KE2 Therm Solutions 20906 User manual

© Copyright 2017 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Q.5.26 November 2017
KE2 WiFi Service Tool (pn 20906)
Quick Start Guide
Sample web pages from various controllers
Table of Contents
Kit Contents........................................................... page 2
Product Views ...................................................... page 2
Specications........................................................ page 3
Quick Start: Open Wireless Network............. page 4
Quick Start: Secure Wireless Network .......... page 6
QR Codes to Literature & YouTube Videos .. page 8
The KE2 WiFi Service Tool is the simplest, most cost eective, way to access the Graphical
User Interface (GUI) or web pages of the KE2 Evaporator Eciency, KE2 Evap for Rack
Eciency, or KE2 Controlled Environment.
When connected to the controller, the KE2 WiFi Service Tool creates nearly instant wire-
less access to the controller’s web pages. Users can connect their cellphones, tablets, or
laptop computers to the wireless network.
If used in the secured/KE2 LDA mode, the KE2 WiFi Service Tool provides similar func-
tionality to the KE2 LDA, including Internet access to KE2 SmartAccess for remote moni-
toring, control, and alarm notications.

KE2 WiFi Service Tool
Quick Start Guide
© Copyright 2017 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Q.5.26 November 2017
Page 2
Product Views
thermsolutions
Power WiFi
Status Indicator Bar
WAN LAN 3G/4G
PWR WAN LAN WiFi 3G/4G
WAN
RJ-45 Ethernet Ports
WAN Port - Access
to the Internet
LAN
LAN Port - Access
to Local Network
POWER
Connect to Power
Supply
TF CARD
SIM CARD
RESET
USB2.0
Access to the TF Card
or the SIM Card
USB Port
Can be used to supply
external power.
i.e. charging mobile phone
Returns the service tool
to factory settings
ON /OFF
ON/OFF
Controllers already integrated into a customer network, will have
had their IP addresses changed, and should be connected to the
KE2 WiFi Service Tool’s WAN port, to prevent network disruption.
KE2 WiFi Service Tool Kit (pn 20906) includes the WiFi ServiceTool & Accessories
Power Plug USB CableKE2 WiFi Service Tool RJ-45 Ethernet Cable
The KE2 WiFi Service Tool’s LAN port should only be connected to
individual or groups of KE2 Therm Ethernet enabled controllers with
their factory programmed IP address(es). Also, they should only
be connected to KE2 Therm’s Refrigeration Network, and should not
be connected to a controller, or group of controllers, integrated into
the customer’s existing network. The existence of multiple DHCP
Servers can result in temporary network disruption.

Q.5.26 November 2017
Page 3
KE2 WiFi Service Tool
Quick Start Guide
Specications
© Copyright 2017 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Power Supply
With the onboard battery, the KE2 WiFi Service Tool
provides hours of operation. The included USB cable
may also be plugged into the 120V adapter for extended
access.
thermsolutions
PWR WAN LAN WiFi 3G/4G
Hardware Specications
Protocol Standards
Using IEEE 802.11n technology;
IEEE 802.11g, IEEE 802.11b;
IEEE 802.3, IEEE 802.3u
Wireless Rate 150Mbps
Interface
2 10/100M adaptive LAN / WAN port supports auto-ip (Auto MDI / MDIX)
A USB 2.0 interface
A Micro USB charging port
Push button Power switch
Reset button
LED System status indication
Battery indicator
Size 4.1 in x 2.8 in x 1.0 in ; 104 mm x 71mm x 25mm (L x W x H)
Radio Parameters
Operating Mode AP (wireless AP) mode;
Other
Packing Accessories
KE2 WiFi Service Tool;
USB cable;
120/240V power switching transformer;
User Manual;
Environment Operating temperature: 59°F to 104°F (15°C to 40°C);
Storage temperature: -4°F to 122°F (-20°C to 50°C)

KE2 WiFi Service Tool
Quick Start Guide
© Copyright 2017 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Q.5.26 November 2017
Page 4
thermsolutions
ENTER
BACK
®
Efficiency
Evaporator
Pressand hold for
manualdefrost
24-hour
Emergency Technical Support
1.888.337.3358
thermsolutions
PWR WIFILANWAN 3G/4G
LAN Port
5Click Connect
2Using the power button, turn ON the device.
3Connect to the KE2 WIFI Service Tool, click the
wireless connection icon , typically found in
the bottom right hand corner of the computer
screen. It will open a small window with a list of
available networks.
There are 2 wireless networks available:
a. KE2WIFIST – wireless network is Open,
and no password is required.
b. KE2LDA – wireless network is Secure, and
requires the password provided on the
label.
ON/OFF
2
1Using the RJ-45 cable (included with the
KE2 WiFi Service Tool), connect the KE2 WiFi
Service Tool to the controller.
4Select the KE2WIFIST wireless network.
3
4
5
Quick Start: OPEN Wireless Network

Q.5.26 November 2017
Page 5
© Copyright 2017 KE2 Therm Solutions, Inc., Washington, Missouri 63090
KE2 WiFi Service Tool
Quick Start Guide
8The browser will display the control-
ler’s home screen (MasterView).
6Once connected to the device, launch the
browser of your preference, i.e. Google Chrome,
Mozilla Firefox, Apple Safari etc.
7
8
7Navigate to one of the following ad-
dresses, 192.168.50.1 or https://ke2lda.
”
Click on the Endpoint for the control-
ler you would like to view.
Notes:
If you are familiar with KE2 Therm’s
KE2 LDA, you will notice there is no
link to access the Management
Console. This is only available when
connected to the KE2 LDA wireless
network.
When connected to the KE2WIFIST
wireless network, the WAN port will
not provide Internet/Network ac-
cess, even if connected.
Dashboard is Not limited to 10 con-
trollers. This makes the tool easy to
use for any size installation.

