Kärcher Ringler RI 311 W2G Installation instructions

Ringler GmbH
Robert-Bosch-Straße 4–8 Fon [phone] [email protected]
73550 Waldstetten [Germany] Fax [phone] www.ringler-gmbh.de
Fon [phone]
Translation of the Original Operating Manual
RI 311 W2G / W2E


GERMANY
Date of Delivery:
2015-12-10
GBR

2/53
Copyright
Copyright by
Ringler GmbH
Robert-Bosch-Straße 4-8
73550 Waldstetten
GERMANY

3/53
1Safety Instructions.................................................................................................................................7
1.1 Terms................................................................................................................................................. 7
1.1.1 Operation....................................................................................................................................... 7
1.1.2 Maintenance .................................................................................................................................. 7
1.1.3 Qualified Staff ................................................................................................................................ 7
1.2 Symbols............................................................................................................................................. 7
1.3 General safety information................................................................................................................. 9
2Delivery, internal transportation, unpacking.....................................................................................10
2.1 Delivery............................................................................................................................................ 10
2.2 Internal transport.............................................................................................................................. 10
2.2.1 Dimensions and weight................................................................................................................ 10
2.3 Unpacking........................................................................................................................................ 10
2.4 Packaging material.......................................................................................................................... 10
2.5 Storage conditions........................................................................................................................... 11
2.5.1 Information for storage................................................................................................................. 11
3Appliance description..........................................................................................................................12
3.1 Intended Use ................................................................................................................................... 12
3.1.1 Dust class "L"............................................................................................................................... 12
3.1.2 Dust class "M".............................................................................................................................. 12
3.2 Non-Intended Use............................................................................................................................ 13
3.2.1 Dust class "L"............................................................................................................................... 13
3.2.2 Dust class "M".............................................................................................................................. 13
4Layout and function.............................................................................................................................14
4.1 Main dimensions.............................................................................................................................. 14
4.2 Technical Data RI 311..................................................................................................................... 14
4.3 Technical Data................................................................................................................................. 14
5Main components.................................................................................................................................15
5.1 Components RI 311 W .................................................................................................................... 15
5.2 Function Description Industrial Extractor/deduster.......................................................................... 16
6Initiation.................................................................................................................................................17
6.1 Initial operation of the chip............................................................................................................... 17
7Operation...............................................................................................................................................18
7.1 Operation......................................................................................................................................... 18
7.1.1 Two-stage switch......................................................................................................................... 18
7.2 Suction process ............................................................................................................................... 18
7.3 Filter cleaning .................................................................................................................................. 18
7.3.1 Manual filter cleaning................................................................................................................... 18
7.4 Emptying the collection container.................................................................................................... 19
7.5 Emptying Versions........................................................................................................................... 19
7.5.1 Emptying by forklift (A)................................................................................................................. 19
7.5.2 Emptying by crane (B) ................................................................................................................. 19
7.5.3 Emptying into underfloor conveyor (C)........................................................................................ 19
8Troubleshooting and fault elimination...............................................................................................20
8.1 Safety instructions ........................................................................................................................... 20
8.2 Initial fault elimination measures ..................................................................................................... 21

4/53
9Maintenance/Repair..............................................................................................................................22
9.1 Maintenance regulations.................................................................................................................. 22
9.2 Maintenance intervals table............................................................................................................. 24
9.3 Cleaning........................................................................................................................................... 24
9.4 Disassembly of the suction turbine.................................................................................................. 25
9.4.1 Changing the carbon brushes...................................................................................................... 25
9.5 Installation instructions for Valvo ring core on AC drive units ......................................................... 26
9.6 Disassembly of the bag-type filter ................................................................................................... 27
9.7 Changing the filter cloth for the bag-type filter................................................................................. 28
9.7.1 Work steps for pocket filter change ............................................................................................. 29
9.7.2 Circuit diagram for W1G / W1E / W1E-N / W1E-T, single-motor version.................................. 31
9.7.3 Circuit diagram for W2G / W2G-N / W2G-T / W2E, twin-motor version..................................... 31
9.8 Warnings on the suction device....................................................................................................... 32
9.8.1 Warning sign for devices in class "L"........................................................................................... 32
9.8.2 Warning sign for devices in class "M".......................................................................................... 32
9.8.3 Marking: Vacuum cleaner............................................................................................................ 32
9.8.4 Type sign ..................................................................................................................................... 32
9.9 Measurement of the A-weighted sound pressure level ................................................................... 33
9.10 Wear parts list.................................................................................................................................. 34
10 Decommissioning, storage .................................................................................................................35
11 Disposal.................................................................................................................................................36
12 Spare Parts List ....................................................................................................................................37
12.1 Industrial Extractor Type RI 311...................................................................................................... 37
12.2 Industrial Extractor Type RI 311...................................................................................................... 37
12.3 Exploded Drive unit W2G / W2E (3400228-X-ZB)........................................................................... 38
12.3.1 Parts list Drive unit W2G / W2E (3400228-X-ZB)................................................................... 39
12.4 Exploded fan EKO 86/2.................................................................................................................. 40
12.4.1 Parts list fan EKO 86/2 ............................................................................................................ 40
12.5 Exploded fan EKO 87/3.................................................................................................................. 41
12.5.1 Parts list fan EKO 87/3 ............................................................................................................ 41
12.6 Exploded two-stage switch with cable set W2G / W2E / W3G........................................................ 42
12.7 Exploded two-stage switch with cable set W2G / W2E / W3G........................................................ 42
12.8 Collectoin Container Type RI 311 (2201058).................................................................................. 43
12.8.1 Spare Parts List Collection Container Type RI 311 (2201058) ............................................... 43
12.9 Spare parts list/drawing filter pocket filter 1.75m² cat."L" as or "M" as, (2350201/2350111).......... 44
12.10 Spare parts list/drawing filter pocket filter 1.75m² cat."L" as or "M" as, (2350201/2350111)...... 44
12.11 Spare parts list/drawing hand shaker for pocket filter (2380188).............................................. 45
12.12 Spare parts list/drawing hand shaker for pocket filter (2380188).............................................. 45
12.13 Spacer rake for pocket filter 1.75/3.2/5.2m², (2381000), (2381001), (2381002)......................... 46
12.14 Spacer rake for pocket filter 1.75/3.2/5.2m², (2381000), (2381001), (2381002)......................... 46
12.15 Construction kit hand emptying flap (3240194)........................................................................... 47
12.16 Construction kit hand emptying flap (3240194)........................................................................... 47
12.17 Spare Parts List Suction hose DN 40, all Types (2600484-Z).................................................... 48
12.17.1 Spare Parts List Suction hose DN 40, all Types (2600484-Z)................................................ 48
12.18 Spare Parts List Suction hose DN 50, all Types (2600398-Z).................................................... 49
12.18.1 Spare Parts List Suction hose DN 50, all Types (2600398-Z)................................................ 49
12.18.2 Spare Parts List Suction hose DN 70, all Types...................................................................... 50

