Kenmore Galaxy side by side User manual

Galaxy
Side by Side Refrigerator
Use & Care Guide
Lado aLado Refrigerador
Gufa para su uso y cuidado
Compartiments C6te _ C6te R_frig_rateur
Guide d'utilisation et d'entretien
Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A.
Sears Canada, mnc.,Toronto, Ontario, Canada MSB 2B8 www,sear's,com
241822300 (0408)
Z
M
t_

Welcome &
Congratulations
Congratulations on your purchase of a new refrigerator! We
here at Sears are very proud of our product and we are
completely committed to providing you with the best
service possible, Your satisfaction is our #1 priority,
We know you'll enjoy your new refrigerator and ThankYou
for choosing our product, We hope you consider us for
future purchases,
PLEASE READ AND SAVE THESE
iNSTRUCTiONS
This Owner's Guide provides specific operating
instructions for your model, Use your refrigerator only as
instructed in this manual, These instructions are not meant
to cover every possible condition and situation that may
occur, Common sense and caution must be practiced
when installing, operating and maintaining any appliance,
Ptease record your model and seriaJ numbers beJow
for future reference.This information is found on the
serial pJate located inside the refrigerator
compartment.
NOTE; Use on!y soap and water to clean seria! p!ate,
Model Number: 253
or: 970
Serial Number:
Purchase Date:
TABLE OF CONTENTS
Record Serial/Model Numbers ............ 2
Safety .................................................. 2-3
Warranty .............................................. 3
Canada - Limited Warranty .................. 4
Protection Agreements ........................ 5
tnstaUUation ........................................... 6-7
Door Removal instructions ................. 8
Features At A Glance ......................... 9
Temperature Controls .......................... 10
Looking inside ..................................... 11-12
Automatic ice & Water Dispenser ....... 13=15
Rear Ice and Water Filter ..................... 16
Food Storage & Energy Saving Tips ... 17
Normal Operating Sounds & Sights .... 18
Care & CUeaning .................................. 19o20
Before You CaUl.................................... 21-24
Important Safety
Instructions
Please Read AJJInstructions Before
UsingThis Refrigerator.
FOR YOUR SAFETY
Do not store or use gasoline, or other flammable liquids
in the vicinity of this or any other appliance, Read product
labels for warnings regarding flammability and other
hazards,
o Do not operate the refrigerator in the presence of
explosive fumes,
Avoid contact with any moving parts of automatic ice
maker,
Remove all staples from the carton, Staples can cause
severe cuts, and also destroy finishes if they come in
contact with other appliances or furnitu re,
CHILD SAFETY
Destroy or recycle the carton, plastic bags, and any
exterior wrapping material immediately after the refrigerator
is unpacked, Children should NEVER use these items to
play, Cartons covered with rugs, bedspreads, plastic
sheets or stretch wrap may become airtight chambers,
and can quickly cause suffocation,
PROPER DISPOSAL OF YOUR REFRmGERATOR
OR FREEZER
Risk of child entrapment
Child entrapment and suffocation
are not problems of the past,
Junked or abandoned refrigerators
or freezers are still dangerous -
even if they will sit for "just a few
days," if you are getting rid of your
old refrigerator or freezer, please
follow the instructions below to
help prevent accidents,
Before you throw away your old refrigerator/freezer:
Remove doors,
o Leave shelves in place so children may not easily climb
inside,
o Have refrigerant removed by a qualified service
technician,

These Guidelines Must Be FoHowedTo EnsureThat
Safety Mechanisms InThis Refr!getat0rW!lJ Operate
Properly.
ELECTRICAL INFORMATION
*The refrigerator must be plugged into its own
dedicated ! 15 VoJt,60 Hz., AC only etectric outlet.
The power cord of the appliance is equipped with a
three-prong grounding plug for your protection against
electrical shock hazards, it must be plugged directly
into a properly grounded three-prong receptacle, The
receptacle must be installed in accordance with local
codes and ordinances, Consult a qualified electrician,
Do not use an extension cord or adapter plug.
*Immediately repair or replace any power cord that
becomes frayed or damaged,
Never unplug the refrigerator by pulling on the power
cord, Always grip the plug firmly, and pull straight out
from the receptacle to prevent damaging the power cord,
Unplug the refrigerator before cleaning and before
replacing a light bulb to avoid electrical shock,
Performance may be affected if the voltage varies by
10% or more, Operating the refrigerator with insufficient
power can damage the compressor, Such damage is
not covered under your warranty,
Do not plug the unit into an outlet controlled by a wall
switch or pull cord to prevent the refrigerator from being
Avoid connecting refrigerator toa Ground Fault Interruptor
(GFi) circuit,
IMPORTANT: Turning the Freezer and Fresh Food
Controls to "0" turns oll the compressor and prevents
your refrigerator from cooling, but does not disconnecl
the power to the light bulb and other electrical
components, Toturn off power to your refrigerator, you
must unplug the power cord from the wall receptacle,
Grounding [ype
wamlreceetacb.f _.
Do not. under
any circumstances,
cut, remove,
or bypass the
grounding prong.
FULL ONE-YEAR WARRANTY ON
REFRIGERATOR
For one year from the date of purchase, when this
refrigerator is operated and maintained according to the
instructions provided in this Owner's Guide, Sears will
repair this refrigerator, free of charge, if defective in
FULL FIVE-YEAR WARRANTY ON SEALED
REFRIGERATION SYSTEM
For five years from the date of purchase, when this
refrigerator is operated and maintained according to the
instructions provided in this Owner's Guide, Sears wiii
repair the sealed system (consisting of refrigerant,
connecting tube, and compressor motor), free of charge, if
defective in material or workmanship,
The above refrigerator warranty applies only to
refrigerators which are used for storage of food for private
household purposes,
FULL 30-DAY WARRANTY ON KENMORE
REFRIGERATOR WATER FiLTRATiON CARTRIDGE, if
this Kenmore Refrigerator Water Filtration Cartridge fails
due to a defect in material or workmanship within 30 days
from the date of purchase, RETURN iT TO THE
NEAREST SEARS STORE iN THE UNITED STATES
and Sears will replace it, free of charge,
This warranty gives you specific legal rights and you may
also have other rights which vary from state to state,
Warranty service is available by contacting the NEAREST
SEARS SERVICE CENTER/DEPARTMENT in the United
States, See the back page of this manual,
For warranty questions, please contact the following
address:
Sears, Roebuck and Co.
Dept. 817WA
Hoffman Estates, mL 60179
Power cord with
3-prong grounded pmug

