Kelly KHB Series User manual

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Kelly KHB
High Power Brushless
Motor Controller User’s Manual
Devices Supported:
KHB72601
KHB12101
KHB72701
KHB14201
KHB72101
KHB14301
KHB12151
KHB14401
KHB12201
KHB14601
KHB12251
KHB12301
KHB12401
KHB12601
KHB12801
Rev.4.5
Dec. 2016

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 1
Contents
Chapter1 Introduction.........................................................................................2
1.1 Overview...................................................................................................2
Chapter 2 Features and Specifications...............................................................3
2.1 General functions......................................................................................3
2.2 Features....................................................................................................4
2.3 Specifications............................................................................................5
2.4 Naming Regulations................................................................................. 5
Chapter 3 Wiring and Installation........................................................................6
3.1 Mounting the Controller.............................................................................6
3.2 Connections............................................................................................. 8
3.2.1 Front Panel and back panel of KHB Motor Controller:........................ 8
3.2.2 Wiring of KHB Motor Controller.......................................................... 12
3.3 Communication Port............................................................................... 13
3.4 Installation Check List.............................................................................13
Chapter 4 Maintenance.....................................................................................14
4.1 Cleaning................................................................................................. 14
4.2 Configuration.......................................................................................... 14
Table 1: LED CODES.......................................................................................... 15
Contact Us:......................................................................................................... 17

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 2
Chapter 1 Introduction
1.1 Overview
This manual introduces the Kelly high power BLDC motor controllers’features, their
installation and their maintenance. Read the manual carefully and thoroughly before using
the controller. If you have any questions, please contact the support center of Kelly Controls.
Kelly’s programmable motor controllers provide high efficient, smooth and quiet controls
for electric motorcycles, forklifts, hybrid vehicles, electric vehicles and electric boats, as well as
industrial motor speed or torque control. It uses high power MOSFET’s and, PWM to achieve
efficiencies of up to 99% in most cases. A powerful microprocessor brings in comprehensive
and precise control to the controllers. It also allows users to adjust parameters, conduct
tests,and obtain diagnostic information quickly and easily.

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 3
Chapter 2 Features and Specifications
2.1 General functions
(1) Extended fault detection and protection. The LED flashing pattern indicates the fault
sources. Green LED indicates normal operation. Controller will shut down in some fault
conditions.
(2) Monitoring battery voltage. It will stop driving if the battery voltage is too high and it will
progressively cut back motor drive power as battery voltage drops until it cuts out altogether
at the preset “Low Battery Voltage”setting.
(3) Built-in current loop and over current protection.
(4) Configurable motor temperature protection range.
(5) Current cutback at low temperature and high temperature to protect battery and controller.
The current begins to ramp down at 90℃case temperature, shutting down at 100℃.
(6) Enhanced regen brake function. A novel ABS technique provides powerful and smooth
regen.
(7) The controller keeps monitoring battery recharging voltage during regenerative braking,
progressively cutting back current as battery voltage rises then cutting off regen altogether
when voltage goes too high.
(8) Pulsed reverse alarm output.
(9) 3 switch inputs which are activated by connection to Ground. Default to throttle switch, brake
switch and reversing switch.
(10) 3 analog 0-5V inputs that default to throttle input, brake input and motor temperature input.
(11) Provision of a +5 volt output to supply various kinds of sensors, including Hall effect type.
(12) Main contactor driver. Cutting off the power if any fault is detected.
(13) Current meter to display both drive and regen current. Save shunt.
(14) 3 hall position sensor inputs. Open collector, pull up provided.
(15) Maximum reverse speed is configurable to half of max forward speed.
(16) Configurable and programmable with a host computer though RS232 or USB. Provide free
GUI which can run on Windows XP/2000, Windows 7 and Vista(recommend using Kelly
Standard USB To RS232 Converter).
(17) Configurable boost switch. Enables the maximum output power achievable if the switch is
turned on.
(18) Configurable economy switch. Limits the maximum current to half if the switch is turned on.
(19) Maximum reverse power is configurable to half power.
(20) Configurable 12V brake signal input, in lieu of motor temperature sensor.
(21) Optional joystick throttle. A bi-symmetrical 0-5V signal for both forwarding and reversing
(22) Configurable motor over-temperature detection and protection with the recommended
thermistor KTY84-130.
(23)Optional CAN bus.
(24)Supply voltage 8V-30V
Caution! Regeneration has braking effect but does not replace the function of a mechanical
brake. A mechanical brake is required to stop your vehicle. Regen IS NOT a safety feature!
Controller may stop regen, without warning, to protect itself or the battery(it won’t protect you!).

