Kangook AMARUK User manual

1
Kangook User Manual
2021 Edition
All rights reserved
Table of Contents
Preface ......................................................................................................................... 3
I - Motors ..................................................................................................................... 4
1)Technical Characteristics ....................................................................................... 4
2) The different engine mounts.................................................................................. 6
3) Fixing the motor on the frame............................................................................... 7
4) Starter installation ................................................................................................ 9
5) Fitting the throttle............................................................................................... 11
II - The Cage............................................................................................................... 13
III –Fixing the goosenecks arms................................................................................. 24
Tubular gooseneck swing arms ............................................................................... 24
CNC gooseneck ....................................................................................................... 26
IV –Harnesses: Fixing & safety .................................................................................. 28
Harness, APCO ....................................................................................................... 28
Attaching the harness to the frame ...................................................................... 28
Attaching the carabiners...................................................................................... 33
Attaching the safety strap .................................................................................... 35
Harness, DUDEK .................................................................................................... 36
Attaching the harness to the frame ...................................................................... 36
Attaching the carabiners...................................................................................... 37
Attaching the safety strap .................................................................................... 39
V - Settings ................................................................................................................ 40
V –Checklist .............................................................................................................. 42
Contacts .................................................................................................................... 45

2
Kangook User Manual
2021 Edition
All rights reserved
Warning
This manual should be read carefully before using your Kangook product.
Flying any paramotor involves risk but this can be reduced if you respect the following
instructions. The Kangook Paramotor’s 3 year manufacturing warranty does not cover
damaged caused by wrecks and accidents. The pilot is solely responsible for assessing
the condition of all flying equipment, the legality of the flight in accordance to local
regulations, the weather conditions surrounding the flight, the pilot’s mental and
physical state and any other factor relevant to the flight. Failure to do so may result in
injury or death.
The regulations concerning the operation of Paramotors / Motorized Paragliders (PPG)
will differ depending on your country. Before flying, ensure any local licensing
requirements (if applicable), laws, rules and regulations are met.
Always complete a preflight inspection and check your aircraft before taking off. You
alone are the pilot in command and are solely responsible for the decisions you make in
the course of your flight. If your paramotor equipment is not functioning properly, do
not fly until you have corrected the problem. Remember, take-offs are optional, while
landings are not.

3
Kangook User Manual
2021 Edition
All rights reserved
Preface
Thank you for purchasing a Kangook Paramotor! We hope that our pursuit of
aeronautical innovation will help you to (re)discover the pleasure of powered flight in
complete safety.
Since 2008, we have designed, developed, and manufactured a wide range of modular
foot launch and trike launch paramotors.
Our paramotors/motorized paragliders (PPGs) frames are completely manufactured from
start to finish in Canada with a particular focus on superior quality and details.
In this guide you will find all the information about fastening systems, paramotor
components, and precautions to take before enjoying your first flight. However, this
document does not replace the training you will receive at a training center or the advice
of your local dealer.
Please note that some details or images presented in this guide may be different from
those corresponding to your equipment.

4
Kangook User Manual
2021 Edition
All rights reserved
I - Motors
1)Technical Characteristics

5
Kangook User Manual
2021 Edition
All rights reserved
More information is available at:
Vittorazi.com |Polini.com |corsairmotors.com | Minari.com

6
Kangook User Manual
2021 Edition
All rights reserved
2) The different engine mounts
Moster 185 Plus Atom 80
Nitro 200 Black Devil M25Y
Polini

7
Kangook User Manual
2021 Edition
All rights reserved
3) Fixing the motor on the frame
Amaruk frame and Moster 185
Required Items:
- 4 M8 screws
- Glue
- 13 mm wrench
- 6 mm Allen wrench

8
Kangook User Manual
2021 Edition
All rights reserved
Position the Amaruk frame so that
the mounting holes shown in photo 2 are aligned
with the motor vibration isolators (photo 1).
Attach the motor to the frame by lightly tightening the 4 screws without thread
locker.
1
2
3
4

9
Kangook User Manual
2021 Edition
All rights reserved
4) Starter installation
Remove one screw at a time
adding a dab of removable
thread locker. Tighten while
leaving the other screws in
place. This helps ensure that
the frame and engine stay in
alignment.
This operation must be repeated
for each of the 4 screws.
5
6
Required Items:
- 1 pulley
- 1 starter handle
- 1 cord
- 1 small torch

10
Kangook User Manual
2021 Edition
All rights reserved
- Cut the tie rap
- Untangle the cord
-Pass the cord through
the pulley
- Pass the cord through
the handle
- Leave 30 cm of cord
between the pulley and
the end and tie a knot.
- Burn the end of the cord remaining after the knot with a small torch.
- Camouflage the knot in the handle as shown in photo 6.
1
2
3
4
5
6

11
Kangook User Manual
2021 Edition
All rights reserved
5) Fitting the throttle
1
2
3
4
5
6
- Unscrew the lock (photo 1)
and insert the threaded
fitting (photo 2)
- Insert and heat a piece of
heat shrink around the
threaded insert head and the
cable (photo 4)
- Strip the wire of photo 5
- Thread the part shown on
photo 6 through the wire and
crush the highlighted part to
secure it

12
Kangook User Manual
2021 Edition
All rights reserved
7
9
10
8
11
12
- Insulate the cable with heat
shrink
-Twist the part 90 degrees
using pliers
-Affix a spade connector
to the other wire similar
to the ringer terminal.
This is shown on photos
8 and 9.
- Assemble the 2 parts
as shown in photo 11.
Secure the assembly by
screwing in 2 bolts.
-Add the part shown in
photo 12 and the lock.

13
Kangook User Manual
2021 Edition
All rights reserved
II - The Cage
The Amaruk is composed of 3 sections. Mounting the cage on the frame is easy
and can be done in 3 steps.
Note: The cage sections come with the connectors and Velcro straps already in place.
The Amaruk frame and its cage before fixing the Velcro straps.

14
Kangook User Manual
2021 Edition
All rights reserved
Required Items :
- 1 Amaruk frame
- 2 cage sections for each side (with connectors and Velcro straps)
- 1 top cage section (with connectors and Velcro straps)

15
Kangook User Manual
2021 Edition
All rights reserved
Step 1 : Connect the left and right sections of the cage
2. Keep your foot on the frame to stabilize it.
Apply pressure on the cage with the
outstretched arm (as shown opposite) to
engage the second attach point (photo a) in the
Amaruk frame.
2
1. Position the lower part (photo b) of the cage
in the corresponding location on the frame.
1
a
b

16
Kangook User Manual
2021 Edition
All rights reserved
Step 2 : Connect the upper section of the cage
Position the upper part of the Amaruk cage
as illustrated opposite.
Fit the 4 connectors into the corresponding
end caps.
Step 3 : Fix the 3 parts together
1. Grab the upper part of
the cage in the location
shown in figure 1 and 2,
pre-tightening them
towards each other.
2. Hold these two cage
parts together using the
Velcro. Ensure tension is
applied when tightening the
Velcro to ensure it is held
in position.
1
2

17
Kangook User Manual
2021 Edition
All rights reserved
4. Repeat the process, attaching the 6
Velcro straps highlighted in orange in the
opposite photo.
3. Final result
3
4

18
Kangook User Manual
2021 Edition
All rights reserved
Attach the straps circled in white from the photo on the previous page:
Hold the cage this way for better stability and better tightening.
1
2
3
4

19
Kangook User Manual
2021 Edition
All rights reserved
Move the strap several times as shown in photos 5 and 6 to adjust the tightness.
Remark: To remove the cage more easily, apply
pressure as shown on this photo:
5
6
7
Final result