L
rs
Sears Canada Inc., warrants every new Kenmore refrigerator to be free from defects in material or workmanship.
What Sears win do, free of charge, in case of defect:
Parts: At Sears' option
. _ How ong warrantea 1 ; ",.... 2.....,. Labor: instal repairea or
What is covered. " either repair u_ =u_p_y
: . !!pt!_llllfll{ p!!! !U!I .
(from dale of sa e ;.-_,_2;,_ L=. ,..2...._D rep acement part for
The Compressor TEN (10) YEARS TEN (10) YEARS FiVE (5) YEARS
The Sealed System
(consisting of refrigerant, FiVE (5) YEARS FiVE (5) YEARS FiVE (5) YEARS
evaporator, and condenser)
All other parts or
adjustments ONE (1) YEAR ONE (1) YEAR ONE (1) YEAR
Normal Responsibility of the Customer
The following items, since they are not manufacturing defects, are not included in the warranty, but are the
responsibility of the customer:
1) Damage to finish after delivery.
2) Improper power supply, low voltage, or any defects in the house wiring system or appliance not connected
to electric outlet.
3) Replacement of light bulbs.
4) Damage caused by moving the product from its original installation.
5) Service required as a result of alteration, abuse, fire, floods, or acts of God.
6) Providing adequate air circulation to the refrigerating system.
7) Proper use and care of product as listed in the customer's manual; proper setting of the controls.
If any service is required under this warranty, simply call 1-800-FOR-IvlY-HOME (1:800:469:4663).
This warranty is in addition to any statutory warranty. The above warranty covers Kenmore Refrigerators
sold and operated in Canada only and shall not apply if the refrigerator is used for other than domestic
purposes.
Sears Maintenance Agreement
Maintain the value of your Kenmore refrigerator with a Sears Maintenance Agreement.
SEARS CANADA INC. •Toronto, Canada , M5B 2B8
PRINTED IN U.S.A.

PROTECTION AGREEMENTS
In the U.S.A.
Master Protection Agreements
Congratulations on making a smart purchase, Your
new Kenmore ®appliance is designed and
manufactured for years of dependable operation, But
like all products, it may require preventive
maintenance or repair from time to time, That's when
having a Master Protection Agreement can save you
money and aggravation,
Purchase a Master Protection Agreement now and
protect yourself from unexpected hassle and expense.
The Master Protection Agreement also helps extend
the life of your new appliance. Here's what's included
in the Agreement:
tv Expert service by our 12,000 professional repair
specialists
tv Unlimited service and no charge for parts and
labor on all covered repairs
_' "No-lemon" guarantee- replacement of your
covered product if more than three product failures
occur within twelve months
_' Product replacement if your covered product
can't be fixed
_' Annual Preventive Maintenance Check at your
request - no extra charge
_' Fast help by phone - non-technical and
instructional assistance on products repaired in
your home, plus convenient repair scheduling
_' Power surge protection against electrical
damage due to power fluctuations
tv Rental reimbursement if repair of your covered
product takes longer than promised
Once you purchase the Agreement, a simple phone
call is all that it takes for you to schedule service, You
can call anytime day or night, or schedule a service
appointment online,
Sears has over 12,000 professional repair specialists,
who have access to over 4.5 million quality parts and
accessories, That's the kind of professionalism you
can count on to help prolong the life of your new
purchase for years to come, Purchase your Master
Protection Agreement today!
Some limitations and exclusions apply. For prices
and additional information, call 1-800-827-6655.
Sears Installation Service
For Sears guaranteed professional installation of home
appliances and items like garage door openers and
water heaters, in the U.S.A. call 1-800-4MY-HOME ®,
In Canada
Maintenance Agreements
Your purchase has added value because you can
depend on Sears HomeCentral ®for service, With over
2400 Service Technicians and access to over 900,000
parts and accessories, we have the tools, parts,
knowledge and skills to ensure the pledge: We Service
What We Sell.
Your Kenmore ®appliance is designed, manufactured
and tested to provide years of dependable operation,
Yet any major appliance may require service from time
to time, The Sears Maintenance Agreement offers you
an outstanding service program, affordably priced,
The Sears Maintenance Agreement
• Isyour way to buy tomorrow's service at today's
price.
• Eliminate repair bills resulting from normal wear
and tear,
• Provides for non-technical and instructional
assistance,
• Even if you don't need repairs, provides an annual
Preventive Maintenance Check, at your request, to
ensure that your appliance is in proper running
condition.
Some limitations apply. For information
concerning Sears Canada Maintenance
Agreements, call 1-800-361-6665