KE2 WiFi Service Tool
Quick Start Guide
© Copyright 2017 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Q.5.26 November 2017
Page 6
thermsolutions
ENTER
BACK
®
Efficiency
Evaporator
Pressand hold for
manualdefrost
24-hour
Emergency Technical Support
1.888.337.3358
thermsolutions
PWR WIFILANWAN 3G/4G
LAN Port
5Click Connect
2Using the power button, turn ON the device.
3Connect to the KE2 WIFI Service Tool, click the
wireless connection icon , typically found in
the bottom right hand corner of the computer
screen. It will open a small window with a list of
available networks.
There are 2 wireless networks available:
a. KE2WIFIST – wireless network is Open,
and no password is required.
b. KE2LDA – wireless network is Secure and
requires the password provided on the
label.
ON/OFF
2
1Using the RJ-45 cable (included with the KE2
WiFi Service Tool), connect the KE2 WiFi Service
Tool to the controller.
4Select the KE2LDA wireless network.
3
4
5
Quick Start: SECURE Wireless Network

Q.5.26 November 2017
Page 7
© Copyright 2017 KE2 Therm Solutions, Inc., Washington, Missouri 63090
KE2 WiFi Service Tool
Quick Start Guide
9The browser will display the controller’s
home screen (MasterView).
7Once connected to the device, launch the
browser of your preference, i.e. Google
Chrome, Mozilla Firefox, Apple Safari etc.
8
9
8Navigate to one of the following address-
es, 192.168.50.1 or https://ke2lda. ”
Click on the Endpoint for the controller
you would like to view.
Notes:
The secured wireless network has capa-
bilities similar to the KE2 LDA.
6Enter the Wi-Fi password supplied on the
KE2 WiFi label to access the KE2 LDA wire-
less network.
Advanced Features
The KE2 WiFi Service Tool is able to connect
to network attached controllers. (Needs
to be connected to DHCP server on same
network as controllers).
MAC: E1:2F:G3:4H:J5:6K
WI-FI ESSID: KE2WIFI-4HJ56K
Secure WI-FI ESSID: KE2LDA-4HJ56K
WI-FI PW: D5432XRZ
MGMT LOGIN: ke2admin
MGMT PW: ke2admin
http://ke2wist or IP: 192 .168 . 50 . 1
Serial #:
16197-251 Power: 5V-1A
Wi Password
6

KE2 WiFi Service Tool
Quick Start Guide
© Copyright 2017 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Q.5.26 November 2017 supersedes Q.5.26 August 2013 and all prior publications
Q.5.26 November 2017
Page 8
KE2 Therm Solutions
12 Chamber Drive. Washington, MO 63090
1-888-337-3358 . www.ke2therm.com
Please visit
youtube.com/ke2therm for videos that
provide additional information on:
Video 048 to Video 052
What information is on the KE2 Evap Web pages
Video 061
What information is on the KE2 LDA’s Dashboard and Manage-
ment Console
Related Information
Q.1.19 KE2 Evaporator Eciency MasterView Screens
Accessing the web page of a KE2 EvaporatorEcienc y controllerreveals a great deal of
information about the system performance, setpoints and allowsfor quick adjustments.
While this information is also available using the user interface of the controller, when
networked, the controller’s information can be accessed, reviewed,and changed from
anywhere there is network access.
KE2 MasterView
Overview
KE2 EvaporatorEfficiency
TM
thermsolutions
ENTER
BACK
Q.1.19 April 2015
© Copyright 2015 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Q.1.28 KE2 Controlled Environment MasterView Screens
KE2 ControlledEnvironment
MasterView Screens
Accessingthe web page of a KE2 Controlled Environment controller revealsa great deal of
information about the system performance, setpoints and allowsfor quick adjustments.
While most information is also available using the user interface of the controller,when
networked, the controller’s information can be accessed, reviewed,and changed from
anywhere there is network access.
Q.1.28 October 2014
© Copyright 2014 KE2 Therm Solutions, Inc., Washington, Missouri 63090
Wine Cellar 2
The web page of a KE2 Evap for Rack Eciency controller reveals a greatdeal of information
aboutsystem performance, setpoints, and allows for quick adjustments. While this information
is also available using the user interface of the controller, when networked, the controller’s
information can be accessed,reviewed, and changed locally or remotely.
KE2 Evap for Rack Efficiency (pn21096)
MasterView Screens
Q.1.38 November 2015
© Copyright 2015 KE2 Therm Solutions, Inc., Washington, Missouri 63090
KE2 Therm Solutions, Inc. . 12 Chamber Drive . Washington, MO 63090
636.266.0140 . www.ke2therm.com
Q.1.38 KE2 Evap for Rack Eciency Master View Screens
Bulletins Videos
For detailed information on the Master View screens, see
the following bulletin(s) or view our YouTube videos.