KanexPro SW-HD20-3X1 4K User manual

True 4K HDMI 3X1 Switcher
SW-HD20-3X1 4K
True 4K HDMI 3X1 Switcher with HDCP2.2
User Manual
For optimum performance and safety, please read these instructions carefully before
connecting, operating or adjusting this product. Please keep this manual for future
reference.
Introduction
The KanexPro SW-HD20-3X14K is a high-performance, three HDMI input to one
HDMI output switcher engineered to support True4K UHD resolutions up to
4K@60Hz with HDCP2.2 specifications. It also supports all 3D TV formats and Full
HD 1080p resolutions. Instantly switch between your 4K HDMI devices to one
display and control the switch using IR remote included. Perfect for home theater
rooms, small offices and other applications where there is a need to switch three
HDMI sources to one 4K display.
Features
▪Auto switch three HDMI sources to one 4K display
▪True 4K@60Hz UHD, 1080p & 3D resolutions
▪4Kx2K @30Hz with 24bit RGB, YCBCR 4:4:4 & YCBCR 4:2:2.
▪4Kx2K @60Hz with 12bit YCBCR 4:2:0
▪Computer resolutions up to QSXGA@60Hz
▪Supports 3D frame sequential video formats to 1080p @60Hz
▪HDCP 2.2 compliant
▪Digital audio support: LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master
Audio
▪High bandwidth for ultimate video experience
▪Front-panel LED’s for input/ output signal presence
▪Ultra compact design
▪5V DC external power supply included
▪Includes IR remote

True 4K HDMI 3X1 Switcher
Package Includes
UHD 3x1 HDMI Switcher--------------------------------- 1Pcs
5V/1A DC power adaptor-------------------------------- 1Pcs
Remote Control--------------------------------------------- 1Pcs
38KHz IR Receiver Cable--------------------------------- 1Pcs
User manual------------------------------------------------ 1pcs
Specifications
Video Bandwidth 300MHz/10.2 Gbps
Input Ports 3 x HDMI (Female type)
Output Ports 1 x HDMI (Female type)
Output Resolution 480i ~1080p50/60, 4Kx2K@24/30,
4k2k@60Hz with 12bit YCBCR 4:2:0, VGA~UXGA
ESD Protection: ±8 kV (air-gap discharge)
Human Body Test: ±4 kV (contact discharge)
Power Supply : 5 V/1A DC
Dimensions 2.51” (W) × 6.1” (D) × .67” (H)
64 mm (W) × 155mm (D) × 17 mm (H)
Weight 6.35 oz. (180 g)
Chassis Material Metal
Operating Temperature 0 °C~40 °C/ 32 °F~104 °F
Storage Temperature −20 °C ~ 60 °C/−4 °F ~140 °F
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 2W
Connecting Directions and Operation
Using a high-speed HDMI cable, connect any media sources (EX: Blu-Ray player,
gaming platform, satellite receivers, computers, etc.) equipped with HDMI output
interfaces to the SW-HD20-3X14K Switchers inputs.
Using a high-speed HDMI cable, connect the HDMI output of the SW-HD20-3X14K
to a high-definition display device (EX: HD-LCD, HD-DLP, HD projectors, etc.) with
HDMI input interfaces.
NOTE: To achieve the best performance with the SW-HD20-3X14K, adhere to
recommended specifications for proper high-speed HDMI cable runs and signal
length according to HDMI Specification V2.0.

True 4K HDMI 3X1 Switcher
The SW-HD20-3X14K is powered by an external 5VDC power supply included in the
packaging. Before connecting any power supplies, be sure all source and sync devices
interfacing with the SW-HD20-3X14K are powered down and unplugged. Connect
the power supply to the electrical outlet first. Next connect the power jack to the
SW-HD20-3X14K. Finally, connect power to each media source and each HD
display.
Front Panel
1. ‘POWER’LED: This blue LED illuminates when the device is connected to the
power supply.
2. IN 1, IN2, IN3 LED: These blue LEDs illuminate when an Input Source is selected.
The Illuminated LED indicates the Input Source being transmitted to the HDMI
output.
3. SERVICE: This service port is for Manufacturer’s use only.
4. IR Receiver: The IR Receiver interfaces with the included remote control. Connect
the IR Receiver to the SW-HD20-3X14K via the 3.5mm jack input labeled ‘IR.’ Next
secure the IR Receiver end to a visible and open surface using a light adhesive or tape.
Connect the batteries in the remote control. Select the desired input source on the
switcher using your remote control.
NOTE: Be sure the remote control has direct line of sight to the IR receiver end. IR
requires open line of sight between the remote and the receiver in order to work
properly.

True 4K HDMI 3X1 Switcher
5. INPUT BUTTON: Pressing ‘Input button’ will select between different input
sources. Press the “Input Button” until the desired input source has been selected.
Rear Panel
1. HDMI IN1, IN2, IN3: Using a high-speed HDMI cable, connect media devices to
each input port via the HDMI output of your devices (Blu-Ray Player, Gaming
Console, PC, etc.).
2. HDMI OUT: Using a high-speed HDMI cable, connect the HDMI output of the
SW-HD20-3X14K to a high-definition display (HD-LCD, HD-DLP, HD projectors,
etc.).
3. DC 5V: Plug the included 5V DC power supply jack into the unit and connect the
adaptor to an AC outlet.
Remote Control
Input source select buttons: the Blue LEDs on the panel will
indicate the input source selected.

True 4K HDMI 3X1 Switcher
Connection Diagram
Warranty
KanexPro warrants its products will greatly perform to their published specifications and will be
free from defects in materials and workmanship under normal use, conditions and service for up
to three years. For more information regarding warranty details, please visit:
http://www.kanexpro.com/warranty/.
Support
KanexPro Technical and Customer support inquiries can be sent electronically via the following
avenues:
Tech Support Inquiry: http://www.kanexpro.com/support/
Email: [email protected]
KanexPro Customer support can be reached via phone at [phone] (International Calls:
1-714-332-1682) during the following times:
Monday –Friday: 6:00 am –5:00 pm PST