KB VISION KX-DR01 User manual

1
Fingerprint Access Control Integration Host
User’s Manual
V1.0.0

Table of Contents
1 Overview...................................................................................................... 0
2 Device Structure and Installation ................................................................. 1
3 System Structure ......................................................................................... 3
3.1 System Structure............................................................................................. 3
3.2 Device Port ..................................................................................................... 3
4 Function Setting ........................................................................................... 5
4.1 Login ............................................................................................................... 5
4.2 User Management ........................................................................................... 5
4.2.1 Add User ............................................................................................... 6
4.2.2 Add Super Password ............................................................................ 7
4.2.3 Delete User ........................................................................................... 8
4.2.4 Add More Master Card .......................................................................... 9
4.3 A&C ................................................................................................................ 9
4.3.1 Period ................................................................................................... 9
4.3.2 Master Card ........................................................................................ 12
4.3.3 Unlock Mode ....................................................................................... 12
4.3.4 Door Lock Time ................................................................................... 13
4.3.5 Alarm .................................................................................................. 13
4.3.6 Door Status Setup ............................................................................... 14
4.4 System Settings ............................................................................................ 15
4.4.1 Local Setup ......................................................................................... 15
4.4.2 Communication Setup ......................................................................... 16
4.4.3 Mode ................................................................................................... 17
4.4.4 Reboot System ................................................................................... 17
4.5 System Info ................................................................................................... 17
4.5.1 Card History ........................................................................................ 18
4.5.2 Alarm History ...................................................................................... 18
4.5.3 Local Info ............................................................................................ 19

Important Safeguards and Warnings
Please read the following safeguards and warnings carefully before using the product in
order to avoid damages and losses.
Note:
 Do not expose the device to lampblack, steam or dust. Otherwise it may cause
fire or electric shock.
 Do not install the device at position exposed to sunlight or in high temperature.
Temperature rise in device may cause fire.
 Do not expose the device to humid environment. Otherwise it may cause fire.
 The device must be installed on solid and flat surface in order to guarantee
safety under load and earthquake. Otherwise, it may cause device to fall off or
turnover.
 Do not place the device on carpet or quilt.
 Do not block air vent of the device or ventilation around the device. Otherwise,
temperature in device will rise and may cause fire.
 Do not place any object on the device.
 Do not disassemble the device without professional instruction.
Warning:
 Please use battery properly to avoid fire, explosion and other dangers.
 Please replace used battery with battery of the same type.
 Do not use power line other than the one specified. Please use it properly.
Otherwise, it may cause fire or electric shock.
Special Announcement
 This manual is for reference only.
 All the designs and software here are subject to change without prior written
notice.
 All trademarks and registered trademarks are the properties of their respective
owners.
 If there is any uncertainty or controversy, please refer to the final explanation of
us.
 Please visit our website for more information. 

0
1 Overview
The Fingerprint Access Control Integration Host integrates card reading, config and
execution functions. Its has a neat appearance for medium to high-end clients such as
commercial building, corporation and intelligent community.
It has:
 Touch keyboard + LCD display, TCP/IP protocol.
 Support unlock via card, fingerprint, password, card+password, card+fingerprint, card
or password or fingerprint.
 Max support 4,500 fingerprints, 30,000 valid cards and 500 super-passwords.
 Max support 150,000 card records and 512 alarm records.
 Door time out alarm, intrusion alarm, duress alarm, and door sensor alarm.
 Ring input.
 Add guest card, duress card, black/white list and patrol card, while support period of
validity or times.
 Integrate card reader and single-door controller.
 Support 128 groups of period and 128 groups of holiday period.

1
2 Device Structure and Installation
Device appearance and dimension are shown as in Figure 2- 1 and Figure 2- 2.
Unit is mm.
Figure 2- 1
Figure 2- 2

2
Fingerprint Access Control Integration Host installation is shown as in Figure 2- 3.
Figure 2- 3
Installation step:
Step 1. Fix installation bracket in the hole on 86 box via screw A as to fix the bracket on
wall (if no 86 box or you cannot fix it well, then use screw B to fix the bracket on wall,
but you must embed expansion nut at the corresponding position in wall before doing
so).
Step 2. According to installation map, hang the device on bracket hook.

3
3 System Structure
3.1 System Structure
The device and card reader, alarm device, access control PC and etc. compose a system
as in Figure 3- 1.
Figure 3- 1
3.2 Device Port
Device port of the host is shown in Figure 3- 2.

4
Figure 3- 2
No. Port Note
1 COM Door lock COM end
NC Door lock NC end
NO Door lock NO end
SR Door sensor detection
GND Connect to GND
PUSH Press unlock button
2 BELL- Door bell output
BELL+
OUT2- Alarm output 2 （5V level switch ），
connect to voltage not over 12V
OUT2+
OUT1- Alarm output 1（5V level switch）, connec
to voltage not over 12V
OUT1+
3 485+ RS485+, 485 card reader
485- RS485-, 485 card reader
LED LED_OUT, Weigand card reader
D0 D0, Weigand card reader
D1 D1, Weigand card reader
CASE Card reader protection alarm
4 GND Connect to GND
12V 12V power input
485+ RS485+
485- RS485-
GND Connect to GND
ALARM Alarm input

5
4 Function Setting
4.1 Login
Login interface step:
Step 1. Plug in power, device is going to boot up.
Step 2. Press 【√】 button, screen displays admin password.
Step 3. Input admin password, and press 【√】 button to enter homepage.
Default password is “88888888”.
You can select to enter user management, A&C setting, system setting and local
info as main menu.
 Press 【↑】 button to move up.
 Press 【↓】 button to move down.
 Press 【√】 button to enter or confirm.
 Press 【 】 button to return or exit.
 Press 【←】 button to backspace.
 Press 【 】 button to ring.
4.2 User Management
You can add or delete card, password.
You also can add user as you add card or fingerprint, and you can bind card and
fingerprint.
Card type includes general, VIP, guest, patrol, black list and duress.
Please refer to Chart 4- 1.
Card Type Note
General card General user card.
When you add card, system will ask if set card
password, period and term of validity.
VIP card VIP user card. It warns service personal when
cardholder enters.
When you add card, system will ask if set card
password, period and term of validity.
Guest card When you add guest card, you need to set usage times.
So when it exceeds this limit, the card becomes
invalid.
Patrol card Patrol card can only swipe card at patrol spot but

6
Card Type Note
cannot unlock.
When you add card, system will ask if set card
password, period and term of validity.
Black list When you swipe card on black list and enters, it wanrns
service personal.
When you add card, system will ask if set card
password, period and term of validity.
Duress card Duress card becomes valid after you set duress alarm.
You can swipe this card to unlock, but an alarm will be
send to center.
Chart 4- 1
Note:
All of these cards will be sent to center, management platform will process according to
card type.
Password user represents user who input password in setup to enter.
Note:
 Card user has not set password, and you shall set unlock mode to card, card or
password or fingerprint in order to enter.
 Card user set card password, and you shall set unlock mode to card, card +
password, card or password or fingerprint in order to enter.
 Card user set fingerprint, but before entering, user shall set unlock mode to card, card
+ password, card or password or fingerprint.
 User, who set period, can only unlock door within designated period.
 Password user, shall set unlock mode to password, card or password or fingerprint in
order to enter.
4.2.1 Add User
To add user:
Step 1. In homepage, press 【↑】or【↓】 key to select user management, press 【√】
key.
Step 2. Press 【↑】or【↓】 key to move up or down, select add user and press【√】key.