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 4
2.2 Features
1) Opto-isolated technology achieve stability.
2) Intelligence with powerful microprocessor.
3) Synchronous rectification, ultra low drop and fast PWM to achieve very high efficiency.
4) Electronic reversing.
5) Voltage monitoring on 3 motor phases, bus, and power supply.
6) Voltage monitoring on voltage source 12V and 5V.
7) Current sense on all 3 motor phases.
8) Current control loop.
9) Hardware over current protection.
10) Hardware over voltage protection.
11) Support torque mode, speed mode, and balanced mode operation.
12) Configurable limit for motor current and battery current.
13) Low EMC.
14) LED fault code.
15) Battery protection: current cutback, warning and shutdown at configurable high and low
battery voltage.
16) Rugged aluminum housing for maximum heat dissipation and harsh environment. Support
fan or water cooling.
17) Rugged high current terminals, and rugged aviation connectors for small signal.
18) Thermal protection: current cut back, warning and shutdown at high temperature.
19) Configurable 60 degree or 120 degree hall position sensors.
20) Support motors with any number of poles. Up to 40,000 electric RPM standard. Optional
high speed 70,000 ERPM, and ultra high speed 100,000 ERPM.
(Electric RPM = mechanical RPM * motor pole pairs).
21) Support three modes of regenerative braking: brake switch regen, release throttle regen,
0-5K or 0-5V analog signal variable regen for KHB and HP controllers.
22)Configurable high pedal protection: the controller will not work if high throttle is detected at
power on.
23) Current multiplication: Take less current from battery, output more current to motor.
24) Easy installation: 2 or 3-wire pot, or hall sensor throttle can work with KHB and HIP
controllers.
25) Remote fault code LED driver.
26) Current meter output.
27) Standard PC/Laptop computer is used to do programming. No special tools needed.
28) User program provided. Easy to use. No cost to customers.

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 5
2.3 Specifications
(1) Frequency of Operation: 16.6kHz.
(2) Standby Battery Current depending on the model: usually less than 2mA.
(3) 5V Sensor Supply Current: 40mA.
(4) Controller supply voltage range, PWR, 8 to 30V (24V preferred)
(5) Controller input power, PWR: less than 10W.
(6) Configurable battery voltage range, B+. Max operating range: 18V to 136V for controller
rated equal 120V. 18V to 180V for controller rated equal 144V.
(7) Standard Throttle Input: 0-5 Volts(3-wire resistive pot), 1-4 Volts(hall active throttle).
(8) Analog Brake and Throttle Input: 0-5 Volts. Producing 0-5V signal with 3-wire pot.
(9) Reverse Alarm, Main Contactor Coil Driver, Meter.
(10) Full Power Operating Temperature Range: 0℃to 50℃(controller case temperature).
(11) Operating Temperature Range:-30 ℃to 90 ℃,100 ℃shutdown(controller case
temperature).
(12) Motor Current Limit, 1 minute: 150A - 1000A, depending on the model.
(13) Motor Current Limit, continuous: 75A - 500A, depending on the model.
(14) Max Battery Current : Configurable..
2.4 Naming Regulations
The naming regulations of Kelly KHB BLDC motor controllers:

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 6
Chapter 3 Wiring and Installation
3.1 Mounting the Controller
The controller can be oriented in any position which should be as clean and dry as possible,
and if necessary, shielded with a cover to protect it from water and contaminants.
To ensure full rated output power, the controller should be fastened to a clean, flat metal
surface with six screws. Applying silicon grease or some other thermal conductive material to
contact surface will enhance thermal performance.
Proper heat sinking and airflow are vital to achieve the full power capability of the controller.
The case outline and mounting holes’ dimensions of KHB Controllers:
Height: 84 millimeters
Length: 218 millimeters
Figure 1: KHB mounting holes’ dimensions (dimensions in millimeters)
Controller models with above dimension: KHB12151, KHB12201, KHB12251
KHB12301, KHB12401
KHB14201，KHB72601

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 7
Height: 84 millimeters
Length: 286 millimeters
Figure 2: KHB mounting holes’ dimensions (dimensions in millimeters)
Controller models with above dimension: KHB72701, KHB72101
KHB12601, KHB12801
KHB14301, KHB14401

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 8
Height: 84 millimeters
Length: 328 millimeters
Figure 3: KHB mounting holes’ dimensions (dimensions in millimeters)
Controller models with above dimension: KHB14601，KHB12101