This Owner's Guide provides specific operating
instructions for your model, Use the refrigerator only as
instructed in this Use & Care Manual, Before starting the
refrigerator, follow these important first steps.
LOCATION
Choose a place that is near a grounded electrical outlet,
Do Not use an extension cord or an adapter plug,
if possible, place the refrigerator out of direct sunlight
and away from the range, dishwasher or other heat
sources,
The refrigerator must be installed on a floor that is bveU
and strong enough to support a fully baded refrigerator,
Consider water suppUyavailability for modeb equipped
with an automatic ice maker,
mNSTALLATION
DONot instaJl the refrigerator where
the temperature will drop below 55°F (13°C) or rise
above t 10_'F(43QC).The compressor will not be able
to maintain proper temperatures inside the
lower front of your refrigerator. Sufficient air CirCulat!on
is essential for the proper operation of your
refrigerator.
installation Clearances
, Allow the following clearances for ease of installation,
properaircircuUation,andpUumbingandeUectrica,
connections:
Sides a Top ............... 3/8"
Back ........................ 1"
ooo
NOTE: !f YOUrefrigerator is piaced With thedoor hinge
side against a wa!l, you may have to a!low additional
space so the door can be opened wider.
Your refrigerator should be positioned to allow easy access
to a counter when removing food, For best use of drawers
and freezer baskets, the refrigerator should be in a
position where both the refrigerator and freezer doors can
TOE GRILLE INSTALLATmON /REMOVAL
To Remove Toe Grille:
1, Open freezer and fresh foodcompartment doors,
2, Working from left sideof toe grille,slip yourfingers between
topoftoegrilleand cabineLGently pullforward untilfirstset of
tabsare free,Slide yourhanddown pastthe freetabs and pull
forward again untilthe second set oftabs are free, Continue
this process until all tabs are free and thetoe grille can be
remove& (See graphic attop of page in rightcolumn,)
To/nstatl Toe Grilte:
1, Open freezer and
fresh food
2,
3,
base of refrigerator,
making sure the four
bottom tabs are
resting through hobs
at base of cabinet,
Starting from left side
Cabinet
//
of toe grille, press in on first top tab using your thumb
and push toe grille forward until itsnaps in place, Continue
this process until all tabs aresnapped in place and toe
grille is secured to refrigerator,
LEVELING
All four corners of your refrigerator must rest firmly on a
solid floor, Your refrigerator is equipped with adjustable
front rollers to help level your unit, To ensure proper door
seal and assist door closing, the refrigerator should be
tilted 1/4" (6 ram), front to back,
To Level Your Refrigerator:
1, Remove toe grille, (See "ToRemove Toe Gri//e",)
2, Use fiat-blade screwdriver or 3/8" socket wrench
to adjust front rolbrs,
3,
6
i
Check both doors to be sure seals touch cabinet on all
four sides,

iftstallatio - connecting Ice Maker To Water Supply
To avoid eJectric shock, which can cause death or severe personaJ injury, disconnect the refrigerator
from eJectricaJ power before connecting a water supply line to the refrigerator.
To Avoid Property Damage:
oCopper tubing is recommended for the water suppJy Jine.Water supply tubing made of ¼"" plastic is not
recommended since it greatly increases the potentiaJ for water leaks. Manufacturer will not be responsiMe
for any damage if plastic tubing is used for supply line.
oDO NOT install water supply tubing in areas where temperatures fai! beJowfreezing.
oChemicaJs from a maffunctioning softener can damage the ice maker, if the ice maker is connected to soft
water, ensure that the softener is maintained and working properly.
IMPORTANT: Ensure that your water supply line connections comply with all local plumbing codes,
Before/nstafling The Water Supply Line, You Will Need
,, BasicTools: adjustable wrench, flat=blade screwdriver, and PhillipsTM screwdriver
oAccess to a household cold water line with water pressure between 20 and 100 psi,
A water supply line made of ¼ inch (6,4 mm) OD, copper tubing, Todetermine the length of copper tubing needed,
you will need to measure the distance from the ice maker inlet valve at the back of the refrigerator to your cold water
pipe. Then add approximately 7 feet (2.1 meters), so the refrigerator can be moved out for cleaning (as shown).
A shutoff valve to connect the water supply line to your household water system. DO NOT use a self-piercing type
shutoff valve.
A compression nut and ferrule (sleeve) for connecting the water supply line to the ice maker inlet valve.
NOTE: A waterline kit is aVailable from your appliance dealer at additional cost. it Contains 25 feet (7,6 meters) of ¼
To ConnectWaterSupp/yMneTo/ceMaker/n/etVa/ve P,astiowate_Tub_,,g ::_II
to Ice Maker _ Steel
1. Disconnect refrigerator from electric power source. _ FillTuBeC'8mP
2. Place end of water supply line into sink or bucket. Turn ON water supply Brass i i
and flush supply line until water is clear. Turn OFF water supply at shut compressbn
off valve.
s Unscrewplasticcapfromwatervalveinletanddiscardcap
4. Slide brass compression nut, then ferrule (sleeve) onto water supply line, (SU ,
as shown.
5. Push water supply line into water valve inlet as far as it wiii go (¼ inch), waferline
Slide ferrule (sleeve) into valve inlet and finger tighten compression nut watervalve
onto valve. Tighten another half turn with a wrench; DO NOT over tighten.
6. With steel clamp and screw, secure water supply line to rear panel of
refrigerator as shown.
7. Coil excess water supply line (about 2_/2turns) behind refrigerator as shown
and arrange coils so they do not vibrate or wear against any other surface.
8. Turn ON water supply at shutoff valve and tighten any connections that
leak.
9. Reconnect refrigeratortoelectrical powersource.
10. To turn ice maker on, lower wire signal arm (see ice maker front cover for
ON/OFF position of arm).
from h0usebe!d water supply
(include enough tubing in Io0p to allow
moving refrigerator out for cleaning.}
cause !ce maker to cycle two or three times before making a fu!!tray of ice. New plumbing may cause iceto be discolored
or have poor flavor. Discard ice made during the first 24 hours.

