Kaide KK-848 User manual

USER’S MANUAL 848
DIAGRAM & FUNCTION INDICATION
1. Display screen
2. AM Indicator
3. Tuning Indicator
4. FM Indicator
5. Tuning Switch
6. AM button
7. FM button
8. Power switch
9. Min adjustment button
10. AL. Set button
11. AL. ON/OFF button
12. Night light
13. Band selector
14. Time Set button
15. Hour adjustment button
16. Supporting rack
17. Antenna
18. Volume control
19. Earphone jack
20. D.C jack
21. Hand strap
22. Battery compartment
LCD EXPLANATION

1. AM frequency indication
2. FM and SW unit indication
3. Alarm indicator
4. Alarm time set indication
5. P.M. display
6. AM unit indication
7. Time or Frequency display
INSTALL BATTERY
1. The radio uses two AA1.5V batteries, please put the new batteries in the battery slot according to
the polarity.
2. If the sound is distorted or volume is faint, please change the batteries.
Attention :
1. Do not mix new and old batteries together.
2. In order to prevent the leakage of the electrolysis liquid or danger of explosion, do not charge, heat
or resolve the batteries.
3. If you do not use the radio for a long time, please take out the batteries.
USE EXTERNAL POWER
Please use output DC 3V 300mA regulating external direct current power, check the polarity.
BASIC OPERATIONS
1. When you move the Power switch (8) to the position of ON, the radio begins to work. When you
move the Power switch (8) to the position of OFF , the radio is turned off, the time is displayed the
display screen.
2. Turn the Volume control (18) to adjust to your desired volume.

3. Press FM button (7) to receive the FM band program, the indicator (4) will light up.
4. Press AM button (6) to receive AM band program. Move the Band Switch (13) to select MW (left
most ), SW(1-8) station program.
5. After the band is selected , turn the Tuner 5) and watch the station frequency on LCD. Search your
desired station program.
6. The Tuning Indicator (3) ill light up , when you receive the correct station and the station signal is
sufficiently strong.
7. If an earphone is plug-in (19), the speaker sound will be off and signal will be sent to earphone.
8. Use the support rack when necessary.
9. Press button (12) for night light.
TIME SET
1. After installing batteries, under the clock mode, the “12:00” appears on LCD.
2. Keep the Time set button (14) pressed, meanwhile press the Hour adjustment button (15) to adjust
hour, (9) to adjust minute.
3. The time will be shown when the radio is off.
4. The 12 hours system is used in the radio. The PM on the display indicates afternoon time.
ALARM SET
1. Under the radio-off mode , keep and AL. SET button (10) pressed. Press the Hour adjustment
button (15) to adjust hour and press the Minute adjustment button (9) to adjust the minute.
2. You can check the pre-set alarm time by pressing the AL. SET button under the radio mode.
WAKE-ON-RADIO
1. Turn off the radio and keep the radio in the clock mode.
2. Press the AL on/off switch button (11) once , the symbol of a clock displays on the screen, the
wake-on-radio function begins to work. When the turn on time reaches, the radio will
automatically turn on. The last band frequency will display on the screen.
3. When you use the wake-on-radio function to turn on the radio, press the AL on/off button (11) to
cancel this function and turn off the radio.
4. When you use the wake-on-radio function to turn on the radio, the radio will automatically turn off
after one hour..
ANTENNA

1. The radio receives MW by using the internal magnetic antenna. You can get the best reception by
rotating the direction of the radio.
2. When you receive FM station, please pull out the telescopic antenna to get the best reception by
changing its length and angle.
3. When you receive SW station, please pull out the telescopic antenna and keep it vertical to get
better reception.
TECHNICAL INDEX
1. Frequency Range :
oFM 87-108 MHz
oAM 526.5 - 1606.5 KHz
oSW 5.95 – 21.85 MHz
2. S.W Meter Band
o49m 5.95-6.20MHz 22m 13.60-13.80MHz
o41m 7.10-7.30MHz 19m 15.10-15.60MHz
o31m 9.50-9.90MHz 16m 17.50-17.90MHz
o25m 11.65-12.05MHz 13m 21.45 – 21.85 MHz
3. Noise Limit Sensitivity
oFM <= 20uV
oAM <= 3mV/m
oSW <= 100uV
4. Single Signal Selectivity <= 10dB
5. Power : DC 3V or 2 x AA batteries
6. Speaker : 57mm/4ohm/0.25W
7. Unit Size : 118 x 74 x 26 mm
8. Weight : 160g ( without battery)