Kasco marine 1400JF User manual

1400JF & 1400JFL
Aerating Fountain
1/4HP, 120V, Single Phase
Includes all 5 Patterns
Patterns (Upper L to R)
Osprey—3.5’H x 7’W
Falcon—4’H x 4’W
Condor—4’H x 4’W inner, 2’H x 10’W
outer
Patterns (Lower L to R)
Eagle’s Nest—3.5’H x 10’W
Hawk’s Nest—3’H x 7’W
Quick Facts
 Complete Package is Fully Assembled
and includes Motor Unit, Power Con-
trol Panel, UV Resistant High Density
Thermoplastic Float, Two 15’ Braided
Nylon Mooring Lines, SJTOW Rated 3
Wire Power Cable, and 5 Glass Filled
Thermoplastic Deflector Nozzles (LED
Light Ring with 50’ Cord is Standard
on 1400JFL Models)
 Operates in 12” (30.5cm) of Water
 Total Package Listed by ETL to meet
UL and CSA Standards for Safety in
Water
 Series 300 Austenitic Stainless Steel
Construction of Exposed Metal
 2 Year Warranty
 UPS Shippable
 LED Light Ring with 50’ Cord and
Transformer is Standard with 1400JFL
Units and Optional with 1400JF Units
 Energy Efficient with Excellent GPM/
kW Rates
 Industrial Strength Design
 Top Intake for Shallow Water Opera-
tion
 UV Resistant Thermoplastic Fountain
Housing has Built In Screening to Keep
Debris Out and Allow for Maximum
Water Flow Into the Unit
Features
Motor Unit
 1/4HP, 120V, Single Phase
 1750 RPM Motor
 Oil Cooled
 Continuous Duty Rated Motor
 Two Long Life Bearings
 Thermal Overload Protection
 Fully Unitized Heavy Duty Carbon
Ceramic Mechanical Seal
 Series 300 Austenitic Stainless
Steel Motor Can with Engineering
Grade Thermoplastic Top
Power Cable
 SJTOW UL, CSA, and NEC Ap-
proved Underwater Rated Cable
 3 Wire
 50’, 16 Gauge Power Cable
Fountain Components
 UV Resistant 4 Blade Engineered
Thermoplastic Propeller with All
Blades on the Same Plane
 UV Resistant Thermoplastic Foun-
tain Housing
 All 5 Deflector Nozzles Included
with Series 300 Stainless Hardware
 UV Resistant Thermoplastic De-
flectors
 Quick Nozzle Change/
Replacement
Optional Lights
 LED Light Ring
 50’ SJTOW UL, CSA, and NEC
Approved Underwater Rated Cable
 Built In Low Voltage Transformer
 ETL Approved
Control Panel
 U.L. Listed Industrial Controller
 15 Amp Class A Human Rated
GFCI Outlets
 Photo Cell for Light Kit
 NEMA Type 3R Weatherproof En-
closure
 24 Hour Mechanical Timer
Float
 U.V. Resistant High Density Ther-
moplastic
 Single Piece Float
 Series 300 Stainless Steel Hardware
 Two 15’ Braided Nylon Mooring
Ropes

Kasco 1400JF & 1400JFL Specifications
Model # HP
Cord
Length
Cord
Gauge
Voltage/
Phase/Hz
Running
Amps
Lock Rotor
Amps
Lights
Included
Min. Depth
of Operation
Shipping
Weight
Number
of Boxes
Sugg. Pond
Size (S.A.)*
1400JF050 1/4 50’ 16/3 120/1/60 3.1 9 No 12” 34 Lbs. 1Up to 1/5
1400JFL050 1/4 50’ 16/3 120/1/60 3.1 9 Yes 12” 35 Lbs. 1Up to 1/5
Kasco Optional Lighting Package Specifications
Model #
Cord
Length
Number of
Fixtures
Voltage/
Phase/Hz
Wattage Per
Fixture
Total
Wattage Lens Position
Shipping
Weight
Number of
Boxes
L140 50’ 1 12/1/60 12 12 Above Water 5 Lbs. 1
Kasco Marine, Inc.
800 Deere Rd.
Prescott, WI 54021
Ph: [phone] * Fax: [phone]
www.KascoMarine.com * www.GotAlgae.com
[email protected]
Operation
 Submersed motor with top intake
draws water into the fountain hous-
ing and pushes the water past the
deflector nozzle and into the air.
 Individual water droplets absorb
oxygen from the atmosphere and
return to the body of water transfer-
ring oxygen from the air and into
the water.
 Moving water mixes and agitates
the water, spreading oxygenated
water throughout the body of water.
 Single propeller and deflector noz-
zle design allows for greater water
flow with a lower likelihood of
clogging.
 UV resistant thermoplastic fountain
housing screen shall catch large
debris and assist in reducing the
likelihood of clogging.
Assembly and Installation of Kasco equipment is
quick and easy. Each unit includes an Owners Man-
ual with specific steps to assemble, install, and oper-
ate the equipment properly.
The Optional Lighting Package easily
mounts to the float and can be purchased
and added at any time. ETL approved.
Each unit includes a UL Approved Control
Panel complete with Class A Human Rated
GFCI Protection, 24 Hour Mechanical Timer,
and Photo Eye for Optional Light Kit. NEMA
Type 3R weatherproof enclosure.
During unit operation, water is circulated
from 360O around the unit as well as from
below. Top intake for shallow water opera-
tion.
The motor unit attaches to the float using stainless steel
hardware for a secure assembly. The single section, U.V.
resistant, high density thermoplastic float allows for ex-
cellent durability with an attractive shape and low visibil-
ity. The rigid polypropylene fountain housing helps pro-
tect the unit from debris and reduce the likelihood of
clogging.
1400JF Without Lights
1400JFL With Lights
Rev. 1/15/13
* Surface acreage (SA) is determined by multiplying length x width of the pond. The actual shape, depth, and oxygen demand should be considered when
selecting a unit size.