Door Removal instructions
lop
H_nge
£r,ew lop Hinge Cove_ Screw
_oltom
HL_ge _"t
Screw
Tools Necessar
Phi iD_ eQu
oR _
3/8"
Fixc_d
vv/er_cf
Hinge
DOOR REMOVAL INSTRUCTIONS:
If it is necessary to move the refrigerator through narrow doorways,
follow these steps to remove the doors.
IMPORTANT: Before you begin, turn Freezerand Fresh Foodcontrob
to "O" and remove ebctrbal power cord from wail outlet. Remove any
food from door shelves.
1. Disconnect electrical supply.
2. Open both doors, then remove toe grille.
8. Close doors.
To Remove Refrigerator Door:
1 Remove top hinge cover screw on refrigerator door and remove cover.
2. Trace around hinge with soft lead pencil. This wiii make it easier to realign
doors when they are replaced.
3. Remove top hinge and lift refrigerator door off bottom hinge pin. Set door
aside
4. Remove bottom hinge, f necessary.
5. Reverse this procedure to reinstall refrigerator door
To Remove Freezer Door:
1. Disconnect water line coming from lower hinge of freezer door at connection
located under front of freezer: Press outer ring against face of fitting, then puii
to remove tube.
2 Remove top hinge cover screw on freezer door and remove cover.
3. Disconnect wiring harness connector plug at top hinge: place your thumbs on
fiat sides of each connector and bend both parts back and forth then with
firm grasp, puii both pieces apart.
4. Trace around hinge with soft lead pencil. This wiii make it easier to realign
doors when they are replaced.
5. Remove top hinge, allowing wiring harness to puii through hinge and lift freezer
door off of bottom hinge pin.Lay door down fiat to avoidkinking water line.
6. Remove bottom hinge, f necessary.
7. Reverse this procedure to reinstall freezer door.
When both doors have been reinstalled, connect water line by inserting tube and
push until mark touches face of fitting, replace toe grille and plug in electrical power
cord. Turn both temperature controls to center position. Adjust settings as necessary.
TO D|SCONNEOT
1. Press _uter ringagalIlst _ace
oush until mark touches face of fitt{ng
J J
"ubi_#
J" Hinge
Assetltbly Screws

Freezer and Refrigerator
Controls
RceCream
ice Maker
SpiiiProof TM
g Shelf
Water Filter
Door
Small totems
Door
Door
Small
Large
Door
Large
Door
Dairy Door
Door Bin
Wine Rack
Door Bin
Meat Keeper
and Cover
SpiiiProof TM
Fixed Shelf
Door Bin
Egg Tray
Special Rtem
Rack
Tail Bottle
Retainer
Crisper Pan
and Cover
F ,ed
DoorBio _(
Toe Grille
Features may vary according to model

COOL DOWN PERIOD
To ensure safe food storage, allow the refrigerator to operate with the doors closed for at bast 8 to 12 hours before
loading it with food,
REFRIGERATOR & FREEZER CONTROLS
TEMPERATURE ADJUSTMENT
• After 24 hours, adjust the controls as needed. Adjust
temperatures gradually; move the knob in small
increments, allowing the temperature to stabilize.
• For colder temperatures, turn the knob towards Colder.
o For warmer temperatures, turn the knob towards Cold.
To maintain temperatures, a fan circulates air in the
refrigerator and freezer compartments. For good circulation,
do not block cold air vents with food items.
Refrigerator & Freezer Controls
(Features may vary according to model.)
TEMPERATURE ADJUSTMENT GUIDE
If Fresh Food Compartment Is Too Warm Turn Fresh Food Control Slightly Towards Colder.
If Fresh Food Compartment Is Too Cold Turn Fresh Food Control Slightly Towards Cold,
If Freezer Compartment Is Too Warm Turn Freezer Control Slightly Towards Colder.
If Freezer Compartment Is Too Cold Turn Freezer Control Slightly Towards Cold.
* To Turn Refrigerator Off Turn Freezer and Fresh Food Controls To O.
IMPORTANT: Turning the F[eezer and Fresh Food Controls to "0"turns off the compressor and prevents your refrigerator
from cooling, but does not disconnect the power tothe light bulb and other electrical Components: To turn off power to
your refrigerator you must unp!ug the power cold f[em the wa!! outlet,
lO