5/53
12.18.3 Spare Parts List Suction hose DN 70, all Types...................................................................... 50
12.19 Accessories List........................................................................................................................... 51
13 EEC-Declaration of Conformity...........................................................................................................52
14 Index ......................................................................................................................................................53

Safety Instructions
6/53
Pos: 1.1 /1 Grundlege nde Sicherheitshin weise/Kapitelüb erschrift 1 Angaben zur Sic herheit @ 0\mod_1261 472663260_131 .docx @ 973 @ 1 @ 1

Safety Instructions
7/53
1 Safety Instructions
Pos: 1.2 /1 Grundlege nde Sicherheitshin weise/Kapitelüberschrif t 2B egriffe @ 0\ mod_1261472746 655_131.docx @ 980 @ 2 @ 1
1.1 Terms
Pos: 1.3 /1 Grundlege nde Sicherheitshi nweise/Begriffe-Betri eb @ 0\mod_126 1486420512_131.do cx @1 040 @ 3 @ 1
1.1.1 Operation
includes installation, initiation (placing at disposal for usage), operation (handling, connection,
disconnection, etc.)
Pos: 1.4 /1 Grundlege nde Sicherheitshin weise/Begriffe-Inst andhaltung @ 0\mo d_126148670478 3_131.docx @ 1046 @ 3 @ 1
1.1.2 Maintenance
includes control and attendance (inspections, revisions), maintenance and repair (detection of errors
and their elimination).
Pos: 1.5/ 1 Grundlegende Sicher heitshinweise/Begriff e-qu alifiziertes Personal @ 0\mod_1 261486829253_1 31.docx @ 1052 @ 3@ 1
1.1.3 Qualified Staff
are employees authorised by the person responsible for the security of the installation to carry out
the operations required in each case and who are able to recognise and avoid possible dangers by
reason of their training, experience and instructions as well as their knowledge of relevant norms,
prescriptions, accident-prevention rules and working conditions.
Pos: 1.6 /1 Grundlege nde Sicherheitshin weise/Kapitelüb erschrift 2 Symbole @ 0\mo d_12614731677 32_131.docx @ 987 @ 2 @ 1
1.2 Symbols
Pos: 1.7 /1 Grundlege nde Sicherheitshin weise/Signalwort-F eld"Hi nweis" @ 0\ mod_126140496043 9_131.docx @ 905 @ @ 1
NOTICE
Pos: 1.8/ 1 Grundlegende Sicher heitshinweise/Text zu Hinweiss ymbol @ 0\mod_1261 477345812_131.doc x@ 1014 @ @ 1
Denotes information that does not relate to personal injuries.
This information contains additional directions or general hints.
Pos: 1.9 /1 Grundlege nde Sicherheitshin weise/Signalwort-F eld" Vorsicht" @ 0\mo d_126140489817 1_131.docx @ 899 @ @ 1
CAUTION
Pos: 1.10 /1 Grundleg endeSi cherheitshinw eise/Text zu Vorsichtss ymbol @ 0\mod_ 1261475623349_ 131.docx @ 1000 @ @ 1
Dangerous situation, which could result in minor to moderate injury if it is not avoided.
This information must be regarded strictly to avoid damages to the installation or environment!
Pos: 1.11 /1 Grundleg endeSi cherheitshinw eise/Signalwort-F eld" Warnung" @ 0\ mod_1261404807 286_131.docx @ 893 @ @ 1
WARNING
Pos: 1.12 /1 Grundleg endeSi cherheitshinw eise/Text zu Warns ymbol, Allgemein @ 0\ mod_1261475434 612_131.doc x@ 99 4@ @1
Dangerous situation, which could result in serious injury or death if it is not avoided.
Pos: 1.13 /1 Grundleg endeSi cherheitshinw eise/Signalwort-Fel d" Gefahr" @ 0\mod_126140 4709797_131.doc x@ 887 @ @ 1
DANGER
Pos: 1.14 /1 Grundleg endeSi cherheitshinw eise/Text zu Gefahr ensymbol @ 0\mod _1261477187354_1 31.docx @ 1007 @ @ 1
Dangerous situation, which will definitely result in serious injury or death if it is not avoided.
Pos: 1.15 /1 Grundleg endeSi cherheitshinw eise/Hinweis Bedeutu ng der Betriebsanl eitung @ 0\mod_12 61470697948_131 .docx @ 960 @ @ 1
Significance of the Operating Manual
This Operating Manual is part of the supplied product.
The Operating Manual remains valid throughout the product's lifetime, provided that no
technical changes are made.
If the product is sold, the Operating Manual must be handed over to the next owner or user.
Pos: 1.16 /1 Grundleg endeSi cherheitshinw eise/Hinweis Lese symbol @ 0\mod_12 61405473678_13 1.docx @ 911 @ @ 1
This information must be read before first commissioning.
Pos: 1.17 /1 Grundleg endeSi cherheitshinw eise/Hinweis WARNUNG - Vor Ben utzung der Maschine @ 4\m od_135850004 6626_131.docx @ 37492 @ @ 1
WARNING - Read the instructions before using the machine
Pos: 1.18 /1 Grundleg endeSi cherheitshinw eise/Hinweis CE-Zeic hen @ 0\mod_1 261407630923_131. docx @ 953 @ @ 1
CE marking
The CE marking means "Communautés Européennes". It is the external symbol which states
that a product fulfils the requirements imposed on the manufacturer by the European

Safety Instructions
8/53
Community.
Pos: 1.19 /1 Grundleg endeSi cherheitshinw eise/Hinweis Sicher heitsschuhe @ 0\mo d_126140651 6446_131.docx @ 925 @ @ 1
Only use with safety shoes (acc. to EN ISO 20345)
Pos: 1.20 /1 Grundleg endeSi cherheitshinw eise/Hinweis Arbeits handschuhe @ 0\ mod_1261407294 655_131.docx @ 932 @ @ 1
Only use with work gloves
Pos: 1.21 /1 Grundleg endeSi cherheitshinw eise/Hinweis Ate mschutz @ 4\mod_13 58754071540_13 1.docx @ 37562 @ @ 1
Respiratory protection (EN 149:2001)
Pos: 1.22 /1 Grundleg endeSi cherheitshinw eise/Hinweis Schutz kleidung benutze n@ 4 \mod_135884 9045279_131.doc x@ 37727 @ @ 1
Use protective clothing (acc. to EN 13982-1)
Pos: 1.23 /1 Grundleg endeSi cherheitshinw eise/Hinweis Schutz brille benutzen @ 4\ mod_13588670 32229_131.doc x@ 37 738 @ @ 1
Use protective glasses (acc. to DIN EN 166 1349-BT)
Pos: 1.24 /1 Grundleg endeSi cherheitshinw eise/Hinweis Netzst ecker ziehen @ 0\m od_126140739 2098_131.docx @ 939 @ @ 1
Before starting work remove the plug from the wall socket!
Pos: 1.25 /1 Grundleg endeSi cherheitshinw eise/Hinweis Vor Begin n der Arbeiten freischalt en@ 4\mo d_1362652119939_ 131.docx @ 41545 @ @ 1
Disconnect before starting work
Pos: 1.26 /1 Grundleg endeSi cherheitshinw eise/Hinweis ele ktrische Spannung @ 0 \mod_1261407 628039_131.docx @ 9 46@ @ 1
While operating electrical machines, certain parts of them are inevitable alive dangerously or
under mechanical stress.
Pos: 1.27 /1 Grundleg endeSi cherheitshinw eise/Warnung vor H andverletzungen @ 4 \mod_1361977 699198_131.doc x@ 4 0751 @ @ 1
Hand injury warning sign!
Pos: 1.28 /1 Grundleg endeSi cherheitshin weise/Hinweis Rec yclingsymbol @ 0\ mod_126148983523 9_131.docx @ 1060 @ @ 1
Recycling symbol
This information must be observed in order to preserve the environment!
Pos: 2/ 0 Allgemeines/Seit enumbruch @ 0\ mod_12652720 07940_0.docx @ 2191 @ @ 1

