set Receivable Channels.......................................... 14
Add Or Delete A Channel ........................................15
Ca ble Box Control ....................................... 1 6
Situate And Connect Controller ...............................16
Set Cable Box Output Channel &
Cable Box Brand......................................................17
DBS Receiver Control ................................... 1 9
Situate And Connect Controller ...............................19
Set DBSReceiver Output Channel &
DBSReceiver Brand ................................................20
SIM PLE PLAYBACK AN D RECORDIN G 2 2
Simple Playback ......................................... 22
Sim ple Recording ........................................ 2 3
PLAYBACK AN D RECORDIN G
FEATURES 2 4
Pla y ba ck Fea tures ...................................... 2 4
Still Picture/Frame-By-Frame Playback .....................24
Slow Motion/Reverse Slow Motion ..........................24
Index Search ............................................................25
High-Speed Search ..................................................25
Manual Tracking ......................................................25
Video Stabilizer .......................................................26
Instant ReView .........................................................27
Repeat Playback ......................................................27
Counter Reset ..........................................................27
Tape Position Indicator ............................................27
Next-Function Memory............................................27
Superimpose............................................................28
Select The Soundtrack ..............................................29
Movie Advance........................................................30
AV COMPU LINK Playback .....................................31
Active V ideo Ca libra tion ............................. 3 2
Preparation ..............................................................32
Recording ................................................................33
Playback ..................................................................33
Recording Fea tures ..................................... 3 4
Record One Program While Watching Another ........34
Display Elapsed Recording Time .............................. 34
Display Tape Remaining Time ..................................34
S-VHS(Super VHS), S-VHS ET and VHS...................35
Super VHS ET ..........................................................36
Stereo And SAP (Second Audio Program) .................37
To Record SAP Programs.......................................... 37
Downloaded from: https://www.usersmanualguide.com/

6EN
IN STALLING YO UR NEW VCR
CHECK CONTENTS
1
Make sure the package contains all of the accessories
listed in “SPECIFICATIONS” (Zpg. 69).
SITUATE VCR
2
Place the VCR on a stable, horizontal surface.
CONNECT VCR TO TV
3
The connection method you use depends on the type of
TV you have.
RF Connection
● To Connect To A TV With NO AV Input Terminals . . .
a– Disconnect the TV antenna from the TV.
b– Connect the TV antenna cable to the ANTENNA
IN jack on the rear of the VCR.
c– Connect the supplied RF cable between the TV
OUT jack on the rear of the VCR and the TV’s
antenna terminal. Set TV on CH3 or CH4 corre-
sponding to the CH3 – CH4 switch setting on the
back of the VCR.
AV Connection
●
To Connect To A TV With AV Input Terminals . . .
a– Connect the antenna, VCR and TV as shown in
the illustration.
b– Connect an Audio/Video Cable between the AUDIO
OUT and VIDEO OUT jacks on the rear of the VCR
and the AV IN jacks on the TV. Set your TV in video
input mode or A/V input mode. Refer to the TV
Instruction Manual.
S-VIDEO Connection
●
If you have a TV with S-VIDEO input terminals, see
"S-VIDEO Connection" on page 7.
CONNECT VCR TO
POW ER SOURCE
4
Connect the power plug to an AC outlet.
●The clock and tuner channels will automatically be
set when the antenna is connected and when the AC
is first connected to the VCR (Zpg. 8).
(If "Auto" or "CH" is displayed on the front display
panel before the VCR is powered on, the clock and
tuner channels are being set automatically. Wait for
the time to be displayed on the front display panel
before powering on the VCR.)
FINAL PREPARATION FOR
USE
5
Power on the VCR and if you are connected to the TV
using the RF connector, select the VCR channel (3 or 4)
by setting the switch on the rear of theVCR as shown in
the illustration.
You can now perform simple playback (Zpg. 22) or
simple recording (Zpg. 23).
N OTES:
●
TheVCR channel is the channel on the TV which will display
the audio and video signals from the VCR. The VCR's CH3-
CH4 switch, on the back of the VCR, sets the VCR channel to
CH3 or CH4.
● The CH3–CH4 switch is preset to the CH3 position.
Set to CH4 if CH3 is used for broadcasting in your area and
set the channel on the TV to correspond to the VCR's CH3–
CH4 switch setting.
● If you are connected to the TV using the RF connector, you may
need to press CH UP and then CH DOWN on theTV when
switching between theTV and VCRinput modes, to maintain good
picture quality.
● Even if you are using AV cables to connect your VCR to your
TV, you must also connect it using the RF cable. This will
ensure that you can record one show while watching another
(
Z pg. 34).
● For full identification of the VCR's rear panel, refer to the
Index (REARVIEW
Z pg. 67).
Connections
Antenna or Cable
Flat Feeder
Coaxial Cable
AC Power Cord
Back of VCR
AC Outlet
75 ohm terminal
TV
Matching
Transformer
(Not supplied)
TV OUT
Audio/Video
Cable (supplied)
RF Cable
(supplied)
CH4
CH3
Back of VCR
ANTENNA IN
(Antenna or Cable input)
Ba sic Connections
Downloaded from: https://www.usersmanualguide.com/