TIP-UPSHELF(SOMEMODELS)
ATip-Upsheffinthefreezersectionallowstallitemstobe
easilystored.
To avoid personaJ injury Or property
damage, handle tempered glass shelves carefully.
Shelves may break suddenly if nicked, scratche d,
or exposed to sudden temperature change.
CANTILEVER SHELF ADJUSTMENT
Refrigerator sheUvesare easily adjusted to suit individuaU
needs. Before adjusting the sheUves,remove aHfood.
Cantilever sheUvesare supported at the back of the
refrigerator.
To adjust cantilever shelves:
Lift front edge up,
Pull shelf out,
Replace the shelf by inserting the hooks at rear of the
shelf into the wall bracket, Lower the shelf into the desired
slots and lock into position,
SpillProoF Mglass shelves (some models) catch and hold
accidental spills, In some models, the SpillProof TM shelves
slide out for easy access to food and for fast cleaning, The
shelves slide out independently of their mounting brackets,
DOOR STORAGE
Door bins and shelves are provided for convenient storage
of jars, bottles, and cans, Frequently used items can be
quickly selected,
Some models have door bins that can accommodate
gallon-sized plastic drink containers and economy-sized
jars and containers, Some bins are adjustable for
maximum storage capacity,
The dairy compartment, which is warmer than the general
food storage section, is intended for short term storage of
cheese, spreads, or butter,
Fixed Door Bin
Cantilever Glass Shelf
Cantilever Sliding Glass Shelf
ADJUSTABLE DOOR BINS
Some models have adjustable door bins that can be
moved to suit individual needs.
Tomove door bins
1, Lift bin straight up,
2, Remove bin,
3, Place bin in desired position,
4, Lower bin onto supports until locked in place,
Adjustable Door Bin
11

TALL BOTTLERETAmNER(SOME{V1ODELS)
TheTallBottHeRetainerkeepstaHHcontainersinthebin
fromfaHHngforwardwhenopeningordosingthe
refrigeratordoor,ToinstaHH,hoHdtheretaineratthetop,and
slideitovertheoutsidewaHHofthebin,asshowninthe
diagram,TheTallBottHeRetainerworksbestwithaBin
Snugger,
Tail Bottle Retainer (left) and Bin Snugger (right)
CRISPERS (SOME MODELS)
The crispers, Hocatedunder the bottom refrigerator sheHf,
are designed for storing fruits, vegetabHes, and other fresh
produce. Wash items in dear water and remove excess
water before pHacingthem in the crispers. Htemswith
strong odors or high moisture content shouHdbe wrapped
before storing.
Crisper Drawer
HUMIDITY CONTROL (SO[VlEMODELS)
The Humidity Control present on some modemswith
crisper drawers, aHHowsyou to adjust the humidity within
the crisper. This can extend the Hifeof fresh vegetabHes
that keep best in high humidity.
NOTE: Leafy vegetabHeskeep best when stored with the
Humidity C0ntroHset 0n Higher Hum!d!ty, or in a drawer
minimum and maintains maximum moisture content,
Higher Humidity Lower Humidity
Crisper Humidity Control
DEM DRAWER (SOME MODELS)
Some modemsare equipped with a DeHiDrawer for storage
of Huncheonmeats, spreads, cheeses, and other deHi
items.
WINE RACK (SOME MODELS)
There are two different style Wine Racks. (See A and B
below.) The Wine Rack stores bottles of wine, or single two-
liter plastic bottles of juice or soda pop. To install, slide
Wine Rack (A) onto the shelf with the curve facing in. To
remove, slide the Wine Rack out. Hnstallon either side of
shelf. The Wire Wine Rack (B) simply sets on the shelf.
Wine Racks
12

f
Galaxy
0000
0
f
Hceand Water Dispenser Panel (features may vary according to model)
Crushed
Cubed
Light
On
Press the Crushed Touch Pad @ to get crushed ice. A red indicator wHHappear above the Touch Pad. Press
gHass against HCEdispensing paddHe@as far up as possibHe to catch aHHice.
get cubed ice. A red indicator wiHHappear above the Touch Pad. Press gHass
as far up as possibHe to catch aHHice.
Press the Light On Touch Pad @ to turn on dispenser Hight.A red indicator wiHHappear above the Touch Pad.
L{ght Press the Light Off Touch Pad _ to turn off dispenser Hight. A red indicator wiHHappear above the Touch Pad.
Off
WATER A
To operate the water dispenser, press a gHass againstAthe WATER dispensing paddHe _. To stop dispensing
water, puil the glass away from the dispensing paddle Q . Dispensed water is not cold. For colder water, add
crushed ice or cubes before dispensing water. A drip tray located at the base of the dispenser catches small
spiHHsand aHHowsthem to evaporate. This drip tray is removabHe and dishwasher safe. Do not pour water and
excess ice in this area because there is no drain.
13

