König Electronic SEC-MON43 User manual

2013-08-21
SEC-MON43
SEC-MON46
MANUAL (p. 2)
CCTV monitor

2
ENGLISH
CCTV monitor
1. Introduction:
LCD/TFT monitor for observation and security. Improved LCD panel for 24-hour CCTV systems. High stability
pictures and clear colors. Advanced circuits for a better capability to deal with the video signal and reduce
interference on the monitor. Equipped with a VGA connection.
Description - front:
MENU −+
Enter MENU Decrease value Increase value
Select options
Auto Power
Auto adjust (Escape MENU) Green, monitor ON
Select settings in MENU Red, monitor Standby
2. Use of the MENU:
Press the MENU button to enter the MENU.
Use “+” and “−” and press “MENU” to confirm the selection of the various menus and submenus.
Use “+” and “−” to adjust.
Use “AUTO” to exit.
2.1 Color:
Select “COLOUR” and press “MENU” to confirm. The following screen will appear showing the display
settings.
Contrast:
This setting is used to change the contrast between the black and white areas of the image. Clear resolution
of the white, black and grey scales can be obtained by correctly setting the contrast. Press “+” or “−” to
increase or decrease the parameter settings.
Brightness:
This setting is used to change the brightness of the image according to any ambient light. Press “+” or “−” to
increase or decrease the parameter settings.

3
Color temperature:
This setting is used to adjust the color temperature. Press “+” or “−” to select the desired value.
Color adjust:
This setting is used to enter the sub-menu of color adjustments.
2.2 Image setting:
Select “PICTURE” and press “MENU” to confirm. The following screen will appear showing the display
settings.
H.Position:
This setting is used to move the image left and right. “−” moves the screen image left. “+” moves the screen
image right.
V.Position:
This setting is used to move the picture image up and down. “−” moves the screen image downward. “+”
moves the screen image upward.
Phase:
This setting is used to minimize distortions and video instability. Press “+” or “−” to increase or decrease the
parameter settings.
Clock:
This setting is used to minimize strips on the video. Press “+” or “−” to increase or decrease the parameter
settings.
Sharpness:
This setting is used to optimize the sharpness of the image. Select a value between 1 to 5.
2.3 Function:
Select “FUNCTION” and press “MENU” to confirm. The following screen containing settings related to image
dimensions and position of the image on the screen will appear.

4
Auto adjusts:
This setting is used to automatically adjust the video setup. Press “+” or “−” to select the parameter settings.
Auto color:
This setting is used to automatically adjust the colors of the image. Press “+” or “−” to select the parameter
settings.
2.4 OSD Menu:
Select “OSD MENU” and press “MENU” to confirm. The following screen will appear containing the OSD
settings.
Language:
This setting is used to select the language of the controls. Press “+” or “−” to select between the available
options.
OSD H. Pos:
This setting is used to change the horizontal position of the OSD panel. Press “+” to move the image to the
right. Press “−” to move the image to the left.
OSD V. Pos:
This setting is used to change the vertical position of the OSD panel. Press “+” to move the image upward.
Press “−” to move the image downward.

5
OSD Timer:
This setting is used to set the time for which the OSD panel appears on the display (3 to 27 sec). Press “+” or
“−” to increase or decrease the parameter settings.
2.5 MISC
Select “MISC” and press “MENU” to confirm. The following screen will appear:
(Leave the function of Mode select)
Reset:
Resets to factory settings.
(Leave the function of Volume)
Specifications:
• Response time: 6 ms
• Resolution: 1280x1024
• Brightness: 450 cd/m2
• Contrast ratio: 700:1
• Screen life span: 50.000 hours (intensive use)
• Viewing angle: 170°
• System: PAL/NTSC
• Inputs: VGA
• Power: DC 12 V, 5 A
Installation precautions:
• To prevent overheating of the monitor, put it in a position which allows the flow of air through the slots in the
casing.
• Ensure at least 5 cm of free space when installing inside a rack. For the same reason, do not install near
sources of heat, such as radiators or hot air ducts. Keep away from direct sunlight. Do not install in areas
subject to excessive dust, mechanical vibrations or shocks.
• Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or
covered.
• Do not place the monitor on an unstable surface, such as a tottering or slanted table. The monitor could fall
causing injury or mechanical failures.
• Do not place heavy or heat generating objects on top of the monitor, this could damage the casing and/or
increase internal temperature causing faults.
• Do not cover the monitor with a cloth while it is running to prevent deforming the external casing and
overheating the internal parts resulting in risk of fire, electrocution and mechanical failure.
• Keep magnets and magnetized objects away from the monitor to prevent faults.
• Wait for a while before operating a device after transporting it from a cold place to a warm place and vice
versa. Wait on average for three hours: this will allow the device to adapt to the new ambient temperature,
humidity, etc.

6
Safety precautions:
To reduce risk of electric shock, this product should ONLY be
opened by an authorized technician when service is required.
Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water or
moisture.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of the product or damage caused
due to incorrect use of this product.
General:
- Designs and specifications are subject to change without notice.
- All logos, brands or brand logos and product names are trademarks or registered trademarks of their
respective holders and are hereby recognised as such.
- This manual was produced with care. However, no rights can be derived. König Electronic can not accept
liability for any errors in this manual or their consequences.
- Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical and electronic products should
not be mixed with general household waste. There is a separate collections system for these products.
This product has been manufactured and supplied in compliance with all relevant regulations and directives,
valid for all member states of the European Union. It also complies with all applicable specifications and
regulations in the country of sales.
Formal documentation is available upon request. This includes, but is not limited to: Declaration of Conformity
(and product identity), Material Safety Data Sheet and product test report.
Please contact our customer service desk for support:
via website: http://www.nedis.com/en-us/contact/contact-form.htm
via e-mail: [email protected]
via telephone: [phone] (during office hours)
NEDIS B.V., De Tweeling 28, 5215 MC ’s-Hertogenbosch, THE NETHERLANDS