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 9
3.2 Connections
3.2.1 Front Panel and back panel of KHB Motor Controller:
Five metal bars in front panel and two plugs (J1, J2) in back panel are provided for
connecting to the battery, motor and control signals shown as Figure 4,6 and 8.
Figure 4: Front panel of KHB motor controller
B+: battery positive
B-: battery negative
A/U: Output A/U phase
B/V: Output B/V phase
C/W: Output C/W phase
Figure 5: Front panel of KHB14601, KHB12101 motor controller

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 10
Figure 6: Back panel of KHB motor controller
Figure 7: Back panel of KHB14601, KHB12101 motor controller

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 11
Figure 8: The connecting diagram of J1 and J2
J1 Pin Definition
1- PWR: Controller power supply (output).
2- Current meter. <200mA
3- Main contactor driver. <2A
4- Alarm: To drive reverse beeper. <200mA
5- RTN: Signal return
6- Green LED: Running indication
7- RTN: Signal return
8- Reserved
9- Boost Switch (only available on the controller with 32-bit micro)
10- CAN bus high
11- CAN bus low
12- 12V brake
13- RTN: Signal return, or power supply return
14- Red LED: Fault code.
J2 Pin Definition
1- PWR: Controller power supply (input)
2- RTN: Signal return, or power supply return
3- RTN: Signal return
4- Motor temperature input.
5- Throttle analog input, 0-5V
6- Brake analog input, 0-5V
7- 5V: 5V supply output. <40mA
8- Micro_SW: Throttle switch input
9- Reversing switch input
10- Brake switch input
11- Hall phase C
12- Hall phase B
13- Hall phase A
14- RTN: Signal return
Notes:
1. All RTN and GND pins are internally connected, but isolated from B-.
2. Two PWR pins, J1-1 and J2-1, are internally connected. It’s recommended to use J1-1
to supply peripherals like alarm and contactor. Twist peripheral wires with PWR is the
preferred for EMC.
3. Kelly Ammeter positive connect to 5V power supply of controller, negative to J1-2.
4. Switch to ground is active. Open switch is inactive.

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 12
3.2.2 Wiring of KHB Motor Controller
Figure 9: Standard Wiring for KHB Controllers
(12V or 24V battery supply is required)

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 13
3.3 Communication Port
A RS232 port is provided to communicate with host computer for calibration and configuration.
Figure 10: standard RS232 Interface
3.4 Installation Check List
Before operating the vehicle, complete the following checkout procedures. Use LED code
as a reference as listed in Table 1.
Caution:
•Put the vehicle up on blocks to get the drive wheels off the ground before beginning these
tests.
•Do not allow anyone to stand directly in front of or behind the vehicle during the checkout.
•Make sure the PWR switch and the brake is off
•Use well-insulated tools.
•Make sure the wire is connected correctly
•Turn on the PWR switch, the Red flashes once and the Green is off. After the start-up
delay, normally the Red will stay off and the Green will turn on. If there is error, the Red
LED will flashes for fault codes.
If the S/N less: 11xxxxxx: Turn on the PWR switch, the Red flashes once and the Green
is on. Normally, the Red will stay off. If there is error, the Red LED will flashes for fault
codes.
•The fault code will be detected automatically at restart.
•With the brake switch open, select a direction and operate the throttle. The motor should
spin in the selected direction. Verify wiring or voltage and the fuse if it does not. The motor
should run faster with increasing throttle. If not, refer to the Table 1 LED code, and correct
the fault as determined by the fault code.
•Take the vehicle off the blocks and drive it in a clear area. It should have smooth
acceleration and good power.

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 14
Chapter 4 Maintenance
There are no user-serviceable parts inside the controllers. Do not attempt to open the
controller as this will void your warranty. However, periodic, exterior cleaning of the controller
should be carried out.
The controller is a high powered device. When working with any battery powered vehicle,
proper safety precautions should be taken that include, but are not limited to, proper training,
wearing eye protection, avoidance of loose clothing, hair and jewelry. Always use insulated
tools.
4.1 Cleaning
Although the controller requires virtually no maintenance after properly installation, the following
minor maintenance is recommended in certain applications.
•Remove power by disconnecting the battery, starting with battery positive.
•Discharge the capacitors in the controller by connecting a load (such as a contactor coil,
resistor or a horn) across the controller’s B+ and B- terminals.
Remove any dirt or corrosion from the bus bar area. The controller should be wiped down
with a moist rag. Make sure that the controller is dry before reconnecting the battery.
Make sure the connections to the bus bars, if fitted, are tight. To avoid physically stressing
the bus bars use two, well-insulated wrenches.
4.2 Configuration
You can configure the controller with a host computer through either an RS232 or USB port.
Disconnect motor wiring from controller.
Do not connect B+, throttle and so on. The controller may display fault code in some
conditions, but it doesn't affect programming or configuration.
Use a straight through RS232 cable or Kelly USB To RS232 Converter to connect to a host
computer. Provide 10V-30V (either J2 pin1 or J1 pin1) to PWR. Wire power supply return to
any RTN pin, isolated from B-.
Download the free configuration software from：
http://www.kellycontroller.com/support.php
Caution:
•Make certain that the motor is disconnected before trying to run the Configuration
Software!
•Configuration software will be regularly updated and published on the website. Please
Update your Configuration Software regularly. You must uninstall the older version
before updating.
•When setting "Hall Sensor Type" in GUI, do not use "Auto-Check". This has been
deleted from the newer configuration software versions.