EN 7
ANTENNA IN
CH4
CH3
REMOTE
PAUSE AV COMPULINK
CABLE
BOX
VIDEO
AUDIO
VHF/UHF
L
(MONO)
R
OUT
TV
OUT IN
OUT
S VIDEO
IN
TV OUT
RF Cable (supplied)
Matching Transformer
(not supplied)
AC Power
Cord
Audio/Video Cable
(supplied)
TV
ANTENNA IN
(Antenna or Cable input)
Back of VCR
75 ohm terminal
AC Outlet
Antenna or Cable
Flat Feeder
Coaxial Cable
N OTES:
●
To make the most of the Super VHS picture performance we
recommend that you use the supplied S-VIDEO cable to
connect your VCR to a TV with an S-VIDEO input connector.
● To operate the VCR with your TV using the S-VIDEO connec-
tion, set your TV to the AV mode using the TV's remote
control.
You can also use the TV/ VCR button on the VCR's remote
control to set your TV to the AV mode. (
Z pg. 57)
S-VIDEO Connection
CO NN ECT VCR TO TV
a– Connect both the RF cable and the AV cables to the TV as
explained in step 3of "Basic Connections" (Zpg. 6).
b– Connect the S-Video cable between the S-VIDEO OUT
jack on the rear of the VCR and the S-VIDEO IN jack on
the TV.
S-Video Cable
(supplied)
SVIDEO IN
SVIDEO OUT
Downloaded from: https://www.usersmanualguide.com/

8EN
IN ITIAL SETTINGS
Plug & Pla y
The Plug & Play function sets the clock and tuner channels
automatically when power is first connected to the VCR. The
antenna cable must be connected for the Plug & Play function.
The time and date can be set automatically from clock setting
data that is transmitted by one of the regular TV broadcast
channels. We call thisTV channel the “Host Channel” and it is
a PBSchannel in your area.
PLUG & PLAY SETUP
1
Connect the antenna cable to the VCR (Zpg. 6). Then
connect the VCR’s power plug to an AC outlet. Do not
power on the VCR. The clock and tuner channels will
be set automatically.
N OTES:
●
Auto clock set is performed first. The auto clock set
function scans all the channels received by your VCR
to find the Host Channel and then sets the clock.
"Auto" blinks on the front display panel during Auto
clock set.
● Auto channel set is performed next. The auto channel
set function scans all the channels that are receivable
by your VCR. It then automatically assigns each
receivable channels to the CH
5∞
(+/ –) buttons. It
skips non-receivable channels. During auto channel
set the channel numbers are displayed as they are
scanned and set.
● When Plug & Play has been completed successfully the
correct time is displayed.
● If an incorrect time or "– –:– –" appears on the display
panel, see "What To Do If Plug & Play Has Failed" on
next page.
ATTENTIO N
If you use a cable box, Plug & Play will not function; set
the clock and tuner channels manually. (Zpg.11 – 15)
Auto Clock Set/ Auto Tuner Set
IM PO RTAN T
●Don’t press any buttons on the VCR or remote while Plug
& Play is in progress.
●If you perform Plug & Play successfully, there’s no need to
perform the Clock (Zpg. 11) and Tuner (Zpg. 14)
procedures. If, however, you want to add or delete
channels, refer to “Add Or Delete A Channel” on page 15.
During Initial Auto Clock Set
"Auto" blinks.
During Auto Channel Set
The channel numbers are displayed
as they are scanned and set.
* If an incorrect time or "– –:– –" appears on the display panel, see "What To Do If Plug & Play Has Failed" on next page.
Plug & Play Completed
The current time (including
AM/PM) is displayed.
Downloaded from: https://www.usersmanualguide.com/