Safety Instructions
9/53
Pos: 3.1 /1 Grundlege nde Sicherheitshin weise/Sicherheitsinf ormationen Wechsels trom-Geräte/Üb erschrift: Allgem eine Sicherheitsinfor mationen @ 0\mod _1269504752362 _131.docx @ 3486 @ 2 @ 1
1.3 General safety information
Pos: 3.2 /1 Grundlege nde Sicherheitshi nweise/Signalwort-F eld" Warnung" @ 0\m od_12614048072 86_131.docx @ 893 @ @ 1
WARNING
Pos: 3.3/ 1 Grundlegende Sicher heitshinweise/Hinweis ele ktrischeS pannung @ 0\mod_1 261407628039_13 1.docx@ 9 46@ @ 1
While operating electrical machines, certain parts of them are inevitable alive dangerously or
under mechanical stress.
Pos: 3.4 /1 Grundlege nde Sicherheitshin weise/Sicherheitsinf ormationen Wechsels trom-Geräte/A ufgrund ihrer funktion ellb edingten elektrisc hen @ 0\mod_12695 04589175_131. docx@ 3480 @ @ 1
Due to their electrical and mechanical functional properties, machines can cause severe injuries
and damage to property. This particularly applies in the event of incorrect use, operation or
maintenance, or in the event of unauthorized interventions!
Pos: 3.5 /1 Grundlege nde Sicherheitshin weise/Sicherheitsinf ormationen Wechsels trom-Geräte/All e elektrischen un d mechanischen Tätig keiten@ 4 \mod_1361 281988815_131.d ocx @ 39784 @ @ 1
All electrical work must be performed by a qualified electrician. All mechanical work must be carried
out according to instructions (see Maintenance / Repair). The device may be operated only by
qualified personnel who have read and understood the operating instructions.
Pos: 3.6 /1 Grundlege nde Sicherheitshin weise/Sicherheitsi nformationen Wec hselstrom-Geräte/V or dem Gebrauch muss di e Bedienperson mit Infor mationen,... @ 4\mo d_136128438 8040_131.docx @ 397 94@ @ 1
The operator must be provided with information, instructions and training on the materials to be
absorbed, including a secure procedure for removal of the absorbed material, before use.
Pos: 3.7 /1 Grundlege nde Sicherheitshin weise/Sicherheitsinf ormationen Wechsels trom-Geräte/All eH inweise und Ang aben auf den Maschinen müssen beachtet werd en @ 0\mod_12 69504980970_131.d ocx @ 3498 @ @ 1
All notes and data on the machines must be observed!
Pos: 3.8 /1 Grundlege nde Sicherheitshin weise/Sicherheitsinf ormationen Wechsels trom-Geräte/Di e einwandfreie und sich ereN utzung dieser Ma schine setzt @ 0\mo d_126950505024 0_131.docx @ 3504 @ @1
Faultless and safe use of this machine includes correct transport and storage, as well as operation
in accordance with regulations and careful maintenance!
Pos: 3.9 /1 Grundlege nde Sicherheitshin weise/Sicherheitsi nformationen Wec hselstrom-Geräte/Di eses Gerät ist nicht dafür b estimmt....... @ 4\mo d_136128495724 2_131.docx @ 39812 @ @ 1
This device is not intended for being used by persons (including) with limited physical, sensory or
mental skills or lack of experience and/or lack of knowledge except if they are supervised by a
person responsible for their safety or were instructed in how to use the device by this person.
Children should be supervised to ensure that they do not play with the device.
Pos: 3.10 /1 Grundlegend eSich erheitshinweise/D erB etrieb des Gerätsi st nur auf bisz u 10°g eneigtem Untergr und mit ausreichender Tragfä higkeit z @ 6\mod_14018 94237321_131.doc x@ 604 27@ @ 1
•Operation of the device is only permitted on underground sloping no more than 10° and with
sufficient load-bearing capacity.
Pos: 3.11 /1 Grundleg endeSi cherheitshinw eise/Signalwort-F eld" Vorsicht" @ 0\m od_12614048981 71_131.docx @ 899 @ @ 1
CAUTION
Pos: 3.12 /1 Grundleg endeSi cherheitshinw eise/Hinweis Sicher heitsschuhe @ 0\mo d_126140651 6446_131.docx @ 925 @ @ 1
Only use with safety shoes (acc. to EN ISO 20345)
Pos: 3.13 /6 Inbetriebnah me/Gliedmaßen hera usziehen @ 6\ mod_1401955740 123_131.docx @ 6048 4@ @ 1
•Do not place any limbs between parts to be joined during assembly of the machine parts. When
moving the parts, pull limbs from tightening spaces in time.
Pos: 3.14 /6 Inbetriebnah me/Spänesaug er/Netzanschlussl eitungen überprüfe n@ 0 \mod_1269 349980705_131.doc x@ 3197 @ @ 1
•Make sure that the power supply cord is not damaged by being run over, crushed, tugged etc..
Stop the industrial vacuum cleaner immediately if necessary!
•The power supply cord must be regularly inspected for signs of damage or ageing!
•Connectors of power supply cords must at least be splash-proof!
Pos: 3.15 /6 Inbetriebnah me/Spänesaug er/Die Inbetriebnah me ohne Filter oder einem besc hädigten Filter ist nicht z ulässig @ 0\mod_ 1269350986591_1 31.docx @ 3227 @ @ 1
•Starting without a filter or with a damaged filter is not allowed
Pos: 3.16 /1 Grundleg endeSi cherheitshinw eise/Sicherheitsi nformationen Wechselstr om-Geräte/D as Sauggerät darf nicht betrieben werd en, wenn an Verschlüsse n@ 0 \mod_126950 5708187_131.doc x@ 3510 @ @ 1
The suction device must not be operated if wear is detected on fasteners or mounting brackets.
Please arrange for a service immediately, or send the industrial vacuum cleaner for repair to:
Pos: 3.17 /1 Grundleg endeSi cherheitshinw eise/Sicherheitsi nformationen Wechselstr om-Geräte/ Service Adressse Ri ngler @ 0\mod_1269 505846364_13 1.docx@ 3516 @ @ 1
Ringler GmbH
Abt. Service
Robert-Bosch-Straße 4-8
73550 Waldstetten
Tel: ++49-7171-94888-23
Pos: 4.1/ 2 Verpackung, Transport, Lager ung/Anlieferung, inn erbetrieblicher Transport, Auspac ken@ 0 \mod_1261397 580765_131.docx @ 840 @ 1 @ 1

