Kenmore 141.16695 User manual

Owner's Manual
Rustic Tan Granite Island
Model 141.16694 Right Side Rustic Tan
141.16695 Left Side Rustic Tan
Panama Gray Granite Island
Model 141.16696 Right Side Panama Gray
141.16697 Left Side Panama Gray
Z_ WARNING
Your Granite Island is very heavy.
With the assistance of another person, use
care when unpacking, moving and assembling
the granite pieces to avoid bodily injury and
breakage of the granite.
Note to Consumer: Due to the natural qualities of
granite, the grain, texture and color will vary slightly
between pieces and from printed swatches.
Leave this Owner's Manual in a convenient place for
future reference.
Note to Installer: Leave this Owner's Manual Sears, Roebuck and Co.,
withthe consumerafter deliveryand/orinstallation. Hoffman Estates, IL 60179 U.S.A.
P80147054A-Rev:2003/03/12

Before assembling your Granite Island, use the parts list below to check that all necessary parts have been
included, Inspect parts for damage as you proceed, If there are damaged or missing parts when you
unpack this unit from the shipping box, call us 8am - 8pm CST, Monday through Friday at: 1-888-317-7642
/-
/-
/-
21--
REF# DESCRIPTION
1. Leg - L1/R4
2. Leg - L2/R3
3. Leg - L3/R2
4. Leg - L4/R1
5, S/S Decorative Plate - Left - L5
6. Left Top Table Panel - L6
7, Left Bottom Shelf - L7
8. Door Decorative Panel
9. Door Stop Plate
10, Door Hinge - Top
11. Door Hinge - Bottom
12. Door Panel
13. Door trim Panel
14. Round Door Handle
15. Leg Seat
16. Adjustment Bolt Seat
PART#
P00912039C
P00gl0040C
P00911041C
P00913042C
P07505012A
P01004038D
P01004039D
P07511011A
P05510118A
P03314030A
P03314031A
P04301013B
P07510010A
P00216037A
P04516014A
P05322036A
QTY REF# DESCRIPTION PART# QT_
2 17. Granite Pane]- LA
Rustic Tan P07802015A 1
2 Panama G_y P07803015A 1
218. Granite Panel- LB1 /RB1
2 Rustic Tan P07802021A 2
Panama G_y P07803021A 2
1
1 19. Granite Panel- LB2 /RB2
Rustic Tan P07802022A 2
1Panama G_y P07803022A 2
420. Granite Panel- LC
2 Rustic Tan P07802017A 1
Panama G_y P07803017A 1
2
2 21. Granite Panel- LD
Rustic Tan P07802019A 1
2 Panama G_y P07803019A 1
222. Le_ G_nite Top Table PaneI-LF
2 Rustic Tan P07802013A 1
Panama G_y P07803013A 1
8
8
2

i= #a[et,JnraLeF. =
23_
&
REF# DESCRIPTION
30
PART# QTY REF# DESCRIPTION PART#
23, S/S Decorative Plate - Right - R5
24, Right Top Table Panel - R6
25, Right Bottom Shelf -R7
P07504012A 1 31. Granite Decorative Panel
P01004040D 1 For 4 Burners Grill
-Rustic Tan -LE P07802023A
P01004041D 1 -Panama Gray - LE P07803023A
26, Granite Panel - IRA
Rustic Tan
Panama Gray
27, Granite Panel - RC
Rustic Tan
Panama Gray
28, Granite Panel - RD
Rustic Tan
Panama Gray
29. Right Granite Top TaMe Pane[-RF
Rustic Tan
Panama Gray
30, Connection Plate
Granite Deco_tive Panel
P07802016A 1 For 6 Burners Grill
P07803016A 1 -Rustic Tan - LE P07802024A
-Panama G_y-LE P07803024A
PO7802018A 1 32. Granite Decorative Panel
PO7803018A 1 For 4 Burners Grill
-Rustic Tan - RE P07802027A
-Panama Gray -RE P07803027A
P07802020A 1
P07803020A 1 Granite Decorative Panel
For 6 Burners Grill
-Rustic Tan - RE P07802028A
P07802014A 1 -Panama Gray -RE P07803028A
P07803014A 1 .... Hardware Pack "A" P06016044A
P05326037G 1 .... Hardware Pack "B" P06016056A
.... Owner's Manual P80147054A
QTY
2
1
1
For the repair or replacement parts you need: Call anytime
1-800-4-MY-HOME'l-800-469-4663)
To make sure you obtain the correct replacement parts for your Kenmore Granite Island, please refer to the part
numbers on this page. The following information is required to assure you receive the correct parts:
1. Granite island Model Number
2. Part Number
3. Part Description
4. Quantity of parts needed
Important: Keep this Owner's Manual for convenient referral and for pert replacement.
Important: Use only Sears authorized parts. The use of any part that is not Sears authorized can be dangerous
and will also void your product warranty.
3

