Kawachi KW 25 User guide

www.kawachigroup.com [email protected]
Thanks for joining kawachi group family . If you find any difficulty
in setting up the product or you find anything missing in the product
packing please call us on customer care number .
9326 110 110 Scan QR Code To
Scan QR code to
access video for
instructions guide
to setup the product
Product
Code KW 25
Product
Setup
Manual
COMPUTER DESK
WRITING STUDY
TABLE WITH 4 TIER
BOOKSHELVES
DIY (Do it yourself) Furniture could be a
new category for some customers.
At Kawachi we want to help customers
to make furniture assembly easy and
resolve the issues if any.
...?
Assemble frame 2 at Position by
Aligning Holes to Sq. tube 2 as shown.
(use- M6X38 Nut-bolt(FH-09)-01 Nos)
Assemble M6 STUD(FH-04) at
outermost hole of ply 3.
Assemble cross strips at Position by
Aligning Holes on frame 1 and frame 2
as shown.
(use- M6X38 Nut-bolt(FH-09)-04 Nos)
Assemble ply 3 at Position by Aligning
Holes to Sq. tube and frame 2 as shown.
(use- M6X32 Nut-bolt(FH-11)-04 Nos)
Step 8 : Step 9 :
Step 6 : Step 7 :

Hardware List
Bill Of Materials
Assembly Steps
BOLT(FH-11)M6X32
QTY-04 NOS
BOLT(FH-09)M6X38
QTY-10 NOS STUD M6 & LOCKNUT (FH-04)
QTY-02 NOS
NUT (FH-10) M6
QTY-04 NOS
SCREW DRIVER (FH-07)
QTY-01 NOS
SELF THREADING SCREW & WASHER M4(FH-08)
QTY-17 NOS
METAL FRAME 1
QTY-02 NOS
METAL FRAME 2
QTY-01 NOS
PLY 1(470X185X18MM)
QTY-03 NOS
PLY 2(470X115X18MM)
QTY-01 NOS
PLY 3(1200X520X18MM)
QTY-01 NOS
SQUARE TUBE 1(25X470MM)
QTY-02 NOS
SQUARE TUBE 2(25X900MM)
QTY-01 NOS
CROSS STRIP
QTY-02 NOS
Place two metal frame 1.
(Make sure that hole
orientation should be
same)
Assemble three ply 1 at
Position by Aligning Holes
to frame as shown
(use Self Threading Screw
(FH-08)-12 Nos.)
Assemble ply 2 at Position
by Aligning Holes to frame
as shown
(use Self Threading Screw
(FH-08)-04 Nos.)
Step 1 : Step 2 : Step 3 :
Assemble two Sq. tube 1 at Position by
Aligning Holes to frame as shown.
(use- M6X38 Nut-bolt(FH-09)-04 Nos)
Assemble Sq. tube 2 at Position by
Aligning Holes to Sq. tube 1 as shown.
(use- M6X38 Nut-bolt(FH-09)-01 Nos)
Step 4 : Step 5 :