kebrico 630036 User manual

Kebrico Limited
Walker House
Skippers Lane
Skippers Lane Industrial Estate
Middlesbrough
TS6 6HA
Telephone: [phone]
www.kebrico.co.uk
[e-mail]
Should you encounter any difficulties, or require assistance, please contact:
PLEASE RETAIN OUR ADDRESS FOR FUTURE REFERENCE
KK/SS/MAY15
SSS (SAFE STURDY STORAGE)
630036, 630046 & 630049
PLINTH ASSEMBLY
INSTRUCTIONS
Please fit the Minifix studs (MS), Minifix cams (MC),
and Dowels (D) in the relevant holes as shown in
the pictures before assembly.

CONTENTS
COMPONENTS
When fitting the Minifix cams (MC) please ensure the
arrows on the Minifix cams (MC) are pointing to the outer
edge holes.
Please be careful when tapping in the dowels.
MINIFIX STUD (MS)
X4 MINIFIX CAM (MC) X4 DOWEL (D)
X4 WOODSCREW X12
BRACKET
X6
A
B
LONG PINTH PANEL
X2
SMALL PINTH PANEL
X2
MS MS
MC MC
D D
ASSEMBLY
1. Align the minifix studs in a long
plinth panel (A) to the outer edge
holes in the 2 small plinth panels
(B), press down and turn the
minifix cams clockwise to lock in
place.
2. Align the minifix studs in the
remaining long plinth panel (A) to
the outer edge holes in the 2 small
plinth panels (B), press down and
turn the minifix cams clockwise to
lock in place.
3. Align the brackets on the
assemble plinth to the pilot holes
on the underside of the base
panel, secure in place using 6
woodscrews.
↓↓↓