Delivery, internal transportation, unpacking
10/53
2 Delivery, internal transportation, unpacking
Pos: 4.2/ 2 Verpackung, Transport, Lager ung/Anlieferung @ 0\m od_1261401230055_ 131.docx @ 853 @ 2@ 1
2.1 Delivery
Unload the scope of delivery on level ground with sufficiently sized industrial trucks.
Pos: 4.3/ 2 Verpackung, Transport, Lager ung/Innerbetrie blicherTr ansport @ 0\mod_1261 401337747_131.d ocx@ 860 @ 2 @ 1
2.2 Internal transport
Transport scope of supply to the site of setup secured against movement or tipping with a sufficiently sized
industrial truck.
Pos: 4.4 /2 Verpac kung,Tr ansport, Lagerung/Ü berschrift: Abmess ungen und Gewicht @ 0 \mod_1269507 946238_131.docx @ 3 536 @ 3 @ 1
2.2.1 Dimensions and weight
Pos: 4.5 /2 Verpac kung,Tr ansport, Lagerung/T abelle: Abmessung enu nd Gewicht RI 311 W 2G/W2E @ 3\mod_1 352902311486_1 31.docx @ 34058 @ @ 1
Packaging
L (mm)
approx. 900
W (mm)
approx. 800
H (mm)
approx. 1800
Weight with
packaging (kg)
approx. 130
Pos: 4.6 /2 Verpac kung,Tr ansport, Lagerung/ Auspacken @ 0\mo d_126140134 0912_131.docx @ 867 @ 2@ 1
2.3 Unpacking
Make sure that no components are left in the packaging.
Scope of delivery: -Suction device
-Technical Manual
Pos: 4.7/ 2 Verpackung, Transport, Lager ung/Verpackungs material @ 0\mod_126140 1408372_131.doc x@ 874 @ 2 @ 1
2.4 Packaging material
The packaging materials must be disposed of in accordance with the valid legal requirements.
Correct disposal of this product (electrical waste) (applicable in the countries of the European Union
and other European countries with a separate collection system)
The identification on the product and on the associated literature states that it must not be disposed of
along with normal domestic waste at the end of its service life. Please dispose of this device
separately from other waste, in order to prevent damage to the environment or to human health
through uncontrolled waste disposal. Please recycle this device, in order to promote sustainable re-
use of material resources. Private users should contact the dealer from whom they purchased the
product or the competent authorities, in order to find out how they can recycle the device in an
environmentally-
friendly manner. Commercial users should contact their supplier. This product must not be disposed of
along with other commercial waste.
Pos: 4.8/ 1 Grundlegende Sicher heitshinweise/Hinweis Rec yclingsymbol @ 0\mod_ 1261489835239_131. docx @ 1060@ @ 1
Recycling symbol
This information must be observed in order to preserve the environment!
Pos: 5.1/ 2 Verpackung, Transp ort,L agerung/Lagerbedi ngungen,Hi nweis zur Lagerung @ 0\mod _1263472277994 _131.docx @ 1350 @ 23@ 1

Delivery, internal transportation, unpacking
11/53
2.5 Storage conditions
2.5.1 Information for storage
Should the industrial exhauster not be operated for a longer period of time, so it has to be stored in
dry, dust and vibrationless rooms.
Temperature T: -10…+40°C
Humidity: max. 85%
Pos: 6.1 /3 Beschreibung d erM aschine, Verwen dung/Gerätebesc hreibung-Übersc hrift @ 0\mod_12 61493001970_131.d ocx @ 1076 @ 1 @ 1

Appliance description
12/53
3 Appliance description
Pos: 6.2 /3 Beschreibung d erM aschine, Ver wendung/Überschrif t: Bestimmungsge mäße Verwendung @ 1\ mod_13351817 14405_131.doc x@ 11500 @ 2 @ 1
3.1 Intended Use
Pos: 6.3 /1 Grundlege nde Sicherheitshin weise/Signalwort-F eld"Hi nweis" @ 0\ mod_126140496043 9_131.docx @ 905 @ @ 1
NOTICE
Pos: 6.4 /3 Beschr eibung der Maschi ne, Verwendung/ Gerät, das in b etriebsbereitem Zusta nd ausgeliefert (N ass für mobile G eräte) @ 4\ mod_136057156 4880_131.docx @ 39432 @ @ 1
•This device, which has been delivered ready for operation, is designed as a wet and dry vacuum
cleaner for commercial and industrial applications e.g. in hotels, schools, hospitals, factories,
shops, offices and rent transactions. It is particularly suitable for vacuuming up chips, granulate, silt
and non-flammable liquids.
Pos: 6.5 /3 Beschreibung der Maschine, Ver wendung/Die Masc hine darf nur betrieben w erden, wenn alle Filter richtig eingesetzt und unbesc hädigt sind @ 4\ mod_1361286 688952_131.docx @ 3 9834@ @ 1
The machine may only be operated when all filters installed correctly and undamaged.
Pos: 6.6/ 3 Beschreibung der Maschi ne, Verwendung/Bei Sch aum- oderF lüssigkeitsaus tritts ofort abschalten! @ 0\mod _1269510877136 _131.docx @ 3568 @ @ 1
•Switch off immediately if foam or liquid escapes!
Pos: 6.7/ 1 Grundlegende Sic herheitshinweise/Sign alwort-Feld" Warnung" @ 0\mod_ 1261404807286_ 131.docx @ 893 @ @ 1
WARNING
Pos: 6.8.1 /3 Beschreibung der Maschi ne, VerwendungÜberschri ft:S taubklasse" L" @ 2\mod_13 45207106541_131. docx@ 20 618 @ 3@ 1
3.1.1 Dust class "L"
Observe warning sign on the device!
Pos: 6.8.2 /3 Beschreibung der Maschi ne, VerwendungGe eignetf ürtr ockene, gesundheitsg efährliche, nicht brennbar e Stäube nach Staubklass e L@ 2\ mod_1344406097 881_131.docx @ 20190 @ @ 1
•The device is suitable for dusts hazardous to health and not flammable with workplace
limit >1mg/m³ according to dust class L (max. permeability <1%) according to DIN EN
60335-2-69 Annex AA:2010.
Pos: 6.9.1 /3 Beschreibung der Maschi ne, Verwendung/Überschrift : Staubklasse "M" @ 2\mod_1 345207107097_131.d ocx@ 2 0627@ 3 @ 1
3.1.2 Dust class "M"
Observe warning sign on the device!
Pos: 6.9.2 /3 Beschr eibung der Mas chine, Ver wendung/Staub klasse „M“ beinh altet die Staubkl asse „L“. @ 3\mod_135047 9497308_1 31.docx @ 31982 @ @ 1
Dust class "M" contains dust class "L".
Pos: 6.9.3 /3 Beschreib ung der Maschine, Ver wendung/Geeign etfür troc kene, gesundh eitsgefährliche, nicht bre nnbare Stäube nach S taubklasse M @ 2\m od_134440633 1161_131.docx @ 201 98@ @ 1
•The device is suitable for dusts hazardous to health and not flammable with workplace limit
≥0.1mg/m³ according to dust class M (max. permeability <0.1%) according to DIN EN
60335-2-69 Annex AA:2010.
Pos: 6.10 /0Allg emeines/Seit enumbruch @ 0\mod_1265 272007940_0.doc x@ 219 1@ @ 1

