KanexPro SW-SDI4X1 User manual

3G SDI 4X1 Switcher
SW-SDI4X1
Content
1 INTRODUCTION………………….…………………………1
2 SPECIFICATION…………..……..…………………..……..2
3 PACKAGE CONTENT……….……………………………..3
4PANEL DESCRIPTION………………….………….………3
5 CONNECTION AND OPERATION…………..……………4
6 WARRANTY…………..……………………………………..6

SW-SDI4X1
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
1!
1 INTRODUCTION
1.1 Product Description
The KanexPro SDI switcher is a 4 input, one output switcher designed to
switch four SDI, HD-SDI or 3G-SDI sources to one SDI monitor or display
output. For optimum performance the SDI switcher can be controlled using
RS-232 to switch the inputs. The 4X1 switcher includes re-clocking technology,
which drives the signal at longer distances and supports SDI, HD-SDI and
3G-SDI signals. It supports multi-stage cascading for adding more SDI
components and switchers.
Ideally used with SDI based HDCCTV surveillance systems, rental & staging
facilities, post-production, TV studio, digital cinema, or other A/V applications
where you need to switch and split from an SDI camera or other device
equipped with 3G/HD/SD-SDI outputs to one SDI-compliant display or video
processor.
1.2 Features
▪Get the highest quality 3G-SDI Switching
▪Supports multiple video resolutions
▪SDI 480i, 525i, 625i
▪HD: 720p 24, 25,30,50 & 60 Hz.
▪HD: 1080i 50 & 60 Hz.
▪HD: 1080p 24, 25,30, 50 & 60 Hz.
▪Memory function recalls last input after restart
▪Supports multiple Color Space: RGB or YCbCr 4:4:4 sampling
▪Support for YCbCr: 4:2:2 or 4:2:0 sampling
▪Data rates up to 2.97 Gbps
▪Supports 8 bit, 10 bit & 12 bit color depth
▪3G Mode (1080p/60) length support - up to 80m
▪SDI Input cable length support - up to 300m
▪HD mode length up to: 130m
▪Input / Output equalizer function
▪Automatically switches between SD, HD and 3G-SDI standards
▪Compact in size, perfect for mobile broadcasting units and users
▪Small rack mount ears included
▪Compatible with HDcctv 1.0, HD-SDI (ST-292), 3G-SDI (ST-424) and
SD-SDI (ST-259)1

SW-SDI4X1
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
2!
Note:
RG6 or RG59 cable is required for SDI transmission; we recommend a
75-ohm high quality coaxial cable. For supported distances at high resolutions
over RG6, please check our Specs tab..
2 SPECIFICATION
Signal Input/ Output
Input Connector
4xSDI BNC Male
Output Connector
1xSDI BNC Male
Support line length (Cable is RG6 )
Input 3G(1080P 60HZ) Mode
Up to 328 Feet (100m)
Output 3G(1080P 60HZ) Mode
Up to 295 Feet (90m)
Input HD(720P 60HZ)Mode
Up to 722 Feet (220m)
Output HD(720P 60HZ)Mode
Up to 590 Feet (180m)
Input SD(480i)Mode
Up to 1050 Feet (320m)
Output SD(480i)Mode
Up to 918 Feet (280m)
Mechanical
Size(L-W-H)
6.37 x 3.34 x 1.0 inches
Weight (Net)
(net): 0.83 lbs. (380 grams)
Warranty
Limited Warranty
1 Year (Parts & Labor)
Environmental
Operating Temperature
0 ℃to +70℃
Operating Humidity
10% to 85 % RH (no condensation)
Storage Temperature
-10℃to +80℃
Storage Humidity
5% to 90 % RH (no condensation)

SW-SDI4X1
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
3!
Power Requirement
External Power Supply
5V DC@ 2A
Power consumption (Max)
3W
Regulatory Approvals
Converter Unit
FCC, CE, UL
Power Supply
UL, CE, FCC
Accessories Adapter
User Manual
English version
Note: Specifications are subject to change without notice.
3 PACKAGE CONTENT
Before using this unit, please check the packaging and make sure the
following items are contained in the shipping carton:
!1XMain unit
!1XPower adapter 5V@2A
!1XUser's Manual
4. PANEL DESCRIPTION
Power in, DC 5V/2A adapter available;
RS232 interface, connect to computer system;
Four SDI inputs connect to SDI source, such as SDI Camera;
One SDI output connects to SDI monitor or other SDI Device.