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 15
Table 1: LED CODES
Green LED Codes
LED Code
Explanation
Solution
Green Off
No power or
switched off
1. Check if all wires are correct.
2. Check fuse and power supply.
Green On
Normal operation
That’s great! You got solution!
Green & Red are both
On
1. Software still upgrading.
2. Supply voltage too low or battery too high
3. The controller is damaged. Contact Kelly about a
warranty repair.
Red LED Codes
LED Code
Explanation
Solution
1,2
¤ ¤¤
Over voltage error
1. Battery voltage is too high for the controller.
Check battery volts and configuration.
2. Regeneration over-voltage. Controller will have
cut back or stopped regen.
3. This only accurate to ±2% upon Overvoltage
setting.
1,3
¤ ¤¤¤
Low voltage error
1. The controller will clear after 5 seconds if battery
volts returns to normal.
2. Check battery volts & recharge if required.
1,4
¤ ¤¤¤¤
Over temperature
warning
1. Controller case temperature is above 90℃.
Current will be limited. Reduce controller loading
or switch Off until controller cools down.
2. Clean or improve heatsink or fan.
2,1
¤¤ ¤
Motor did not start
Motor did not reach 25 electrical RPM within 2
seconds of start-up. Hall sensor or phase wiring
problem.
2,2
¤¤ ¤¤
Internal voltage fault
1. Measure that B+ & PWR are correct when
measured to B- or RTN.
2. There may be excessive load on the +5V supply
caused by too low a value of Regen or throttle
potentiometers or incorrect wiring.
3. Controller is damaged. Contact Kelly about a
warranty repair.
2,3
¤¤ ¤¤¤
Over temperature
The controller temperature has exceeded 100℃. The
controller will be stopped but will restart when
temperature falls below 80℃.
2,4
¤¤ ¤¤¤¤
Throttle error at
power-up
1. Throttle signal is higher than the preset ‘dead
zone’ at Power On. Fault clears when throttle is

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 16
released.
2. Set throttle model as "Hall Active" throttle in GUI if
you use that throttle model.
3,1
¤¤¤ ¤
Frequent reset
May be caused by over-voltage, bad motor
intermittent earthing problem, bad wiring, etc.
3,2
¤¤¤ ¤¤
Internal reset
May be caused by some transient fault condition like
a temporary over-current, momentarily high or low
battery voltage. This can happen during normal
operation.
3,3
¤¤¤ ¤¤¤
Hall throttle is open
or short-circuit
When the throttle is repaired, a restart will clear the
fault.
3,4
¤¤¤ ¤¤¤¤
Non-zero throttle on
direction change
Controller won’t allow a direction change unless the
throttle or speed is at zero. Fault clears when throttle
is released.
4,1
¤¤¤¤ ¤
Regen or Start-up
over-voltage
Motor drive is disabled if an over-voltage is detected
at start-up or during regen. The voltage threshold
detection level is set during configuration.
4, 2
¤¤¤¤ ¤¤
Hall sensor error
1. Incorrect or loose wiring or a damaged hall
sensor.
2. Also be caused by incorrect hall angle
configuration (60 degree or 120 degree).
4, 3
¤¤¤¤ ¤¤¤
Motor
over-temperature
Motor temperature has exceeded the configured
maximum. The controller will shut down until the
motor temperature cools down.
The Red LED flashes once at power on as a confidence check and then normally stays
Off. “1, 2” means the Red flashes once and after a second pause, flashes twice. The pause
time between multiple flash code groups is two seconds.

Kelly KHB High Power Brushless Motor Controller User’s Manual V 4.5
Page 17
Contact Us:
Kelly Controls
Home Page:
http://www.KellyController.com
E-mail:
[e-mail]
Phone:
[phone] 5092