iCE AND WATER DISPENSER FEATURES
The iceand water dispenser conveniently dispenses chilled water, and ice cubes or crushed ice, depending on the model,
To operate the ice dispenser, select the ice option desired using the touchpad, Press a glass against the dispensing paddle
as far up as possible to catch all ice, To stop dispensing ice, pull glass away from dispensing paddle, Do not remove the
glass until the ice has completely dispensed, (Complete instructions for the dispenser operation are attached to the inside
of the freezer door,)
How the Water Dispenser Works
The water tank, located behind the drawers in the refrigerator compartment, automatically fills as water is dispensed, For
proper dispenser operation, the recommended supply water pressure should fall between 20 psi and 100 psi,
Water pressure must not exceed !00 Ibs, Excessive pressure may cause water filter to malfunction,
After the refrigerator is connected to the water supply, fill the water tank by drawing one glass of water, it may take about
11/2minutes after activating the dispenser paddle before water begins to fill this first glass, Continue flushing the system
for 8 minutes to rid the tank and plumbing connections of any impurities, The water dispenser has a built in shutoff device
that wiii stop the water flow after 8 minutes of continuous use, Simply release the dispenser paddle to reset the shutoff
mechanism, Chem!oa ef oo aJfunCt!on. go one cando,nagethemaker. fSheicemaker!eConnected
to soft water, ensure that the softener is maintained end working properly.
How the Ice Dispenser Works
The ice maker and container are located in the top of the freezer compartment, After the
o" refrigerator is installed properly and has cooled for several hours, the ice maker can begin
making ice within 24 hours, Air in new plumbing lines may cause the ice maker to cycle two
or three times before making a fuji tray of ice, Tobegin ice production, lower the wire signal
arm to the "down" or ON position, With no usage itwiii take approximately 2 days to fiii the
ice container, The ice maker turns off automatically when the ice container becomes full, To
s,_,,_rA..... stop the ice maker, lift the wire signal arm until it clicks, and locks in the "up" or OFF
position,
Because of new plumbing connections, the first production of ice cubes may be discolored
} _ or have an odd flavor,These should be discarded until the cubes made are free of discoloration
ice cubes stored too long may develop an odd flavor, Empty the ice container and ensure that the wire signal arm is
in its "down" or ON position, The ice maker will then produce more ice,
Occasionally shake the ice container to keep ice separated,
Keep the wire signal arm in its "up" orOFF position until the refrigerator is connected to the water supply or whenever the
water supply is turned off,
iMPORTANT: Your ice maker !Sshipped with the wire signal arm in the ON position,To ensure proper function of
and !ocks in the UP position. Ifthe icemaker is not turned off and the water supply is not connected, the water valve
will make a loud chattering noise.
the d!spensing padd!e is pushe d for more than 4 m!nutes, the d!sPensei motor may over!end
and stop. The overload protector wii[ reset automatically after 3or 4 minutes.
if a large quantity of ice is needed at one time, it is best to remove cubes directly from the ice container,
The following sounds are normal when the ice maker is operating:
Motor running * Running water
ice dropping into ice container o Stop the ice maker when cleaning the freezer and during vacations,
o Water valve opening or closing o if the ice maker will be turned off for a long period of time, turn the
o ice loosening from tray water supply valve to the closed position,
14

Donotusethe
ice chute as a
handle when
removing or
repmacing the
ice storage bin.
Surfaces there
may be sharp,
Do not put fingers up ice chute° Surfaces
there may be sharp°
J
CLEANING THE ICE DISPENSER
Clean the dispenser and ice container at regular intervals,
particularly before you take a vacation or move, or if the ice
dispenser sticks.
1, Stop ice production by Hfting the wire signaHarm to the "up" or
2, Remove ice container by Hfting up and out, Empty and
carefully dean the container with mild detergent, Rinse with
dear water, Do not use harsh or abrasive cleaners, AHow ice
container to dry compHeteHybefore replacing in the freezer,
3, Remove ice chips and clean the shelf and chute that supports
the ice container,
4, Replace the ice container, Lower the wire signal arm on the ice
maker to the "down" or ON position and the ice maker will
resume production,
mMPORTANT: When removing or repHacJngthe ice bin, do not
rotate the augerin the ice bin, Ifthe auger is accidental ytumed,
you must realign the auger by turning it in 90 °turns until the ice
bin fits into place with the drive mechanism,
Remove and empty the ice storage bin if:
1 An extended power failure tone hour or longer) causes ice
cubes in the ice storage bin to melt and freeze together and
jam the dispenser mechanism,
2 The ice dispenser is not used frequently, Ice cubes will freeze
together in the bin and jam the dispenser mechanism,
Remove the ice storage bin and shake to loosen the cubes,
NEVER use an ice pick or similar sharp instrument to break up
the ice, This could damage the ice storage bin and dispenser
mechanism,
15

