Kaba Group Saflok InSync L Parts list manual

InSync®L Lock Usage Instructions Pg. 1 of 2
InSync®L
Lock Usage Instructions
Unit Configuration
Unlocking your door from the outside
roiretxEroiretxE Exterior
31 2
1. Fully insert your RFID key into the
lock port.
2. Wait until the GREEN light flashes
once.
3. Rotate the lever downward to retract
the latch bolt to open the door.
Locking and unlocking the door from the inside
To lock the door from the
inside, rotate the thumb turn to
the horizontal position.
Locked
Interior
Unlocked
Interior
Interior Views
Locked
Unlocked Thumb-Turn Position
Unlocked
Locked
To unlock the door from the
inside, rotate the lever
downward or return the thumb
turn to the vertical position.
Notes:
• If the lever is used when the door is locked, the thumb turn will always return to the vertical position
and the door will remain unlocked. To lock the door from the outside, insert the key and wait for the
RED light to flash once.
• If the door is locked from the inside and entry if made from the outside, the thumb turn will remain in
the horizontal position and the door will re-lock in approximately five seconds.
All information contained herein, including but not limited to product pricing and other intellectual property, is confidential and
intended for the sole use of the addressee(s) so named. Any misuse of this confidential information contained herein may result in
legal action by Computerized Security Systems dba SAFLOK and its parent company.
© SAFLOK™ WL 5/7/2008

InSync®L Lock Usage Instructions Pg. 2 of 2
Locking your door from the outside
Exterior Exterior
1 2
1. Pull the door shut and insert the key into the lock port.
2. Wait until the RED light flashes once.
Suite Configuration
InSync L locks for suite configuration have no thumb turn. Suite locks cannot be left unlocked.
Ext er ior Ext er ior Interior
1 2
1. Fully insert your RFID key into the
lock port.
2. Wait until the GREEN light flashes
once.
3. Rotate the lever downward to
retract the latch bolt and the dead
bolt to open the door.
Frequently Asked Questions
1. How does my new InSync L lock work?
Your InSync L lock communicates unique and encrypted access
codes to the lock via radio frequency (RF) signals.
2. What do I need to operate my lock?
To operate your lock, you will need an RFID key.
3. What kind of information is contained in my RFID key that enables it to operate the lock?
The barrel of each RFID key is encoded with a unique, encrypted access code.
4. What does it mean if the GREEN light flashes once and this is followed by six RED flashes?
This sequence signals that the battery is low. Please report this to management to avoid a potential
lockout.
Note: Please report any other light signals to management to avoid a potential lockout.
© SAFLOK™ WL 5/7/2008