Fly Products VERTIGO User manual

© Copyright by FLY Products s.r.l.
Via Perù n. 30
63013 GROTTAMMARE (AP) - ITALY
tel./fax [phone]
www.flyproducts.com - [email protected]
VER. 2.0

VERTIGO USER MANUAL VER. 2.0
Page 2
WHITE PAGE

VERTIGO USER MANUAL VER. 2.0
© Copyright FLY Products s.r.l. Page 3
Index
Chapter
Description
1.0
VERTIGO FEATURES
2.0
OVERALL DIMENSIONS
3.0
FRAME ASSEMBLY
4.0
PROTECTION CAGE ASSEMBLY
5.0
EMERGENCY PARACHUTE
6.0
WARRANTY

VERTIGO USER MANUAL VER. 2.0
Page 4
The trike Vertigo is designed to be particularly strong and stable during all phases
of takeoff and landing. Its low center of gravity makes it very stable in all the
maneuvers. In flight surprises its ability to counteract the torque effect due to the
rotation of the propeller. The seat is very comfortable. The front is adjustable and
adapted to the height of several pilots. On this Trike is possible to install any
paramotor Fly Products and the new frame Easy Removal.
Technical features
Available Engine Type =
Moster 185, Moster Factory R, Thor 202,
Thor 303, Cosmos 300.
Weight without engine =
35 Kg. / 77.1 lbs.
Fuel Tank =
16 Lt. / 4.2 gal.
Propeller length =
150 cm / 59.0 in.
Overall Dim. LENGHT =
198 cm / 77,9in.
Overall Dim. WIDTH =
180 cm / 70,8 in.
Overall Dim. HEIGHT =
180 cm / 70,8 in.
Available optionals
Cockpit
RPM/Hour
counter
Digital
altimeter
USB
port
Rescue
system
1 –VERTIGO FEATURES

VERTIGO USER MANUAL VER. 2.0
© Copyright FLY Products s.r.l. Page 5
2 –OVERALL DIMENSIONS
,7

VERTIGO USER MANUAL VER. 2.0
Page 6
FOLDED HEIGHT = cm. 60 / in. 23,6
cm. 110 / ft. 3,6
cm. 100
ft. 3,3

VERTIGO USER MANUAL VER. 2.0
© Copyright FLY Products s.r.l. Page 7
Frame assembly and disassembly is very fast and easy.
The best way is to proceed in the following order:
3 –FRAME ASSEMBLY
Mount the stand for the assembly
Open the cradle

VERTIGO USER MANUAL VER. 2.0
Page 8
Lock with bolt
Right position for engine
with BELT drive
Left position for engine
with MECHANICAL drive
Right position for engine
with belt drive
Left position for engine
with mechanical drive
To counteract the torque generated by the engine,
mount the upper and front cradle SPACER according to
the type of transmission of the installed engine.
! Both spacers must always be on the same sides !

VERTIGO USER MANUAL VER. 2.0
© Copyright FLY Products s.r.l. Page 9
Turn the strap of the harness around the beam,
click it and tight it accordingly.
Locking the cradle

VERTIGO USER MANUAL VER. 2.0
Page 10
Insert the front piece
Lock the front piece with the hand nut