Appliance description
13/53
Pos: 6.11 /3 Beschreibu ng derM aschine, Ver wendung/Überschrift: Ni cht bestimmungsg emäße Verwendu ng@ 1\mod_133 5941486446_13 1.docx @ 12040 @ 2 @ 1
3.2 Non-Intended Use
Pos: 6.12 /1 Grundleg endeSi cherheitshinw eise/Signalwort-F eld" Hinweis" @ 0\m od_12614049604 39_131.docx @ 905 @ @ 1
NOTICE
Pos: 6.13 /3 Beschreibung derM aschine, V erwendung/Pers onen- und Sachschäd en, nicht bestim mungsgemäße Ver wendung @ 4\mod_1 361974611424_131. docx @ 40732 @ @ 1
For all personal injuries and material damages, which are caused by a not -asdirected-
use, the operator and not the manufacturer of the machine is
responsible for !
Pos: 6.14 /3 Beschreibung derM aschine, V erwendung/Eins atzi mFr eien nicht gestattet! @ 6\mod_14 02927556366_131 .docx @ 61608 @ @ 1
•May not be used outdoors!
Pos: 6.15 /1 Grundleg endeSi cherheitshinw eise/Signalwort-F eld" Warnung" @ 0\ mod_1261404807 286_131.docx @ 893 @ @ 1
WARNING
Pos: 6.16 /3 Beschreibung derM aschine, V erwendung/Nic htgeeig net für brennbare Stä ube @ 4\mod_136 1865721690_131. docx @ 40592 @ @ 1
•This device is not suitable for taking up and extracting combustible dusts.
Pos: 6.17 /3 Beschreibung derM aschine, V erwendung/Nic htgeeig net für brennbare Flüssi gkeiten @ 4\mo d_136057351916 6_131.docx @ 39443 @ @ 1
•This device is not suitable for taking up and extracting flammable liquids (flammable, highly
flammable, highly flammable hazardous substances according to Directive 67/548/EEC)
(Flash Point under 55°C) as well as mixtures of combustible dusts with flammable liquids.
Pos: 6.18 /3 Beschreibu ng derM aschine, Ver wendung/Nicht in e xplosionsgefährdeten R äumen zugelassen! @ 0\mod_126 9511242762_131.d ocx @ 3587 @ @ 1
•The vacuum cleaner is not approved for operation in potentially explosive areas!
Pos: 6.19 /1 Grundleg endeSi cherheitshin weise/Signalwort-F eld" Gefahr" @ 0\mo d_126140470979 7_131.docx @ 887 @ @ 1
DANGER
Pos: 6.20 /3 Beschreibung derM aschine, V erwendung/Bei nicht bestimmungsg emäßer Verwendu ngb esteht Explosions- und Brandgefa hr@ 1\mod_133 5941594717_1 31.docx @ 12048 @ @ 1
•With improper use may cause explosion and fire!
Pos: 6.21.1 /3 Beschreibung der Maschin e,V erwendungÜbersc hrift: Staubklasse "L" @ 2\mod_1 345207106541_131.d ocx@ 2 0618@ 3 @ 1
3.2.1 Dust class "L"
Observe warning sign on the device!
Pos: 6.21.2 /3 Beschrei bung derM aschine, Ver wendungNicht geeig netf ür Staubklasse M und H @ 2\ mod_134520 5305674_131.d ocx @ 20609 @ @ 1
•The device is not suitable for dust class Mand H.
Pos: 6.21.3 /3 Beschrei bung der Maschine, V erwendung/Nicht geeig net für krebserrege nde Gefahrstoffe ge mäßG efStoffV, TRGS @ 8 \mod_142410011 5484_131.doc x@ 78 470 @ @ 1
•The device is not suitable for carcinogenic hazardous substances purs. to GefStoffV §10,
TRGS 905 or TRGS 906.
Pos: 6.21.4 /3 Beschrei bung derM aschine, Ver wendungNicht geeig netf ür Asbest @ 2\ mod_134484222280 5_131.docx @ 20352 @ @ 1
•The device is not suitable for asbestos pursuant to TRGS 519.
Pos: 6.22.1 /3 Beschreibung der Maschin e,V erwendungÜbersc hrift: Staubklasse "M" @ 2\mod_ 1345207107097_13 1.docx@ 2 0627 @ 3@ 1
3.2.2 Dust class "M"
Observe warning sign on the device!
Pos: 6.22.2 /3 Beschreibung der Masc hine, VerwendungNi chtg eeignet für Staubklass eH @ 2\ mod_1344840346272 _131.docx @ 20343 @ @ 1
•The device is not suitable for dust class H.
Pos: 6.22.3 /3 Beschrei bung derM aschine, Ver wendung/Nicht geeign et für krebserrege nde Gefahrstoffe ge mäßG efStoffV, TRGS @ 8 \mod_142410011 5484_131.doc x@ 78 470 @ @ 1
•The device is not suitable for carcinogenic hazardous substances purs. to GefStoffV §10,
TRGS 905 or TRGS 906.
Pos: 6.22.4 /3 Beschrei bung derM aschine, Ver wendungNicht geeig netf ür Asbest @ 2\ mod_134484222280 5_131.docx @ 20352 @ @ 1
•The device is not suitable for asbestos pursuant to TRGS 519.
Pos: 7.1 /4 Aufbau und Funktio n, Technische Date n/Aufbau und Fun ktion@ 0\mod_ 1263203845612_ 131.docx @ 1120 @ 1 @ 1

