Karl Lagerfeld JS15 User manual

3
Time Setting
1. Pull crown out to position 2.
2. Turn crown to set the hour and minute hands to desired time.
3. Return crown to position 1.
1 2
ANALOG INSTRUCTIONS
1 2
ENGLISH
1 2
SMALL SECOND HAND

4
CHRONOGRAPH JS15
Time and Date Setting
1. Pull crown out to position 2.
2. Rotate crown clockwise until the previous day’s date is shown in
the date window.
3. Pull crown out to position 3.
4. Rotate crown clockwise until the correct date is shown in the
date window.
5. Continue to rotate crown to set correct am/pm time.
NOTE: 24-hour hand moves correspondingly with the hour and
minute hands. When setting the time be sure to check that the
24-hour hand is set properly.
6. Return crown to position 1.
NOTE: When the crown is in position 2, do not press the pushers.
Otherwise the chronograph hands will move.
NOTE: Do not set the date between 9:00 p.m. and 1:00 a.m. to
ensure accuracy.
Chronograph
1. Press A to start/stop the chronograph.
2. Press B to reset to zero.
Chronograph Zero Reset
1. If either of the chronograph hands is not at the zero (12:00)
position, pull crown out to position 3.
CHRONOGRAPH
SECOND HAND
CHRONOGRAPH
MINUTE HAND
24-HOUR HAND A
B
1 2 3

5
2. Press A to move hands clockwise; press B to move hands
counter-clockwise. Each press of A or B will move the
chronograph hands by one increment/decrement. Or press
and hold A or B for fast increment/decrement.
3. When both hands are in the zero position, reset time and
return crown to position 1.
NOTE: Chronograph minute hand will synchronize with
chronograph second hand during chronograph zero reset.
CHRONOGRAPH STOPWATCH VD55
Time Setting
1. Pull crown out to position 3.
2. Set time by turning crown clockwise.
3. Return crown to position 1 to start watch.
Using the Stopwatch
1. Press A to start/stop the stopwatch.
2. Press B to control the split time and reset.
Stopwatch Hand Adjustment
1. Pull crown out to position 3.
2. Press A to reset the stopwatch 1/10 second hand to the
“0” position.
1 2 3
B
A
MINUTE HAND
SECOND HAND
1/10 SECOND HAND

6
3. Press B to reset the second and minute hands. The hands only
move clockwise.
4. With each press of A or B, the hands move one position. They
move quickly if the buttons are kept pressed.
NOTE: If the stopwatch hands function improperly, pull out
crown and press A and B at the same time for over 2 seconds.
When the buttons are released, the stopwatch second and
1/10 second hands will spin around and return to “0.” This will
indicate that the internal circuit has been reset.
Date Setting (on some models only)
1. Pull crown out to position 2.
2. Turn clockwise until desired date appears in window.
3. Return crown to position 1.