
DISCLAIMER: Kendall Howard LLC. endeavors to make this manual accurate and complete. However, Kendall Howard LLC makes no representaons or
warranes of any kind, expressed or implied, about whether the use of products contained herein would infringe any rights or the correctness, accuracy
or reliability of the informaon contained herein or that said informaon covers all details, condions or variaons. The informaon herein does not
provide for every possible conngency in connecon with the installaon or use of the product(s). The informaon contained in this document is subject
to change without noce or obligaon. Kendall Howard LLC assumes no responsibility for the accuracy, completeness or reliability of the informaon
contained in this document. Any reliance placed on the informaon is therefore strictly at your own risk.
For details about product warranty, please visit www.kendallhoward.com
Tools Required: What’s in the box?
Philip’s Head Screw Driver
QTY 2: Rack Rail
QTY 2: H-Brace
QTY 4: Wall Rack Brackets
QTY 16: Cross Head Screw
QTY 24: 10-32
Rack Screw
QTY 24: 10-32
Cage Nut
Step 1: Step 2:
Step 3: Step 4:
Cage Nut
Tapped
Wall mount hardware
not included.