Layout and function
14/53
4 Layout and function
Pos: 7.2 /4 Aufbau und Funktio n, Technische Date n/Überschrift: Haupt maße @ 1\mod _1288959443995_1 31.docx @ 6980 @ 2 @ 1
4.1 Main dimensions
Pos: 7.3 /4 Aufbau und Funktio n, Technische Date n/Ringler Industries auger und fahrbare Entst auber werden in betrie bsbereitem Zust and ausgeliefert. @ 1\ mod_12889595241 59_131.docx @ 698 7 @ @ 1
Ringler industrial vacuum cleaners and mobile dust collectors are delivered in operational condition
Pos: 7.4 /4 Aufbau und Funktio n, Technische Date n/RI/Zeichnung RI 31 1-W2G/W2E Hau ptmaße (9900124) @ 3\mod_13529 03256774_0.doc x@ 3 4132 @ @ 1
Pos: 7.5 /4 Aufbau und Funktio n, Technische Da ten/RI/neue Technisc he Daten/Technis cheD aten RI 311 @ 9\mod_ 1429788823010 _131.docx @ 92291 @ 2 @ 1
4.2 Technical Data RI 311
Motor
W2E
W2G
Weight
89kg
88kg
Sound pressure level LpA
according IEC 60704-2-1
72dB(A)
70dB(A)
Uncertainty KpA
2dB(A)
2dB(A)
Protection class
I
Ambient temperature
-15°C to +40°C
Intake temperature medium
max. +40°C
Installation altitude
max. 1000m over NN
Pos: 7.6 /4 Aufbau und Funktio n, Technische Date n/RI/neue Technisc heD aten/Technisch eD aten W2E/W2G @ 8\mod_14241 80404385_131. docx@ 78671 @ 2 @ 1
4.3 Technical Data
W2E
W2G
Output
2,6kW
2,0kW
Frequency
50Hz
50Hz
Hedging
16A
16A
Voltage/
Power intake
220-240V / 11,8A
220-240V / 9,0A
Pressure
23kPa/230mbar
22kPa/220mbar
Air displacement
volume
430m³/h
360m³/h
Protection type
IPX 4
IPX 4
Pos: 8.1/ 5 Anlagenbeschrei bung, Bedienungs- und Anz eigeelemente, Betriebs arten/Hauptkompo nenten, Kapitelüberschrift @ 0\ mod_126338734 9738_131.docx @ 1276 @ 1 @ 1

Main components
15/53
5 Main components
Pos: 8.2 /5 Anlagenbesc hreibung, Bedien ungs- und Anzeigeele mente, Betriebsart en/RI/Überschrift: Best andteile RI 311 W @ 3\m od_13529038824 11_131.doc x@ 34198 @ 2 @ 1
5.1 Components RI 311 W
Pos: 8.3 /5 Anlagenbesc hreibung, Bedienu ngs- und Anzeigeele mente, Betriebsart en/RI/Zeichnung Ha uptbestandteile RI 31 1 W2G/W2E @ 3\mo d_1352903814593_ 0.docx @ 34165 @ @ 1
Pos: 8.4 /5 Anlagenbesc hreibung, Bedienu ngs- und Anzeigeele mente, Betriebsart en/RI/Tabelle zu Zeichn ungH auptkomp onentenR I 311 W2G/W2 E/W3G @ 3\mod_13 52903881721_13 1.docx @ 34187 @ @ 1
A
Collection container
B
Drive part
C
Crane lugs
D
Rotary handle
E
Sliding handle
F
Shaker device
G
Chassis
H
Caster stop
I
Emptying lever
J
Suction socket
Pos: 8.5 /5 Anlagenbesc hreibung, Bedienu ngs- und Anzeigeele mente, Betriebsart en/RI/Funktions Besc hreibung Industriest aubsauger @ 2\ mod_134441572504 5_131.docx @ 2024 0 @2 @ 1

Main components
16/53
5.2 Function Description Industrial Extractor/deduster
The industrial extractor/deduster is a mobile device. A turbine in the drive unit generates a vacuum.
The raw air is sucked in through the nozzle and the suction hose. Heavy particles drop directly down
at the input into the collection container because of gravity. Smaller particles and dust are separated
at the surface of the filter material when passing through the area filter. The pure air that was cleaned
in this manner is blown back into the working room through the suction turbines and the muffler
exhaust hose.
The cooling air for the suction turbines is sucked in at the aid inlets at the hood and flows along the
motor. This heated air then escapes again into the working room at various air gaps at the hood.
Pos: 9.1/ 6I nbetriebnahme/Inb etriebnahme, Kapitelü berschrift @ 0\mod_126348 1987997_131.doc x@ 136 2@ 1 @ 1

Initiation
17/53
6 Initiation
Pos: 9.2 /1 Grundlege nde Sicherheitshin weise/Hinweis Sicherh eitsschuhe @ 0\ mod_1261406516 446_131.docx @ 925 @ @ 1
Only use with safety shoes (acc. to EN ISO 20345)
Pos: 9.3/ 6I nbetriebnahme/S pänesauger/Überschrif t: Erstinbetriebnah me@ 0\m od_126934923363 1_131.docx @ 3176 @ 2 @ 1
6.1 Initial operation of the chip
Pos: 9.4 /1 Grundlege nde Sicherheitshin weise/Signalwort-F eld" Vorsicht" @ 0\mo d_126140489817 1_131.docx @ 899 @ @ 1
CAUTION
Pos: 9.5 /6 Inbetriebnahm e/Verantwortung B etreiber Installation Sc hutzeinrichtung Tre nnung Anschlussph asen @ 6\mod_ 1401953418877_13 1.docx @ 60458 @ @ 1
•The operator shall be responsible for installation of protective equipment that will recognise a short-
circuit in case of fault and isolate all connection phases.
Pos: 9.6 /6I nbetriebnahm e/Spänesauger/N etzanschlussleit ungen überprüfen @ 0\mod_1269 349980705_13 1.docx@ 3197 @ @ 1
•Make sure that the power supply cord is not damaged by being run over, crushed, tugged etc..
Stop the industrial vacuum cleaner immediately if necessary!
•The power supply cord must be regularly inspected for signs of damage or ageing!
•Connectors of power supply cords must at least be splash-proof!
Pos: 9.7 /6I nbetriebnahm e/Spänesauger/Di e Betriebsbe dingungen stimmen mit d enSc hildangaben @ 0\ mod_1269350197 077_131.docx @ 3203 @ @ 1
•The operating conditions must match the data on the plate and the supplied documentation, if
applicable.
Pos: 9.8/ 6I nbetriebnahme/S pänesauger/Die In betriebnahme ohne Filter oder ein em beschädigten Filter ist nicht zulässig @ 0\m od_126935098 6591_131.docx @ 3227 @ @ 1
•Starting without a filter or with a damaged filter is not allowed
Pos: 9.9/ 6I nbetriebnahme/S pänesauger/Der Indus triesauger ist ordnungsge mäß montiert, @ 0\mod_12 69351204934_13 1.docx@ 3239 @ @ 1
•The industrial vacuum cleaner must be correctly installed, with all necessary lines and tubes
connected.
Pos: 9.10 /6 Inbetriebnah me/Spänesaug er/Die Kühlluftführ ungist nic ht beeinträc htigt@ 0 \mod_1269351 426579_131.doc x@ 3245 @ @ 1
•The cooling air duct must be fully functional, the cooling effect must also not be impaired by soiling
of the cooling surfaces.
Pos: 9.11 /6 Inbetriebnah me/Spänesaug er/Gewünschte Abs augdüse in Steckkonus am Handgriff d es Absaugschlauches ei nsetzen. @ 0\ mod_1269351562 967_131.docx @ 3251 @ @ 1
•Insert desired suction nozzle into the plug-in cone on the handle of the suction tube.
Pos: 9.12 /6 Inbetriebnah me/Spänesaug er/Zentrischen Sitz der A ntriebseinheit auf B ehälter kontrollieren. @ 0\mod_12 69351676324_131.d ocx @ 3263 @ @ 1
•Check that the drive unit is centrally located on the tank.
Pos: 9.13 /6 Inbetriebnah me/Spänesaug er/Antriebseinheit d urch 180-Grad Dreh ung der Klemmgriffe verrieg eln. @ 0\mod_1 269351748189_131. docx @ 3269 @ @ 1
Lock the drive unit by turning the clamping levers 180 degrees.
Pos: 9.14 /6 Inbetriebnah me/Spänesaug er/Die Entleerklapp e muss korrekt verschloss ens ein. @ 1\mod_1 336458953919_1 31.docx @ 12520 @ @ 1
•The emptying flap must be closed correctly.
Pos: 9.15 /6 Inbetriebnah me/Spänesaug er/Zweimotorige Ausf ührungen dürfen nur betri eben werden @ 0\ mod_1269350426 634_131.doc x@ 32 15@ @ 1
Twin-motor versions may only be operated with both suction turbines are switched on.
Pos: 9.16 /6 Inbetriebnah me/Spänesaug er/BeiZ ubehörteilen a uffe sten Sitz achten @ 3\ mod_135331808 1949_131.docx @ 3 4522@ @ 1
Look for in accessories (jet) for tightness
Pos: 9.17 /6 Inbetriebnah me/Spänesaug er/Netzstecker einstec ken @ 3\mod_ 1353317852290_13 1.docx @ 34512 @ @ 1
Put in power plug
Pos: 9.18 /6 Inbetriebnah me/Spänesaug er/Industriesaug er mit dem an der Antriebseinh eit befindlichen Ein/Au sschalter in Betrieb se tzen @ 0\mod_126 9351880561_13 1.docx@ 3281 @ @ 1
Start up the industrial vacuum cleaner with the on/off switch located on the drive unit.
Pos: 10.1 /7 Betrieb, Be dienung/Betrieb, Bedie nung, Kapitelübersc hrift @ 0\mod_12 63539997200_13 1.docx @ 1414 @ 1 @ 1