Assembly Instructions
Before assembling your Granite Island, refer to the top view of assembly position
and check the layout of each part number.
LEFT ISLAND TOP VIEW RIGHT ISLAND TOP VIEW
L4 BO]]OMSHrLr R4 @
©
7IiIr
L1 _) @
TOP(_ 1_SJ _ TOP
BOTTOM_) .2 R _) BOTTOM
TOPPANFLOF LFFTISLANDFRAMF TOPPANFLOF RIGHTISLANDFRAMF
Tools required for assembly:
#2 Phillipshead screwdriver 1/4" Wrench or AdjustableWrench
Contents for Hardware Pack "A" (Part #P06016044A)
Actual Size and Quantity of Each Hardware Piece:
H036 H030
Qty, 24 Qty.4
1/4"x3/8" S/S Phillips Head Screw 1/4"x2" S/S Phillips
Head Screw
H038 HO09
Qty. 20 Qty.20
1/4"x3/4" S/S Hexagon 1/4" SIS Lock Nut
Socket Head Bolt
Contents for Hardware Pack "B" (Part #P06016056A)
Actual Size and Quantity of Each Hardware Piece:
H038 H009 H040
Qty. 4 Qty,4 Qty,1
1/4"x3/4" S/S Hexagon 1/4" S/S Lock Nut Customized Wrench
Socket Head Bolt
4

Assembly Instructions
i WARNING
Read these instructions before assembling your granite islands. The granite
pieces are very heavy. With the assistance of another person, use care when
unpacking, moving and assembling the granite pieces to avoid bodily injury
and breakage of the granite.
Make sure the surface is solid, flat and level. Rough or soft ground will
cause levelling problems that could cause the grill to incline, door frames to
distort and/or the island to partially sink after installation.
1. Please locate the following free space per diagram for installation of the models of the
grill with granite island, 153"
P5 P2
,f
/
/
/
/
/
/
\\\\
//
--_'\\\\\\
>
\/
\/
\/
\/
INSTALLATION AREA FOR 6B GRILL MODEL 16690 /17690
142"
,4
P3 P2
/--\
/
/
/
/
/
/
/
\
/
/
\ f
/
". j
/
/
/
\//
INSTALLATION AREA FOR 4B GRILL MODEL 16680 /17680
=
O4
2, Use a tape measure to ensure that all four (4) points P1, P2, P3 and P4 are at the
same height,
P3_
P4 _ _P1P2
i)
@@o@ @ @ @o '
_D
cO
03
////////////////////////// //////////////// /////,
SOLID AND FLAT
SURFACE
/// ////////////////
5

STEP 1
Assembling Left Granite Island Frame
Attach 4 Legs to Top Table Panel and Bottom Shelf. Tighten securely by using 16 of the
1/4"x3/8" Phillips head screws provided.
Left Top Table Panel - L6
Qty. 16 ,/_ -""
1/4"x3/8" Phillips f'
Head Screws - L4
-- ;J
Leg - L3
- L1
Left Bottom Shelf - L7
STEP 2
Attach S/S Decorative Plate to the Frame. Tighten securely by using 2 of 1/4"x3/8" Phillips
head screws provided.
Left Top Table Panel- L6
Leg - L3
Left Bottom Shelf - L7
Leg - Leg - L1
Qty. 2
1/4"x3/8" Phillips
Head Screws
Plate - L5

STEP 3
Installing Door Kit To Left Frame
Attach Door Stop Plate to the Frame, Tighten securely by using 2 of 1/4"x3/8" Phillips head
screws provided,
Leg -
Qty, 2
1/4"x3/8" Phillips __ - _ _/" _
Head Screws
/
___ Door Stop Plate
Left Top Table Panel - L6
Leg - L2
Left Bottom Shelf - L7
STEP 4
Attach Door Decorative Panels to the Frame, Tighten securely by using 4 of 1/4"x2" Phillips
head screws provided,
Qty. 4
1/4"x2" Phillips
Head Screws
Left Top Table Panel - L6
- L2
Left Bottom Shelf - L7
Door Decorative Panel
7

