KCT GWB322 User manual

IMPORTANT - Ensure all bolts are secured tightly before use.
User instructions - Please keep for future reference V2.0
160/200L Twin Wheel Barrow
GWB322 | GWB333

10
9
1
11
12 13
14
8
7
6
5
4
32
User instructions - Please keep for future reference
1
5
4
3
2
Plastic Base
2X - Arms
2X - Legs
Leg Brace
2X - Wheels
6
10
9
8
7
Axle
Nose Guard
Front Bracket Plate
Tray Brackets
4X - 45mm Nuts, Washer
& Bolts
11
14
13
12
10X - 75mm Nuts, Washer,
Spring Washer & Bolts
4X - 25mm Nuts, Washer,
Spring Washer & Bolts
2X - Wheel Washer
2X - Split Pin
160/200L Twin Wheel Barrow
GWB322 | GWB333
Imported by:
KCT Leisure
Glebe Farm, Old London
Road, Copdock, Ipswich,
Suffolk, IP83JN
United Kingdom
x10
x10
x10
x4
x4
x4
x4
x4
x4
1.

Attach the nose guard (7) to the
front of the arms using four
45mm (10) nuts and bolts
through the side.
Step 2
Align arms (2) onto the plastic base with the
handles towards to back end.
Place the legs on top of the arms esuring the
leg brace holes face the rear of the base.
Align all the bolt holes and secure both the
legs and arms to the plastic base using four
75mm (11) nuts and bolts.
Step 1
Secure the axle (6) onto the
bottom of the arms at the front
using four 75mm (11) nuts and
bolts.
Slide the wheels (5) onto each
end of the axle.
Step 3
2.

Secure in place using the wheel
washer first (13) and then the
split pin (14).
Insert the split pin into the holes
shown and split the two sides of
the pin where it exits. Repeat for
other wheel.
Step 4
Place the leg brace (4) onto the
back side of the legs.
Line up the holes and fasten in
place using two 25mm (12)
nuts and bolts.
Step 5
Secure the bottom side of the
tray brackets (9) to the legs
using two 75mm (11) nuts and
bolts.
Place the front bracket plate (8)
along with the other ends of the
tray brackets to the plastic base
and secure together using two
25mm (12) nuts and bolts.
Step 6
3.