K&B Furniture C1276 User manual

ASSEMBLYINSTRUCTIONS
Foreaseand speedofassemblywerecommendthatbeforeyoucommenceeachstepofthe
assemblythatyouidentify all the parts requiredtocompletethatstep.
We recommendthatwherepossibleyouallowsufficientspacetoassembletheitemascloseas
possibletotheplacewhereitwillbeonceassembled.
Forthe protection ofyourfurniturewerecommendthattheproductisplacedonprotected surfaces
during assemblytopreventanydamage.
Duringassembly do not overtighten,asthis maydamage theproduct.
Pleaseensureyou retainall theproduct packaging until the itemcompletelyassembled.
Pleaseperiodicallycheck all fittings andre-tighten as necessary.
Pleaseneverallowany liquidstoremainon yourfurnitureasabsorptioncancausethewood towarp
orfinishtode-laminate.
Itisrecommendedthatthis itemshouldbe assembled by twoadults.
NOTETO CUSTOMERS:
ConsoleTable

1/4"*1.5"

B
C
1). AssembleDivider(H)toBackPanel(G)usingWoodDowels(3),Cam-bolt(8)andCam-lock(6).
2). AssembleCrossBar(D)to Divider(H)usingBolts (4).
3). AssembleCrossBar(E)to Divider(H)usingBolts (4) andWood Dowel(3).
STEP1:
STEP2:
InsertWoodDowels(3)and Cam-bolts(8)intotheholes of SidePanels (B&C).

6
14 10 7
8
A
B
C
F
STEP3:
STEP 4:
Insert Wood Dowels(3) and Cam-bolts(8) into the holesof Top Panel(A).
Front
1). AssembleCross Bars(D&E) toSide Panel(B) usingCam-bolt(8)andCam-lock(6).
2). Assemble Back Panel (G) toSide Panel (B) using Bolts(14),Spring Washers(10) ang Flat Washers
(7).
3). Assemble BottomPanel (F) toSide Panel (B) using Bolts(5),Spring Washers(10) ang Flat Washers
(7).
4). Repeat abovestep toassemble the other Side Panel (C).
75

11 8
13
A
I
J
KL
M
J
K
I2X
STEP 5:
1).AttachTopPanel(A)toSidePanels(B&C),BackPanel(G) and Divider (H).
2).InsertCam-locks(6)intotheholesofSidePanels(B&C),BackPanel (G) and Divider (H) tocatch
Cam-bolts(8),thentightenCam-locks (6).
3).TightenTopPanel(A)toCrossBar(D)using Screws(9).
STEP 6:
1).AssembleDrawerSidePanels(J&K)toDrawerFrontPanel(I)usingWood Dowels(13), Cam-bolts
(8)andCam-locks (11).
2).InsertDrawerBottomPanel(M)intothegroovesofDrawerSidePanel (J&K) and Drawer Front
Panel(I).
3).AttachDrawerBackPanel(L)toDrawerSidePanels(J&K) using Screws(12) .
12
Front
B
C

2
1
2X
STEP7:
AttachDrawerHandle(1)ontoDrawerFrontPanel(I)usingBolts(2) .
STEP8:
Insertthedrawerintothisunit.