Kelkay EasyFountain 45123L User manual

www.kelkay.com

Thank you for purchasing
your Kelkay easyfountain®

Introduction
Aftersales helpline: 01405 864994
Thank you for purchasing your
water feature from the UK’s best
selling easyfountain® brand. By
doing so you now have assurance
and peace of mind. This product
has been manufactured to the
highest standards of performance
and safety.
We hope you will enjoy your
purchase for many years to
come. If you require technical
support or in the unlikely event
that you encounter a problem
with your fountain, please refer
to the troubleshooting guide
provided in this leaet or
telephone our helpline for
assistance.
Please read this user guide
thoroughly before use and
retain for future reference.
Introduction
Your easyfountain®
Parts
Assembly Instructions
Troubleshooting
Warranty conditions
Maintenance and care
Proof of purchase record
Contents
AFTERSALES | helpline: 01405 864994 | email: [e-mail] | www.kelkay.com
In the unlikely event that you need to report an
issue contact our helpline direct before returning
your product to store.

Proof of purchase
Name:
Address:
Tel:
Email:
Date of purchase:
Location of purchase:
Aftersales helpline: 01405 864994
Email: [e-mail]
Oce hours: 10am - 4pm (Monday - Friday)
Your details
Kelkay contact details
ATTACH PROOF OF PURCHASE HERE
AFTERSALES | helpline: 01405 864994 | email: [e-mail] | www.kelkay.com

Maintenance and care
• Clean and top-up the water on a regular basis.
• To empty the fountain of water for cleaning or for winter care:
Smaller fountains (that are light enough to be lifted) the water
can be emptied by simply inverting the fountain and letting the
water pour away through a suitable drain or sink.
Larger (heavier) fountains - water can be removed by using a
large sponge or by purchasing a simple syphon pipe available
from aquatic supply stores.
• Always shut o the power before cleaning and maintaining the
fountain or pump.
Cleaning your fountain
Caring for your fountain
The easyfountain®aftercare range includes products to help care for
your fountain. Please see the table below for more information:
4597 - Fountain Algae Stopper 385g
• easy to use
• removes and prevents algae and bacteria
• will not harm animals and birds
4594 - Fountain Citronella Water Scent 125ml
• easy to use
• clean and fresh scent
• helps to repel insects
4592 - Fountain Shine Spray 500ml
• easy to use
• helps preserve radiance
• leaves a smear free shine
Please note: the easyfountain®aftercare range
is only available in the UK and Republic of Ireland.
Please check with your nearest stockist for availability.
4595 - Fountain Grime and Lime Cleaner 500ml
• easy to use
• removes dirt from your water feature
• limescale buster
4596 - Fountain One Shot Algae Remover 100g
• easy to use
• removes algae and bacteria
• stops slime build up
AFTERSALES | helpline: 01405 864994 | email: [e-mail] | www.kelkay.com

Your easyfountain®
Product code: 45123L
Includes L.E.D. light (s)
Height: 698mm
Width: 381mm
Depth: 381mm
Vortex Sphere
AFTERSALES | helpline: 01405 864994 | email: [e-mail] | www.kelkay.com

*Actual pump and transformer
may dier from images shown
Parts
Please read before
unpacking your fountain
Unpack with care on to a smooth
surface to avoid scratching.
Check for any parts that may be
hidden within the packaging.
Refer to the assembly instructions
to set up your fountain. Retain
your purchase receipt and
attach to this leaet. In the event
a pump or light is replaced
under warranty, the below part
numbers will not apply.
Parts List:
1. Fountain Part x 1
2. Fountain Part x 1
2. Transformer x 1
3. Pump x 1
1.
2.
3.
4.
Electrical Safety
The transformer should never be submerged or
stood in water. Please note the transformer will
get hot while in use, this is normal.
If outdoors the outlet must be waterproof to IP66
standard. We recommend the use of a residual
current device (GFI) Ground Fault Interrupter
(available from all good D.I.Y. stores) when
connecting the fountain to the electric supply.
Replacement Parts Available
Pump Code: SP650
Lights Code: SL401
Replacement parts may not necessarily be
identical to the original parts and may require an
additional plug.
IMPORTANT INFORMATION
ring lock
AFTERSALES | helpline: 01405 864994 | email: [e-mail] | www.kelkay.com