Autemattc ice and Water Dispenser
Kenmore ice and Water Rear Filter (some models)
NOTE: [f you purchased a refrigerator with a Kenmore Ice and Water rear filter, please read the for[owing use and
care information. This ice and water filter system filters water to your ice maker and water dispenser, [t [s located [n the
upper right back comer of the fresh food compartment,
System Startup:
Water supply does not need to be turned off, however, do not use ice and water dispenser while installing filter.
The filter cartridge has already been installed [n the filter housing at the factory. Refer to the How The Water Dispenser
Works section to properly fir[ the system with water.
Changing the F#ter:
Water conditions vary throughout the world, but changing the water filter every
Order new filter cartridges through the
dealer where you bought the refrigerator,
or contact the Sears Pan, Direct at 1-800-
366-PART. It might be good to order some
filter cartridges when you first install your
refrigerator. Be sure to ask for the
Kenmore replacement cartridge 46 9910.
The Kenmore Ice and Water
Filter System NGRG 2000
with the Kenmore cartridge
RG 100 is tested and certified
by NSF International, the
nationally recognized and respected, not
for profit, certification organization for public
health safety. The Kenmore Filter system is
tested and certified to ANSI/NSF Standard
42. See performance data sheet for
specifications. This system should not be
used on water that is microbiotogically
unsafe or with water of unknown quality
unless the water has been adequately
disinfected before or after traveling through
the filtration system.
,, Rated Capacity - 400 gallons
,, Rated service flow- .5 GPM
,, Maximum Rated Pressure - 100 PSI
,, Maximum Operating Temp. - 100° F
6 - 9 months normally w[[[ ensure the highest possible water quality. The Filter
Status rightw[[[tum red after 400 gallons of water has flowed through the ice and
water dispenser. Also, [f the filter has been [na refrigerator that has not been [n
use for awhile (during moving for example), change the filter before reinstalling
the refrigerator. The dispenser system w[[[ also operate without filtration (with
filter cartridge removed).
To change filter:
[t [s not necessary to turn the water supply off to change the filter.
1. Open freezer door and reave open until filter change [s complete.
2. Set ice maker wire signal arm to the OFF (up) positron (See illustration on
page 14).
3. Hold filter cup firmly4and unscrew towards [eft (Some water could
leak out as you remove cup. This [s normal.). Filter cartridge should come
down with cup. [f cartridge remains [n housing, purrdown gentry, while
twisting filter back and forth.
4. Rinse out cup under running water.
5. The large o-r[ng that sears the filter system sets [nthe o-r[ng groove
down inside the cup. Should the o-r[ng fairout during filter cartridge
replacement, simply place [t back [n the groove prior to screwing the cup
back [n place. [f the o-r[ng becomes damaged, you w[[[ need to order one
from the Consumer Assistance Center.
6. Discard old fi[tercartr[dge.
7. Remove new filter cartridge from packaging and place [n cup. The end
with the small o-ring should be up, out of the cup.
8. Screw cup, with filter, back onto housing. Filter cartridge w[[[ serf-align as
cup [s tightened. Be sure cup [s completely tightened with Kenmore logo
facing outward. Do NotTighten Past Stop.
9. Set ice maker wire signal arm to the ON (down) positron.
10. Check for leaks. Open refrigerator door. Wipe any water droplets from the
filter cup. F[[[ a grass with water. [f there [s a leak, unscrew filter cup, and
re[nsert the filter cartridge. Check placement of large O-ring. Reinstall
filter cup, making certain [t [s tightened completely.
11. To condition filter system and purge air from water line, fir[ a grass with
water. Continue flushing the system for 3 minutes to assure that the
purest water possible [s stored [nwater tank.
IMPORTANT; Resetting The FHter Status Light (some models)
After replacing the filter Cartndge, [t w[[[ be necessary to press the Filter
Reset button located on the ice and water dispenser. This w[H reset the
Filter Status right, Push the reset button until the green, red and amber
rights flash (10q5 seconds). Please refer to the complete dispenser
operating instructions attached to the inside of the freezer door.
16

FOOD STORAGE iDEAS
Fresh Food Storage
The fresh food compartment shouUdbe kept between 34° F and 40° Fwith an optimum temperature of 37° R
Avoid overcrowding the refrigerator sheUves,This reduces the circuUation of air around the food and resuUtsin uneven
cooling,
Fruits and Vegetables
oStorage in the crisper drawers traps moisture to heUppreserve the fruit and vegetaMe quality for Uongertime periods,
Meat
• Raw meat and pouUtryshouUdbe wrapped secureUyso Ueakageand contamination of other foods or surfaces does
not occur,
Frozen Food Storage
oThe freezer compartment shouUdbe kept at 0° For Uower,
A freezer operates most efficientUy when it is at Ueast2/3 full,
Packaging Foods for Freezing
,, To minimize dehydration and quality deterioration, use aUuminumfoil, freezer wrap, freezer bags or airtight
containers, Force as much air out of the packages as possible and seal them tightly, Trapped air can cause food to
dry out, change color, and develop an off-flavor (freezer burn),
o Wrap fresh meats and poultry with suitable freezer wrap prior to freezing,
,, Do not refreeze meat that has completely thawed,
Loading the Freezer
o Avoid adding too much warm food to the freezer at one time, This overloads the freezer, slows the rate of freezing,
and can raise the temperature of frozen foods,
• Leave a space between the packages, so cold air can circulate freely, allowing food to freeze as quickly as
possible,
o Avoid storing hard-to-freeze foods such as ice cream and orange juice on the freezer door shelves, These foods are
best stored in the freezer interior where the temperature varies less,
/
ENERGY SAVING mDEAS
Locate the refrigerator in the coolesl part of the room out of direcl
sunlight, and away from heating ducts or regusters, Do not place the
refrigerator next to heat-producing appliances such as a range, oven, or
dishwasher, If this is not possible a section of cabinetry or an added
layer of insulation between the two appliances will help the refrigerator
operate more efficiently,
o Level the refrigerator so that the doors close tightly
• Refer to this Use & Care Manual for the suggested temperature control
settings,
• Periodic cleaning of the condenser will help the refrigerator run more
efficiently, See the Care and Cleaning Charton page 19,
Do not overcrowd the refrigerator or block cold air vents, Doing so
causes the refrigerator to run longer and use more energy"
Cover foods and wipe containers dry before placing Ihem in the
refrigerator, This cuts down on moisture build-up inside the unit,
Organize the refrigerator to reduce door openings, Remove as many
items as needed at one time and close the door as soon as possible,
17

