Kawachi K 547 User guide

www.kawachigroup.com [email protected]
Thanks for joining kawachi group family . If you find any difficulty
in setting up the product or you find anything missing in the product
packing please call us on customer care number .
9326 110 110 Scan QR Code To
Scan QR code to
access video for
instructions guide
to setup the product
Product
Code K 547
Product
Setup
Manual
MULTIPURPOSE
TABLE WITH
STORAGE
DIY (Do it yourself) Furniture could be a
new category for some customers.
At Kawachi we want to help customers
to make furniture assembly easy and
resolve the issues if any.
...?
Step 4 :
Step 5 :
Step 6 :
Assemble Two ply 2 at Position by
Aligning Holes to frame 2 & 3 as
shown (use- Self Threading Screw
(FH-08)- 08 Nos)
Assemble Assemble cross support
strip to metal frame (use- M6X32
Nut-Bolt (FH-11)- 04 Nos)
Rotate the table, place it on frame.
And your table is ready to use.

Hardware List
Bill Of Materials Assembly Steps
SCREW DRIVER (FH-07)
QTY-01 NOS
METAL FRAME 1
QTY-01 NOS
PLY 2 (390X480X18MM)
QTY-02 NOS
PLY 2 (390X340X18MM)
QTY-02 NOS
CROSS STRIP
QTY-02 NOS
METAL FRAME 2
QTY-01 NOS
METAL FRAME 3
QTY-01 NOS
PLY 1 (900X400X18MM)
QTY-01 NOS
Step 1 :
Step 2 :
Step 3 :
NUT (FH-10) M6
QTY-04 NOS
SELF THREADING SCREW (FH-08) & WASHER M6
QTY-16 NOS
BOLT (FH-11) M6X32
QTY-10 NOS
S HOOK (FH-14)
QTY-05 NOS
Place top PLY 1 (900X400X18)
hole side up on a flat, protected
surface.
Assemble three Frame at Position
by Aligning Holes on ply as
shown (use-M6X32 bolt (FH-11)-
06 Nos.). Make sure hole
orientation should same.
Assemble Two ply 2 at Position by
Aligning Holes to frame 1 & 2 as
shown (use- Self Threading Screw
(FH-08)- 08 Nos.)
FRAME-1 FRAME-2 FRAME-3
For Next Step Turn The Page