Warranty conditions
Safety
The fountain or part is NOT covered
under warranty in the following cases:
• Swelling or blistering on the casing of the pump.
• Pump smells of a burning residue.
• Discolouring that looks like rust.
• If the pump has a visible algae or limescale build up.
• Any damage to the plug or moulded inserts.
If any of the above is noticeable the pump will more than likely
not have been maintained correctly. The warranty is void. Do not
dispose of the pump in the case of further inspection requested
from Kelkay LTD. A new pump can be purchased from Kelkay LTD.
• The transformer has a visible build up of dirt and/or debris.
If any of the above is noticeable the warranty is void. Do not
dispose of the transformer in the case of further inspection
requested from Kelkay LTD.
• Products damaged by misuse or severe weather conditions.
• Products that have formed cracks / leaks not reported within
28 days from purchase.
• Paint and/or surface damage/discolouration due to limescale.
AFTERSALES | helpline: 01405 864994 | email: [e-mail] | www.kelkay.com

Warranty conditions
Safety
Establish if the product is under warranty
• Please be aware Kelkay will ask for proof of purchase.
• If proof of purchase is not available or the product is out of
the warranty period, a replacement part can be purchased.
• If it has a crack or leak and has been reported within 28 days
from purchase it is under warranty and should be returned
complete with electrics and accessories in the original packaging.
• If the paint on the fountain has peeled during normal use and
the winter care procedure has been followed, it is under warranty.
• If the fountain has been delivered damaged it must be reported
straight away for this to be covered by the warranty.
• If the proof of purchase shows the product was bought within
1 year, a free of charge replacement part can be supplied.
• Please be aware Kelkay will ask for proof of purchase.
• Contact Kelkay by phone or email
• You will be required to provide the following information:
- Your contact details - name, address, contact number, email.
- Replacement part detail or part number required.
• If proof of purchase is not available or the product is out of
the warranty period, a replacement part can be purchased.
AFTERSALES | helpline: 01405 864994 | email: [e-mail] | www.kelkay.com

Assembly Instructions
PUMP FLOW: The pump ow can be adjusted
with the regulator, this is found on the inlet of
the pump. We recommend starting with the
ow regulator fully open and then adjusting
down if required.
Connect the tubing to the outlet
of the pump and place it in the
water reservoir at the bottom of
the bucket.
Connect the two ends of the L.E.D.
lighting wires together and screw
over the plastic collar. Push the cable
with two pins into the transformer
and screw over the plastic collar.
32
AFTERSALES | helpline: 01405 864994 | email: [e-mail] | www.kelkay.com
Reach inside the bottom bucket of
the fountain pulling out the tubing/
water pipe and internal L.E.D.
cable(s)
1
Carefully ll the fountain with
sucient water ensuring the pump
is fully submerged. Connect the plug
from the transformer to your mains
outlet.
6
Locate the top part of the fountain
onto the base.
45
Place the pump and excess wires
into the access cavity ensuring that
the long pump wires extend out
through the opening.

Troubleshooting
Troubleshooting
Winter care
Guidelines to help protect your easyfountain®:
• If possible, bring your water feature indoors eg. garage or shed
• Drain the fountain of all water. If water freezes within the fountain,
this can cause damage.
• If your fountain is left outside and drained of all water, a Kelkay
easyfountain®cover can be purchased to cover the entire
fountain however we cannot guarantee that it will protect your
fountain from winter damage.
Pumps
• Check the water is covering the pump by at least 5cm.
• Check the ow dial on the pump to ensure the correct “ow”
for the fountain is set.
• Check to see if it is running if it is then it is probably blocked.
• Clear the pipe and impeller from blockages.
• Check the fuse in the plug.
Lights/Transformers
• If the lights and the pump are not working it is likely the
transformer has failed. If the product is within the warranty
period and misuse has not occurred a replacement part
can be issued providing a proof of purchase is supplied.
Troubleshooting
AFTERSALES | helpline: 01405 864994 | email: [e-mail] | www.kelkay.com

Troubleshooting
• Flickering lights are caused by a build-up of
algae and lime scale on the connectors between the
transformer and the lights. This is not covered by the warranty.
Replacement parts can be purchased from Kelkay LTD.
• If the lights stop working they are available to purchase from
Kelkay LTD. Light bulbs are not covered under the warranty.
Leaks/Loss of Water
• Overlled - make sure the water reservoir is not overlled.
Remove water if necessary.
• Pump Flow Rate - check the pump and reduce the ow rate
if required.
• Level - ensure the fountain is completely level.
• Natural evaporation, weather elements and wildlife will also
aect the fountain water level on a daily basis. Top up your
fountain as required.
Main Body & Paintwork
• Do not confuse limescale residue with fading paint - this is not a
fault and in most cases the fountain needs cleaning.
• Paint peeling will occur if the fountain has been left outside in
the frost and will not be covered by the warranty.
• Parts broken o the main body while in use are usually caused
by bad weather conditions and not covered by the warranty.
AFTERSALES | helpline: 01405 864994 | email: [e-mail] | www.kelkay.com