K-Rain K Connect CO3011 User manual

2
WARRANTY
CO3011
User
Manual

2 of 16
iOS is a trademark of Apple Inc. Android is a trademark of Google LLC. The
Android robot is reproduced or modified from work created and shared by
Google and used according to terms described in the Creative Commons 3.0
Attribution License. The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Holman
Industries is under license. Other trademarks and trade names are those of their
respective owners. All other content is Copyright©HolmanIndustries2022.

3 of 16
Contents
Overview 4
Components 4
Key Features 5
Installation 6
Batteries 6
Installing Holman Home 7
Bluetooth®Connection 8
Adding your K Connect Tap Timer to Holman Home 8
Operation 10
K Connect Home Screen 10
Manual Watering 11
Scheduled Watering 12
Maintenance 13
Batteries 13
Connection Issues 13
Warranty 15

4 of 16
Overview
Components
1. 20/25mm BSP
reducing bush
2. 25mm tap adaptor
3. TAP TIMER BUTTON
4. Watering LED
5. 20mm BSP outlet
6. Battery compartment:
requires 3× AAAalkaline
batteries only
ÁDo not mix old and
new batteries
2
3
Model no: CO3001
4
5
1
6

5 of 16
Key Features
LSet and check irrigation
schedules from the
Holman Home app
LManually turn off the
water timer using the
TAP TIMER BUTTON
LWater with two schedule
types: NORMAL
SCHEDULE and MISTING
LWatering delay options:
24, 48 and 72 hours
LLow power indicator
LBuilt-in filter: Clean
this regularly and
replace when worn to
prolong the life of your
K Connect timer
LWorking pressure:
50-1200 kPa
LMaximum flow: 25 L/min
LWater and dust
protection rating: IP54
LWorking temperature:
4°-50°C
ÁIn temperatures below 4°C, your
K Connect should be removed from the tap and
stored indoors to avoid freezing damage
Overview

6 of 16
Installation
Batteries
1. Unlock the front
face by twisting it
counter-clockwise (a)
2. Pull out the sealed battery
compartment lid (b)
3. Install 3× AAA alkaline
batteries (c)
4. Replace the battery
compartment lid
5. Replace the front face by
ensuring the hooks lock
into the body (d) and twist
the face clockwise (e)
a
a
b
c
d
e

7 of 16
Installation
Installing Holman Home
1. Download Holman Home
to your mobile device
via the App Store
or Google Play
2. Open Holman Home
on your mobile device
®You may be prompted to
allow notifications–the
app can still function if
you choose to opt out
3. Tap SIGN UP
4. Read our User Agreement
and Privacy Policy
and tap AGREE if you
wish to proceed
5. Follow the prompts to
register a Holman Home
account with your
email address
ÁEnsure your country
details are correct
at this stage
®You may be prompted
to allow access to
your location. This
allows the app to show
weather information-it
will still function if you
choose to opt out

8 of 16
Installation
Bluetooth®Connection
LEnsure your smartphone
is at most 20m away from
your KConnect tap timer
during the connection
process or when setting
watering plans
LYour K Connect tap
timer will perform preset
schedules from the app,
even if your smartphone
is out of Bluetooth®
connection range
Adding your K Connect Tap Timer to Holman Home
1. Ensure Bluetooth®is
enabled on your device
2. Open Holman Home
on your device
3. Open the HOME screen
in Holman Home
and tap  (f) and
ADD DEVICE (g)
f
g

Adding your K Connect Tap Timer to Holman Home
Installation
®Your K Connect
should appear under
DISCOVERING
DEVICES (h)
®If your K Connect
doesn’t appear under
DISCOVERING DEVICES,
check the batteries
4. Tap ADD (i)
5. On the following
ADDDEVICE screen, tap
 (j) for your K Connect
6. After your K Connect is
installed, tap DONE (k)
h
i
j
k

10 of 16
Operation
K Connect Home Screen
1. Back to Holman Home
2. Battery status
3. Watering status
4. TIME REMAINING
5. Watering START/STOP
6. Settings 
7. STATUS
8. MANUAL
9. STARTS
10. WATERING DELAY settings
1
8
7
2
10
4
6
3
5
9

Manual Watering
1. Tap MANUAL to access
manual watering controls
2. Tap MANUALRUNTIME
(a) to access timer controls
3. Use the scroll wheels (b)
to set the HOURS and
MINS for the watering,
then tap SAVE (c)
4. Tap (d) to start
watering for the saved
duration and (e) to stop
watering early as desired
Operation
a
c
de
b
b

Scheduled Watering
1. Tap STARTS to
access scheduled
watering controls
2. Tap SETTINGS next to
the desired START (f) to
access the scheduling
®This allows the following
for each START:
• Enable/disable START
• Set the START TIME
• Select watering DAYS
• Set the RUN TIME
®Tap MISTING (g) to
access timing ideal
for misting. These
settings also include:
• ON TIME for the
misting cycle
• DELAY TIME for
the misting cycle
Operation
f
g
f
f
f

Maintenance
Batteries
®Remove batteries from your K Connect
taptimer during periods of non-use
ÁBattery leakage can cause corrosion
and damage to your K Connect tap timer
Connection Issues
®If your K Connect tap timer shows as disconnected
after replacing the batteries, please wait a few minutes
for Holman Home to update your device status
®For additional support with connection issues,
please contact our Customer Service team
For support email
[email protected] or
contact the friendly
Customer Service
team at Holman
Industries on
08 9416 9999
 11 Walters Drive, Osborne Park WA 6017

14 of 16

15 of 16
Warranty
2 Year Replacement Guarantee
Holman Industries offers a 2 year
replacement guarantee with this product.
In Australia our goods come with guarantees
that cannot be excluded under the Australian
Consumer Law. You are entitled to a
replacement or refund for a major failure
and compensation for any other reasonably
foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and
the failure does not amount to a major failure.
As well as your statutory rights referred to
above and any other rights and remedies
you have under any other laws relating
to your Holman product, we also provide
you with a Holman guarantee.
Holman Industries guarantees this product
against defects caused by faulty workmanship
and materials for 2 years domestic use from
the date of purchase. During this guarantee
period Holman Industries will replace any
defective product. Packaging and instructions
may not be replaced unless faulty.
In the event of a product being replaced during
the guarantee period, the guarantee on the
replacement product will expire 2 years from
the purchase date of the original product,
not 2years from the date of replacement.
To the extent permitted by law, this Holman
Replacement Guarantee excludes liability
for consequential loss or any other loss or
damage caused to property of persons arising
from any cause whatsoever. It also excludes
defects caused by the product not being used
in accordance with instructions, accidental
damage, misuse, or being tampered with
by unauthorised persons, excludes normal
wear and tear and does not cover the cost of
claiming under the warranty or transporting
the goods to and from the place of purchase.
Should you suspect your product may
be defective and need some clarification
or advice please contact us directly:
1300 716 188
[email protected]m.au
11 Walters Drive, OsbornePark 6017 WA
If you are certain your product is defective and
is covered by the terms of this warranty, you will
need to present your defective product and your
purchase receipt as proof of purchase to the
place you purchased it from, where the retailer
will replace the product for you on our behalf.

We really appreciate having
you as a customer and
would like to say thank
you for choosing us.
We recommend registering your
new product on our website.
This will ensure we have a copy
of your purchase and activate
an extended warranty. Keep up
to date to with relevant product
information and special offers
available through our newsletter.
Scan here, or visit
k-rain.com.au/register
for more info