Keeler TonoCare 2.0 User manual

1. Position the forehead rest
on the patient’s forehead.
2. Look through the viewnder
and align the positioning circle
concentrically to the patient’s iris.
3. Adjust the forehead rest until the
X ts the box and the TonoCare
will do the rest.
TonoCare 2.0
Three step guide
Centre
on pupil
Good
reading
Bad
reading
POSITIONING
CIRCLE
ALSO CHECK OUT THE TONOCARE TRAINING VIDEO ON THE KEELER WEBSITE
**
Keeler Tonocare A5 2pp Quick Start Guide EP59-30881 0219 ARTWORK.indd 1 20/02/2019 15:18

Charge your TonoCare for a
minimum of 12 hours before
using it for the rst time.
Perform a monthly 12 hour
charge of your TonoCare to
ensure optimum battery life.
Refer to the IFU for full
instructions on how to use
your TonoCare.
Navigating the User Menu
• With the unit switched on, press and
hold the menu button to enter the
user menu.
• Scroll through the options using the
print and return buttons.
• Short press the menu button to select
an option and change it using the
print or return buttons.
• Short press the menu button to return
to the user menu.
• Press and hold the menu button to
return to the measurement screen.
On/Standby button Light Turn on/off illumination LEDs
Sound Turn on/off audible alerts
Time Set the system time
Date Set the system date
IOP Format Select the IOP format (XX/XX.X)
Self Test
Brightness
Pachymetry options (OFF/ON/TRIGGER)
(If set to ‘TRIGGER’, the pachymetry option only
appears if the measured IOP value is greater than 15)
Set the brightness for the displays
(value between 1 and 15)
Initiate a self-test
of the system
Menu button
Return button
Manual trigger
OD/OS button
Print button
Pachymetry
Device Controls User Menu Description
Bad or invalid
readings
LOW
PITCH
Valid set of
measurements
obtained
Sounds
TonoCare 2.0
Quick Start
HIGH
PITCH
www.keeler.co.uk
www.keelerusa.com
EP59-30881 Issue D
Keeler Tonocare A5 2pp Quick Start Guide EP59-30881 0219 ARTWORK.indd 2 20/02/2019 15:18