Operation
18/53
7 Operation
Pos: 10.2 /7 Betrieb, Be dienung/Betrieb, Übersc hrift 1.1 @ 0\mod_ 1263544263702_ 131.docx @ 1432 @ 2 @ 1
7.1 Operation
Pos: 10.3 /1 Grundleg endeSi cherheitshinw eise/Signalwort-F eld" Vorsicht" @ 0\m od_12614048981 71_131.docx @ 899 @ @ 1
CAUTION
Pos: 10.4 /7 Betrieb, Be dienungGerät nur mit akti vierten Feststell bremsen aktivieren @ 6\m od_140197169 4391_131.docx @ 605 11@ @ 1
•Only operate the device with the parking brakes activated.
•Only move the device at walking speed. Act with care. In case of sloping paths, bring in a second
person to help.
Pos: 10.5 /6 Inbetriebnah me/Spänesaug er/Zweimotorige Ausf ührungen dürfen nur betri eben werden @ 0\ mod_1269350426 634_131.doc x@ 32 15@ @ 1
Twin-motor versions may only be operated with both suction turbines are switched on.
Pos: 10.6 /7 Betrieb, Be dienung/Spänesa uger/Zwei-Stufen Sc halter Wechselstrom ( W2G/W2E) @ 0\ mod_126935306727 1_131.docx @ 3299 @ 3@ 1
7.1.1 Two-stage switch
0= Motors off 1= Motor 1 on 2= Motors 1 and 2 on
Pos: 10.7.1 /7 Betrieb, Be dienung/Spänesaug er/Überschrift A bsaugvorgang @ 0\mod_12693 55638357_131.doc x@ 3 324 @ 2 @ 1
7.2 Suction process
Pos: 10.7.2 /1 Grundleg ende Sicherheitshin weise/Signalwort- Feld "Hinweis" @ 0\ mod_1261404960 439_131.doc x@ 90 5 @ @ 1
NOTICE
Pos: 10.7.3 /7 Betrieb, Be dienung/Spänesaug er/Beim Saugen vo nFl üssigkeiten nur h alb eintauchen, um ge nügend Luft mitzuförder n@ 0 \mod_1269355 003866_131.doc x@ 3312 @ @ 1
•When vacuuming up liquids only immerse halfway, so that sufficient air is absorbed
Pos: 10.7.4 /6 Inbetri ebnahme/Spänesa uger/Gewünschte A bsaugdüse in Stec kkonus amH andgriff des Ab saugschlauches ei nsetzen. @ 0\mod _1269351562967_1 31.docx @ 3251 @ @ 1
•Insert desired suction nozzle into the plug-in cone on the handle of the suction tube.
Pos: 10.7.5 /7 Betrieb, Be dienung/Spänesaug er/Skizze Saugdü se falsch-richtig @ 0\ mod_126935611 3020_0.doc x@ 3336 @ @ 1
Pos: 10.7.6 /7 Betrieb, Be dienung/Spänesaug er/Düse nicht mit der g anzenFl äche aufsetzen @ 0\ mod_1269 355889461_131.d ocx @ 3330 @ @ 1
Do not immerse the entire area of the nozzle!
Hold the nozzle diagonally to the suction surface,
so that both air and liquid are absorbed
Pos: 10.8.1 /7 Betrieb, Be dienung/Überschrift Fi lterabreinigung @ 2 \mod_1337326 637205_131.doc x@ 13380 @ 2 @ 1
7.3 Filter cleaning
Pos: 10.8.2 /7 Betrieb, Be dienung/Übersc hrift Manuelle Filterabr einigung @ 2\mod _1337326667859 _131.docx @ 13387 @ 3 @ 1
7.3.1 Manual filter cleaning
Pos: 10.8.3 /1 Grundlegend eSich erheitshinweise/Sig nalwort-Feld "Vorsicht" @ 0\m od_1261404898171 _131.docx @ 899@ @ 1
CAUTION
Pos: 10.8.4 /7 Betrieb, Be dienung/Nach Absc halten der Saugturbin eF einstaubtasche nfilterd urch vor- und z urückbewegen des He bels@ 2\mod_133 7326762584_131. docx @ 13401 @ @ 1
•After deactivation of the extraction turbine, clean the fine dust pocket filter
by manual filter cleaning by shaking movement of the hand shaker grip.
Pos: 10.8.5 /7 Betrieb, Be dienung/Anlage im Da uerbetrieb eingesetzt muss ein Abreinigu ngszeitpunkt festegel egt werden @ 2\ mod_133732736 8592_131.docx @ 134 08@ @ 1
•If the plant is operating permanently a certain point of time for cleaning
has to be fixed by the operating staff and the fine dust pocket filter has to
be cleaned.
Pos: 10.8.6 /7 Betrieb, Be dienung/Nachla ufzeit der Turbine, darf der Rüttel vorgang erst ca. 1-2 min nach dem Absch alten @ 2\mod_133 7327717412_1 31.docx @ 13415 @ @ 1

