Kendall Howard 1901-1-001-01 User manual

4
DISCLAIMER: Kendall Howard LLC. endeavors to make this manual accurate and com-
plete. However, Kendall Howard LLC makes no representations or warranties of any
kind, expressed or implied, about whether the use of products contained herein would
infringe any rights or the correctness, accuracy or reliability of the information contained
herein or that said information covers all details, conditions or variations. The information
herein does not provide for every possible contingency in connection with the installation
or use of the product(s). The information contained in this document is subject to change
without notice or obligation. Kendall Howard LLC assumes no responsibility for the
accuracy, completeness or reliability of the information contained in this document. Any
relia n ce placed on the information is therefo re strictly at your own risk.
For details about product warranty, please visit www.kendallhoward.com
Instructions / Directions
1U Flanged Spacer Blank
# 1901-1-001-01
1
INNO VATOR S IN PRO DUCT DES IGN
w w w . k e n d a l l h o w a r d . c o m
A d d r e s s : 1 0 1 5 2 L i b e r t y L a n e
C h i s a g o C i t y , M i n n e s o t a , 5 5 0 1 3
U n i t e d S t a t e s o f A m e r i c a
Phone: [phone]
F a x : 800-418-6897

Tools Needed:
Included:
2
You may also need:
Screw Driver
2x / Tool-less Fastener
1x / 1U Flanged Spacer Blank
Assembly - Step 1:
Assembly - Step 2:
3
If using cage nut rails, install Tool-less Fas-
tener and / or rack screws on each end of
Spacer Blank. If using tapped rails, install with
rack screws.
Secure Tool-less Fasteners. If rack screws are
used, secure them with screw driver.