22-4127X.PDF
22-41273/9
Page 1 of 1
Kenmore Elite 30-Inch Radiant Cooktop
Stainless 22-41273
Black 22-41279
• Ceramic glass surface
• One dual 12" / 9" @3,000 / 1,800W radiant element
• One 9" @ 3,200W Turbo Boil™ power element
• One 7" @ 1,500W element
• One 6" @ 1,200W element
• Four hot surface indicator lights
• Cast metal knobs
• Frameless design (41273: adds stainless trim on top and bottom)
Effective 10/04/10
14010
Due to Sears policy of continuous improve ment on its products, Sears
reserves the right to change materials and specifications without notice.
Before installing, consult installation instructions packed with product
for current dimensional and installation data.
SELECTION ELITE
Stainless 22-41273
Black 22-41279
COOKTOP FEATURES
Element Type Radiant
12-in. / 9-in. Dual (Watts) 1 @ 3,000 / 1,800
9-in. (Watts) 1 @ 3,200
7-in. (Watts) 1 @ 1,500
6-in. (Watts) 1 @ 1,200
Cast Metal Knobs •
Cooktop Surface Ceramic Glass*
Hot Surface Indicator Lights 4
GENERAL FEATURES
Power Rating (kW) @ 240 / 208V 8.9 / 6.7
Breaker / Copper Wire Size (240V)+40 / 8
Shipping Weight (Approx. Lbs.) 40
WARRANTY
1-Year Limited Warranty –
Entire Appliance Parts & Labor
2–5-Years Limited Warranty –
Glass Cooktop, Cooktop Elements Parts & Labor
If used for other than private family purposes, warranty applies for only 90 days.
*Stainless model has stainless trim
+Always consult local and national electrical codes
Model 22-41273 22-41279
Overall Stainless Black
Knobs Stainless Black
Surface Black Black
Trim Stainless Black
Dimensions, Inches Cutout
A B C D E F G H I J K
22-4127X 30 3/421 1/23 1/429 19 1/429 5/8 – 30 20 1/4 – 20 1/26 2 2 1/27 1/2
H**
A
min.
18"
12"
10"
J min.
13"
max.
30"*
24"
F
G
Approx.
location of
junction box
C
B
D
E
A
K
min.
K
min.
NOTE: It is not recommended to use drawer underneath cooktop. Empty space is needed for installation purpose.
* 30" min. clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet. 24" min.
clearance when bottom of wood or metal cabinet is protected by not less than 1/8" flame retardant millboard covered with not
less than No. 28 MSG sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.
** Allow 2" below cooktop to clear the electric cable and allow space for installation of the junction box on the wall at the back
of the cooktop.