SW-SDI4X1
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
4!
5 CONNECTIONS AND OPERATION
5.1 Connections and Operation
(1) Connect the product to appropriate power；
(2) Connect SDI signal to the “SDI in” through 75Ωcoaxial cable with
high-quality（RG59 cable or equivalent as well）;
(3) Connect the unit to the next SDI monitor or other SDI devises through the
75Ωcoaxial cable.
(4) Operate the SDI signal to start the show.
5.2 Functional Operation-RS232
Connect the PC’s RS232 interface to the RS232 on the back of the main unit;
user can select the input source by entering the command through the “DOS”
or "hyper terminal" on the PC.
Under the “DOS” operating system:
1, You need to check the computer serial port number, such as the COMx.
2, Input “MODE COMx:9600,N,8 ,1”, + Enter.
3, Input “TYPE CON>COMx”，+ Enter.
4, Input the “Input port No” of the switcher as the serial number of DOS
system, such as “1”、“2”、“3”、“4”+ Enter.
5, Select the corresponding serial number which need to start, then you
can realize the switching function.
Under the “Hyper terminal” operating system:
1, Start the “hyper terminal” software. (Menu→Procedure→Communication
→hyper terminal, + Enter)
2, Input the name as your preference New Connection show interface, +
Enter.
3, Select the correct serial port number, + Enter.
4, BPS set to 9600, DFC select “no”. + Enter
5, Input the “Input port No” of the switcher as the serial No of DOS system,
such as “1”、“2”、“3”、“4”+ Enter.
6, Select the corresponding serial number that needs to start, then you can
realize the switching function. (Hyper terminal is the software comes with the
computer system, if no, you can download it through the Internet.)

SW-SDI4X1
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
5!
5.3 Connection Diagram

SW-SDI4X1
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
6!
6 WARRANTY
KanexPro TM warrants that (a) its products (the “Product”) will perform greatly in agreement with the accompanying written
materials for a period of 12 months from the date of receipt (1 year) and (b) that the product will be free from defects in materials
and workmanship under normal use and service for a period of 1 year.
B. CUSTOMER REMEDIES
KanexPro’s entire liability and Customer’s exclusive remedy shall be, at KanexPro option, either return of the price paid for the
product, or repair or replacement of the Product that does not meet this Limited Warranty and which is returned to KanexPro
with a copy of customers’ receipt. This Limited Warranty is void if failure of the Product has resulted from accident, abuse, or
misapplication. Any replacement Product will be warranted for the remainder of the original warranty period of 1 year,
whichever is longer.
C. NO OTHER WARRANTIES
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, KANEX DISCLAIMS ALL OTHER WARRANTIES,
EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, WITH REGARD TO THE PRODUCT AND ANY
RELATED WRITTEN MATERIALS. THIS LIMITED WARRANTY GIVES CUSTOMERS SPECIFIC LEGAL RIGHTS.
CUSTOMERS MAY HAVE OTHER RIGHTS DEPENDING ON THE JURISDICTION.
!D. NO LIABILITY FOR DAMAGES!
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL KANEX BE LIABLE FOR
ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT LIMITATION, SPECIAL, INCIDENTAL, CONSEQUENTIAL,
OR INDIRECT DAMAGES FOR PERSONAL INJURY, LOSS OF BUSINESS PROFITS, BUSINESS INTERRRUPTION,
LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF OR
INABILITY TO USE THIS PRODUCT, EVEN IF KANEX HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Brea, California
KanexPro.com
MPN: SW-SDI4X1
HDMI are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Kanex is a trademark of Apogee
Inc., registered in the U.S.