EN 9
IN FO RM ATIO N
●If "AUTO CLOCK" is set to "ON" at the Clock Set screen on page 12, the clock will be adjusted automatically by the host
channel every hour on the hour (except for 11:00 PM, midnight, 1:00 AM and 2:00 AM) by the incoming PBSchannel clock
setting data. (This automatic clock adjustment can only be performed when the VCR’s power is turned off. The clock will be
adjusted on the hour based on the time displayed on the VCR, not on the actual real time.) The default setting of "AUTO
CLOCK" is "ON".
●If the memory backup fails, because of a power outage or because the AC was removed from the VCR, Plug & Play will be
performed when power is restored to the VCR.
What To Do If Plug & Play Has Failed
●If an incorrect time is displayed on the front display panel, you may be receiving the clock setting data of a PBSchannel from
an adjacent time zone, or an incorrect PBSchannel from a cable TV system. In this case, perform the Semi-Auto (Zpg. 12) or
Manual Clock Set (Zpg. 13) procedure. Auto channel set has already taken place and it need not be set again.
●If “- -:- -” appears on the display, your antenna cable may not be connected to the VCR or there may not be a Host PBSsignal
available in your area. Ensure that the antenna cable is connected correctly. Then power on and power off theVCR; the Plug &
Play function will be automatically reactivated and "Auto" will be displayed on the VCR's front panel. If Plug & Play is not
performed but the antenna cable is connected correctly, perform the Manual Clock Set procedure (Zpg. 13). Auto channel set
has not yet taken place, so please also perform the “Set Receivable Channels” procedure (Zpg. 14).
Downloaded from: https://www.usersmanualguide.com/

10 EN
IN ITIAL SETTIN GS (cont.)
La ngua ge
ThisVCR offers you the choice to view on-screen messages in
English, Spanish or French (not including messages superimposed
on the TV picture). Select the desired language using this
procedure. The default setting is "ENGLISH".
TURN ON THE VCR
1
Press PO W ER.
ACCESS MAIN MENU
SCREEN
2
Press M EN U .
ACCESS INITIAL SET
SCREEN
3
At the Main Menu screen,
move the highlight bar
(arrow) to “ INITIAL SET”
by pressing CH5∞or
TIM E SCAN %fi, then
press O K or TI M E SCAN # .
SELECT LANGUAGE
4
Move the highlight bar
(arrow) to "LANGUAGE"
by pressing CH 5∞or
TIM E SCAN %fi, then
press O K or TI M E SCAN #
to select the desired
language.
RETURN TO NORMAL
SCREEN
5
Press M EN U .
Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
MAIN MENU
FUNCTION SET
TUNER SET
=INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (M ENU) TO END
INITIAL SET
CLOCK SET
=LANGUAGE ENGLISH
GUIDE CHANNEL SET
CABLE BOX SET
DBS RECEIVER SET
SELECT WITH (5,∞) AND (OK)
PRESS (M ENU) TO END
PO W ER
123
456
789
0
2
4
1
3
PO W ER
OK
M EN U
M EN U
OK
TIM E SCAN
CH5∞
Downloaded from: https://www.usersmanualguide.com/