Kaffe KF2010 Quick guide
Electric Coffee Grinder
Model: KF2010, KF2020, KF2030
Operating and Safety Instructions
- FOR HOUSEHOLD USE ONLY –
READ ALL INSTRUCTIONS BEFORE USE
IMPORTANT SAFETY INSTRUCTIONS
Definitions
Whenever used, the following identify safety and property
damage messages and designate a level of hazard seriousness.
- This is the safety alert symbol. It alerts you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER – Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury. Usage of this signal word is
limited to the most extreme situations.
WARNING – Indicates a potentially hazardous situation, which, if not
avoided, could result in death or serious injury.
CAUTION – Indicates a potentially hazardous situation, which, if not
avoided, may result in moderate/serious injury.
NOTICE – Addresses practices not related to personal injury, such as
product and/or property damage.
When using electrical appliances, always follow basic safety precautions,
including the following:
WARNING - To reduce the risk of fire, electric shock,
or serious personal injury:
●To protect against risk of electrical shock DO NOT put the unit in water
or any other liquid nor use the unit near any water or liquid.
●NOT to be used by children.
●Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning.
●Avoid contacting moving parts.
●DO NOT operate any appliance with a damaged cord or plug or after the
appliance malfunctions or is dropped or damaged in any manner. Return
the appliance to the nearest authorized service facility for examination,
repair or electrical or mechanical adjustment.
●DO NOT use any attachments as it may cause fire, electric shock or
injury.
2
●Check inside bowl for presence of foreign objects before each use.
SAVE THESE INSTRUCTIONS
CAUTION - To reduce the risk of personal injury and/or
product/property damage:
●This product is intended solely for indoor, non-commercial,
non-industrial use in grinding coffee beans. Do not use the product
outdoors or for any other purpose.
●Do not allow the Power Cord to hang over the edge of a table or
counter, where it may be tripped over or pulled.
●Always place the product on a flat, level, stable surface before use.
WARNING: This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, the plug will fit in a polarized
outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician.
Do not modify the plug in any way.
3
PARTS
Before First Use
Clean the Cover, Bowl, and Blade as described in the “Care and
Maintenance” section.
To Use
1. Make sure the Coffee Grinder is unplugged.
2. Remove the Cover by lifting it up. Add up to 2.5 oz. of coffee beans to
the Bowl.
3. Close the Cover and plug the Power Cord into a standard 230-volt AC
electrical outlet.
4. To operate, press and hold the ON/OFF Button. Release the ON/OFF
Button to stop grinding.
NOTICE: Do not operate for more than 30 seconds at a time. After 30
seconds of continuous operation, allow the unit to rest for 30 seconds.
NOTE: The Coffee Grinder will not operate unless the Cover is in place.
4
5. Unplug the Power Cord from the electrical outlet and remove the Cover.
Remove the coffee grounds from the Coffee Grinder.
CARE AND MAINTENANCE
WARNING:
●Always make sure the Coffee Grinder is unplugged from the electrical
outlet before cleaning it.
●This product was permanently lubricated at the factory before shipping
and will not require further lubrication for the life of the product.
Additional lubrication of motor parts could increase the risk of a fire
hazard.
NOTICE: Do not use harsh or abrasive cleaners or pads (metal scouring pads)
on the Coffee Grinder.
●Hand wash the Cover with soapy water or place it on the upper rack of a
dishwasher for cleaning.
●Clean the Bowl and Blade with a clean, wet, soapy sponge. Rinse the
Bowl and Blade, but do not immerse the Base in water. Gently pat the
Bowl and Base dry using a clean, dry cloth.
CAUTION: Clean the Bowl and Blade carefully to avoid personal injury.
●Wipe the Base with a damp cloth to clean.
●Replace the Cover once all parts are dry.
●Store in a cool, dry place.
ELECTRICAL SPECIFICATIONS
Voltage
Frequency
Wattage
120VAC
60Hz
150W
5
This manual suits for next models
2
Table of contents
