Kenroy Home 51050CON Installation guide

Care and Instruction Manual
PEDESTAL OUTDOOR BIRD BATH

51050CON ASSEMBLY INSTRUCTIONS51050CON ASSEMBLY INSTRUCTIONS
on a soft surface when unpacking.
When assembling ensure that all
Place base (B) onto level surface.
Option: Fill base (B) with sand (not included) to add
extra weight.
Place bird bath (A) onto base (B) and rotate it to secure.
Fill bird bath (A) with 1 gallon of distilled water.
Please reference the separate parts list and ensure that
all pieces are included in the package prior to assembly.
Thank you for purchasing a Kenroy Home
water feature, you are now only minutes
space with peaceful displays. Our guarantee
backs all of our water features, please do
not hesitate to contact our
Customer Support Team for
resolutions to any parts or
installation concerns.
CUSTOMER SUPPORT TEAM
For any additional questions or concerns please contact our
Customer Support Team:
904-642-4340
@KenroyHome
[e-mail]

• Do not place the water feature on or near
any surface that can be damaged by water.
• Keep small children and pets away from the water
feature; they can fall into the water feature and drown.
• Once a week inspect water feature, oor and adjacent
wall for moisture build-up and clean as necessary. This is
especially important for humid environments.
• This water feature is designed for outdoor use. It can be
used indoors, however splashing may occur.
More information about water features can be found at
youtube.com/kenroyhomefountains.
What should I consider when selecting a water feature?
In addition to your personal style tastes, be sure you have
an area for your water feature that can be safely exposed to
water, as splashing can occur.
Can my water feature be left outside over winter?
This water feature is rated for outdoor use; however
certain weather conditions may adversely aect your
water feature. If the temperature in your region is at risk
of dropping below 33° F, your water feature should be
“winterized” before the cold weather arrives.
To winterize:
1. Fully drain your water feature of all water.
2. Clean all components thoroughly to prevent residue
build-up.
3. Allow all parts to dry.
4. Store parts and water feature in a safe, weather-free
environment.
How do I clean my water feature?
Oils, dirts, and algae can all build up on the water feature
over time. The best way to restore your water feature to
its original state is to empty all the water from the water
feature and use a mild soap (like dish detergent) and a
soft acrylic brush to clean all the parts.
51050CON
ASSEMBLY INSTRUCTIONS
WATER FEATURE WARNINGS &
TROUBLESHOOTING
FREQUENTLY ASKED QUESTIONS
51050CON
ASSEMBLY INSTRUCTIONS
• Distilled water is recommended to reduce mineral
deposits, bacteria build up and algae that may damage
the water feature basin.

How often will I need to ll my water feature?
Over time, the water level in your water feature will recede.
This is due to evaporation and the speed at which your
water feature will need to be lled depends greatly on your
environment- the humidity, if your water feature is in
the sun, how often animals use the water feature, etc.
I cannot nd my installation instructions. Where can
I nd another copy?
Installation and assembly instructions can be found online
at www.kenroyhome.com
How do I level the water feature?
If your water feature will be placed in an area with uneven
ground, use a level and leveling shims to help level the
water feature. Shims are wedge-shaped plastic parts that
can be placed between the water feature and the ground
to create a level surface.
FREQUENTLY ASKED QUESTIONS CONTINUED
51050CON
ASSEMBLY INSTRUCTIONS
51050CON
ASSEMBLY INSTRUCTIONS

www.kenroyhome.com