Operation
19/53
•Because of the slowing-down time of the turbine, the vibration process must only be started 1-2min
after turn off.
Pos: 10.8.7 /7 Betrieb, Be dienung/Warten Sie ca . 30sec., bevor Sie das Gerät wieder in Gang s etzen @ 2\mod_1337 328413779_131.d ocx @ 13436 @ @ 1
•Wait approx. 30sec. for the dust to settle, before restarting the device.
Pos: 10.9.1 /7 Betrieb, Be dienung/Überschrift :E ntleeren des Sam melbehälters Typ RI 31 1@ 3 \mod_1352907 055541_131.doc x@ 34229 @ 2 @ 1
7.4 Emptying the collection container
Pos: 10.9.2 /1 Grundlegend eSich erheitshinweise/Sig nalwort-Feld "Vorsicht" @ 0\m od_1261404898171 _131.docx @ 899@ @ 1
CAUTION
Pos: 10.9.3 /1 Grundleg ende Sicherheitshin weise/Hinweis Netzst ecker ziehen @ 0\ mod_12614073920 98_131.doc x@ 939 @ @ 1
Before starting work remove the plug from the wall socket!
Pos: 10.9.4 /7 Betrieb, Be dienung/Vor dem Entl eeren des Sammelbeh älters, Motor aussch alten und Netzstecker zi ehen! @ 3\mod_13 52907478503_131 .docx @ 34252 @ @ 1
Before emptying the collection container, deactivate the motor and pull the mains plug!
Pos: 10.9.5 /7 Betrieb, Be dienung/Spänesaug er/Bei der Entleer ung desRi ngler-Indu striesaugers mit de m Kran oder dem Gabelstapl erist d er Aufenth @ 3\mod _1352975855122 _131.docx @ 34374 @ @ 1
Never stay in the working area when emptying the Ringler industrial extractor with a crane or
forklift!
Pos: 10.9.6 /7 Betrieb, Be dienung/Überschrift :E ntleervariante n@ 3 \mod_135290 7686385_131.doc x@ 34262 @ 2 @ 1
7.5 Emptying Versions
Pos: 10.9.7 /7 Betrieb, Be dienung/Skizze Stapler entleerung, Krane ntleerung, Unterflure ntleerung Typ RI 311 W2 G/W2E @ 3\m od_1352972044581 _0.docx @ 34333 @ @ 1
Pos: 10.9.8 /7 Betrieb, Be dienung/Entleer varianten mittels Hubst apler, Kran oder Unterflurf örderer @ 3\mo d_1352907771036_ 131.docx @ 34272 @ 3 33@ 1
7.5.1 Emptying by forklift (A)
Lift the extractor RI 311 with a forklift via the chassis.
Lift collecting container, open manual emptying flap above container
7.5.2 Emptying by crane (B)
Attach snap hook of crane bracket (accessories) in crane lugs at the collection container.
Lift collecting container, open manual emptying flap above container
7.5.3 Emptying into underfloor conveyor (C)
Open manual emptying flap over chute
Pos: 11.1 /8 Störungss uche und Störungsb eseitigung/Störungssu che und Störungsbes eitigung @ 0\mo d_1263801277821 _131.docx @ 1480 @ 1 @ 1

Troubleshooting and fault elimination
20/53
8 Troubleshooting and fault elimination
Pos: 11.2 /1 Grundleg endeSi cherheitshinw eise/Sicherheitsi nformationen Wechselstr om-Geräte/Ü berschrift: Sicherh eitshinweise @ 0\ mod_1269594836 071_131.docx @ 3742 @ 2 @ 1
8.1 Safety instructions
Pos: 11.3 /1 Grundleg endeSi cherheitshinw eise/Signalwort-F eld" Warnung" @ 0\ mod_1261404807 286_131.docx @ 893 @ @ 1
WARNING
Pos: 11.4 /1 Grundleg endeSi cherheitshin weise/Hinweis Netzst ecker ziehen @ 0\m od_126140739 2098_131.docx @ 939 @ @ 1
Before starting work remove the plug from the wall socket!
Pos: 11.5 /1 Grundleg endeSi cherheitshinw eise/Hinweis Sicher heitsschuhe @ 0\mo d_126140651 6446_131.docx @ 925 @ @ 1
Only use with safety shoes (acc. to EN ISO 20345)
Pos: 11.6 /8 Störungssuc he und Störungsb eseitigung/Bevor Arbeit enzur Störungs beseitigung begonne n werden müssen die F eststellbremsen a mFa hrgestell ak @ 8\mod _1424241177667 _131.docx @ 78746 @ @ 1
Before work for troubleshooting is started, the parking brakes at the undercarriage must be activated.
Pos: 11.7 /8 Störungssuc he und Störungsb eseitigung/Sollten sch ädliche Substanze n entweichen, Maschin eauss chalten, R auml üften bzw. verlassen .@ 2 \mod_1348551 330162_131.doc x@ 3 0232 @ @ 1
If harmful substances escape due to a defect (eg filter defect), the machinery must be switched off
immediately and the room has to be aired or leave!
Pos: 11.8 /1 Grundleg endeSi cherheitshin weise/Sicherheitsi nformationen Wechs elstrom-Geräte/ vor Beginn jeder Arbeit. ...fr ei zuschalten @ 0\mo d_12695945599 93_131.docx @ 373 0@ @ 1
•Before starting any work on the industrial vacuum cleaner, but particularly before opening covers of
live or moving parts, the industrial vacuum cleaner or system must be correctly disconnected from
the mains and the drive unit must have stopped
Pos: 11.9 /1 Grundleg endeSi cherheitshinw eise/Sicherheitsi nformationen Wechselstr om-Geräte/Di e nachstehend gen annten Maßnahme n dürfen erst dann zurückg enommen werden @ 0\mod_12695 94747884_131. docx@ 3736 @ @ 1
•The measures specified below may only be withdrawn when the industrial vacuum cleaner is
completely reassembled and the maintenance is concluded.
Pos: 11.10 /1 Grundlege nde Sicherheitshin weise/Sicherheitsin formationen Wechs elstrom-Ger äte/Die üblichen Sicherh eitsregeln laute nhierb eiz .B. nach VDE 0105 @ 0\ mod_12695949 14059_131.doc x@ 3748 @ @ 1
•The usual safety regulations are, for example, in accordance with VDE 0105:
–Disconnect from mains
–Provide a safeguard to prevent unintentional restarting
–Check that the equipment is not live
–Cover or shield adjacent live parts.
Pos: 11.11 /0 Allgem eines/Seitenumbruch @ 0\mod_126 5272007940_0. docx@ 2191 @ @ 1