STEP 5
Install the Door Panel by the following steps
1. Attach the Bottom Door Hinge to the cart leg as shown. Then tighten securely using the
two 1/4"x3/8" Phillips head screws provided. See Fig 1.
2. Match the bottom axle hole of the Door Panel into the stud on the Bottom Door Hinge.
See Fig 2.
3. Attach the Top Door Hinge to the Door Panel by inserting the stud into the axle hole on
the top of Door Panel. See Fig 3.
4. Attach the Top Door Hinge to the leg by keeping the Door Panel upright, Align the 2
holes on the Door Hinge with the 2 holes on the Leg. Tighten securely using 2 of 1/4"x3/8"
Phillips head screws provided. See Fig 3.
Figure 1.
Qty, 2
1/4"x3/8" Phillips
Head Screws.,
Door Hinge - Bottom
Figure 2. Figure 3.
Door
Qty. 2
1/4"x3/8" Phillips
Head Screws
Door Hinge - Top
STEP 6
Assembling Right Granite Island Frame
Follow steps 1 through 5 of assembling procedures for Left Granite Island Frame to assemble
Right island Frame.
Left Granite Island Frame Right Granite island Frame

STEP 7
Connecting the Metal Frames to your grill.
1. Make sure to remove handle and side shelf from grill before attaching island frame (Keep
4 of the 1/4"x3/4" Phillips head screws from side shelf). Attach Frame to the side of
grill. Align the holes on the Frame with the threaded holes on the Grill and insert 2 of
the 1/4"x3/4" Phillips head screws (from the side shelf) and tighten securely. Repeat this
operation for the other island frame. After connecting the two Granite island Metal Frames
to your grill, make sure the Island is stable and level by adjusting the Adjustment Bolt
Seats on legs under the door,
," Qty.2
1/4"x3/4" Phillips
-_,\ ', /' Head Screws
2. Use a tape measure to ensure that all four (4) points of island frame (A1 etc) are at
the same height. Adjust if necessary before installing granite panels.
A4

STEP 8
Installing Granite Panels to the Island Frame
When installing Granite Panels to the Island Frame, we recommend you follow this installation order
for ease of assembly: LB2, LB1, LD, LA and LC. Install 1/4"x3/4" hexagon socket head bolts into
granite panels using the Customized Wrench provided. NOTE: when installing the hexagon socket
head bolts, the anchor will spin if overtightened. This is not a problem as the anchor is designed to
spin to prevent damage to granite panel. Mount panels to frame and tighten securely (do not
overtighten) using 16 of 1/4" lock nuts provided. Check frame with level if you have problems
installing the panels to the frames. Qty.16
Qty. 16 1/4" Lock Nuts
1/4"x3/4" Hexagon Socket
Head Bolts _ Granite Panel - LD
Granite Panel - LC
Granite Panel - LB1
Granite Panel - LB2
Granite Panel - LA
STEP 9
Installing Granite Top Table Panel to Frame
install Granite Top Table Panels to Frame as shown. Install 1/4"x3/4" hexagon socket head bolts
into granite top table panel using the Customized Wrench provided. Mount top table panel to frame
and tighten securely by using 4 of 1/4" lock nuts provided.
Granite Top
Table Panel
Qty. 4
1/4"x3/4" Hexagon
Socket Head Bolts
Qty.4
1/4" Lock Nuts
STEP 10
Repeat Steps 8 and 9 for Right Granite Island Panels.
10

STEP 11
Assembling Granite Decorative Panels
4 sections of Granite Decorative panels are provided for different model grills, You will only use 2
pieces, Locate the 2 pieces of the same size that fit the overall length of your grill. Assemble
the 2 Granite Decorative Panels with the Connection Plate as shown below. Install 1/4"x3/4"
hexagon socket head bolts into Granite Decorative panel using the Customized Wrench provided.
4
Qty, 4 ..............
1/4"x3/4" Hexagon _
Socket Head Bolts
Granite Decorative
Panel - RE
Connection Plate
Granite Decorative Panel - LE
STEP 12
Instal] the Granite Decorative Panel to the underside of grill. See Fig 4 & 5.
Figure 4. Figure 5.
Granite Decorative
Panel
Granite Decorative
Panel
11

CONGRATULATIONS
Congratulations your Kenmore Island is now ready for use, If you live in a cold climate, we
recommend that you seal the inside seams of the granite panels with a proper caulk or sealant
to prevent moisture from accumulating in the seams and possibly freezing which might cause
flaking or cracking of the granite.
Left Granite Island
Right Granite Island
Granite Decorative Panel
12

Your Home
For repair - in your home - of all major brand appliances,
lawn and garden equipment, or heating and cooling systems,
no matter who made it, no matter who sold it!
For the replacement parts, accessories and
owner's manuals that you need to do-it-yourself.
For Sears professional installation of home appliances
and items like garage door openers and water heaters.
® Registered Trademark /TM Trademark !SMService Mark of Sears, Roebuck and Co
® Marca Registrada /,M Marca de Fabrica /sM Marca de Servicio de Sears, Roebuck and Co
#cMarque de commerce !_Msrque deposee de Sears, Roebuck and Co. ® Sears, Roebuck 8rid Co