Normal Operating sounds&Sights
UNDERSTANDING THE SOUNDS YOU MAY
HEAR
Your new high-efficiency refrigerator may make unfamiliar
sounds, These are aii normal sounds and soon wiii
become familiar to you, They also indicate your refrigerator
is operating as designed, Hard surfaces, such as vinyl or
wood floors, walls, and kitchen cabinets may make
sounds more noticeable, Listed below are descriptions of
some of the most common sounds you may hear, and
what is causing them,
NOTE:R!g!d foam insulation iSvery energy efficbnt,
but is not a sound insuiator,
A. Evaporator
The flow of refrigerant through the evaporator may
create a boiling or gurgling sound.
B. Evaporator Fan
You may hear air being forced through the refrigerator
by the evaporator fan, Also, you wiii feel warm air
being pushed out the front of the refrigerator from
under theToe Grille,
C. Defrost Heater
During defrost cycles, water dripping onto the defrost
heater may cause a hissing or sizzling sound. After
defrosting, a popping sound may occur.
mMpORTANT: Dur!ng the automatic defrost cycle, you
may not!ce a red glow in the vents on the back wail of
your freezer compartmenL This is normai during the
defrost cyde.
D. Automatic ice Maker
if your refrigerator is equipped with an automatic ice
maker, you will hear ice cubes falling into the ice bin,
E. Cold Control & Automatic Defrost Control
These parts can produce a snapping or clicking sound
when turning the refrigerator on and off,
F. Condenser Fan
You may hear air being forced through the condenser
by the condenser fan.
G. Compressor
Modern, high-efficiency compressors operate much
faster than older models. The compressor may have a
high-pitched hum or pulsating sound.
H. Water Valve
if your refrigerator is equipped with an automatic ice
maker, you will hear a buzzing sound as the water
valve opens to fill the ice maker during each cycle,
to Drain Pan (not removable)
You may hear water running into the drain pan during
the defrost cycle,
Jo Condenser
18

care &Cleanm#
Keep your refrigerator and freezer dean to prevent odor build-up. Wipe up any spHUsimmediateUy and dean both sections
at Ueasttwice a year. Never use metallic scouring pads, brushes, abrasive cleaners or strong aUkaHnesoUutions on any
surface. Do not wash any removaMe parts in a dishwasher. Always unplug the electrical power cord from the wall
outlet before Meaning.
When moving the refrigerator, pull straight out. Do not shift the refrigerator from side to side as this may
damage the floor. Be careful not to move the refrigerator beyond the plumbing connections.
- Damp objects stick to cold metal surfaces. Do not touch refrigerated surfaces with wet or damp hands.
o To avoid damage and heJpthe refrigerator run as efficiently as possibJe, clean the condenser periodically.
NOTES:
Turning the freezer and fresh food controls to "0" turns off the compressor, but does not disconnect electrical
power to the lig htbulb or other electrical components.To turn off power to your refrigerator, you must unplug the
power cord from the wall outlet.
Do not use razor blades or other sharp instruments which can scratch the appliance surface when removing
adhesive labels. Any glue left from tape or labels can be removed with a mixture ot warm water and mild
detergent, or.touch the glue residue with the sticky side oftape you have already removed. Do not remove the
serial plate.
Care & Cleaning Chart
Part Cleaning Agents Tips and Precautions
Interior/Door •Soap and water Use 2 tablespoons of baking soda in 1 quart of warm water. Be
Liner •Baking soda and sure to wring excess water out of sponge or cloth before
water cleaning around controls, light bulb or any electrical part.
Door Gaskets .Soap and water Wipe gaskets with a clean soft cloth.
Drawers/Bins •Soap and water Do not wash any removable items (bins, drawers, etc.) in
dishwasher.
Glass •Soap and water Allow glass to warm to room temperature before immersing in
Shelves •Glass cleaner warm water.
•Mild liquid sprays
Toe Grille • Soap and water Vacuum dust from front of toe grille. Remove toe grille (See
•Mild liquid sprays illustration on page 6). Vacuum backside and wipe with sudsy
•Vacuum attachment cloth or sponge. Rinse and dry.
Exterior and •Soap and water Do not use commercial household cleaners, ammonia, or alcohol
Handles to clean handles.
Exterior and
Handles •Soap and water Clean stainless steel front and handles with soapy water. Use
(Stainless •Ammonia ammonia on stubborn spots. Use a non-abrasive stainless steel
Steel Models •Stainless Steel cleaner. These cleaners can be purchased at most home
Only) Cleaners improvement or major department stores.
Condenser •Vacuum attachment Use the dusting tool attachment on your vacuum to remove dust
Coils build-up on the condenser coils (see item "J" in illustration on page
18 for location).
19

Care & Cleaning (continued)
Wear gJoves when replacing light
bulbs to avoid getting cut.
REPLACING LmGHT BULBS
t, UnpHugrefrigerator,
2, Wear grieves as protection against possiMe broken
gHass.
3. Remove Hght cover if necessary.
4. Unscrew and repUacecudbuUbwith an appliance buHb
of the same wattage.
5. RepHaceHightcover, if necessary.
6. Remember to plug the refrigerator back in. Refrigerator Light Replacement
Located Behind Right
Crisper Light Replacement (Some Models) Freezer Light Replacement
Vacation and Moving Tips
Short
Vacations
Long
Vacations
•Leave refrigerator operating during vacations of 3 weeks or less.
•Use all perishable items from refrigerator compartment.
•Turn automatic ice maker off, even if you will only be gone for a few days.
•Remove all food and ice if you will be gone one month or more.
•Turn controls to "0" (the OFF position) and disconnect power.
•Turn off automatic ice maker and turn water supply valve to closed position.
•Clean interior thoroughly.
•Leave both doors open to prevent odors and mold build-up. Block doors open if
necessary.
•Remove all food and ice.
•If using handcart, load from side.
Moving •Adjust rollers all the way up to protect them during sliding or moving.
•Pad cabinet to avoid scratching surface.
iMPORTANT: If the refrigerator is going to be stored or moved in freezing temperatures, the water in
the ice and water system must be drained completely. Failure to do so could result in water leaks when
the refrigerator is put back into service. Contact a service representative to perform this operation.
2O