KENT 12017 User manual

INSTRUCTION MANUAL
Marketed by:
KENT RO SYSTEMS LTD.
E-6, 7 & 8, Sector-59, Noida, U.P.-201 309, India.
E-mail: [e-mail] | Website: www.kent.co.in
Manufactured by:
KENT RO SYSTEMS LTD.
A-6, Sector-87, Noida-201 305, U.P., India.
E-mail: [e-mail]
For customer complaints, contact Customer Care Officer at:
E-6, 7 & 8, Sector-59, Noida, UP-201 309, India. Call: 92-789-12345
E-mail: [e-mail] or visit us at www.kent.co.in
TOUCHLESS
SOAP DISPENSER
Tank
Capacity
1000ml

Dear Customer,
At the outset, allow us to thank you for your trust in KENT. We
take pride in our reputation for product quality and industry
proven performance. We are certain that your decision to own
a KENT Touchless Soap Dispenser will go a long way towards
keeping you and your employees in good hygiene and health.
We are confident that you will be satisfied with its
performance and that it will serve your need for safer
premises without any compromise on hygiene and
cleanliness.
This guide will help you in getting the best out of your
KENT Touchless Soap Dispenser. Please go through this
booklet to familiarise yourself with its operation and
maintenance.
Best Wishes,
KENT RO SYSTEMS LTD.
1. KENT Touchless Soap Dispenser 1
2. Features 1
3. Know Your Product 1
4. Items in the Box 1
5. Installation Instructions 2
6. Indicator Lights 3
7. Cleaning & Maintainance 3
8. Important Safety Instructions 3
9. Technical Specifications 4
TABLE OF CONTENTS

1 2
KENT Touchless Soap Dispenser
KENT proudly presents KENT Touchless Soap Dispenser, which will
go a long way towards keeping you and your family in good hygiene
and health. We are confident that you will be satisfied with its
performance and that it will serve your need for better hygiene and
cleanliness.
FEATURES
• Translucent container for liquid soap
• High storage capacity of 1000 ml
• Single and double
dispense option
• Removable liquid soap container for cleaning and easy refilling
• Fully automatic and touchless use for hands-free operation
• Works with both batteries & adapter
• Wall-mountable
KNOW YOUR PRODUCT
ITEMS IN THE BOX
1. KENT Touchless Soap Dispenser : 1 N
2. Screw Bag with Key : 1 N
3. Warranty Card : 1 N
INSTALLATION INSTRUCTIONS
Installation Procedure
APacking List
4X 4X 1X
* keep away from sunshine and
humid place
CHeight from Floor/Table
Recommended Installation Height
≥50”
(≥127cm)
≥16”
(≥40cm)
Installation with Screws
DWay for Screw
LED Light of water level indicate:
Sensing Distance: 8-12cm
4 Pcs Batteries
(1.5V*4Pcs,
Size C)*
Dc Adapter
(6v,1A,Optional)
1. Double-sided adhesive *
(Optional)
2. Silicone sealant *
1. green color 5 seconds flush: working condition
2. red color 5 seconds flush: low power for battery and change
3. red color 2 seconds flush: something under sensor and remove it
Fill liquid for
refillable bottle
Change directly
for disposable
Install Batteries Installation with Adhesive Backing
(no screws)
GFill Liquid HEnjoy hand washing
E*The Standard in not including
DC Adapter and Batteries F*The Standard in not including Dual-Sided
adhesive and silicone sealant
LED Light
1. Soap: Gel or Soap Liquid
Key
Bottom
Shell
Frame
Speed 1
Speed 2
ON/OFF
Battery
Cover
Nozzle
Front Shell
Indicator
Switch
(ON/OFF)
Sensor
Window
Refillable
Bottle
Bottle Cap
SOAP
BPart Name
1. Soap: Gel or Soap Liquid
Key
Bottom
Shell
Frame
Speed 1
Speed 2
ON/OFF
Battery
Cover
Nozzle
Front Shell
Indicator
Switch
(ON/OFF)
Sensor
Window
Refillable
Bottle
Bottle Cap
SOAP

INDICATOR LIGHTS
There are 2 operation modes-single dispense mode & double dispense
mode. These modes can be activated by pressing respective buttons.
• Green light: single dispense
• Red light: double dispense
Note: Sensing Distance: 8-12cm
CLEANING & MAINTENANCE
• After starting to use the machine, if it is left unused for many
days, the evaporation of water in the pipeline will cause the liquid
soap to coagulate, which will have a certain impact on the pump.
It is advised to store the liquid soap bottle seperately from the
machine
• If the machine has not been maintained for more than 3 months,
then the pump may not function properly in such case remove
the bottle, open the cap, and pour warm water around 40°C
into the bottle. (warm water at about 40°C has a better chance
of dissolving the sticky stuff in pipes). Put the liquid bottle back
on the machine and start using it as usual until water comes
out of the outlet. Repeat 10-15 times for better results
IMPORTANT SAFETY INSTRUCTIONS
• Do not place the product on places that are subject to vibration
or shock, such as on a wobbling table or an unstable tilted place
• Do not bump, apply excessive force, or scratch. It may cause
damage
• Do not wipe the main unit with thinner or benzene. It may cause
deformation or discoloration
• Do not install the product in a place close to fluorescent lamps
expose it to strong light. It may cause malfunctioning
• Make sure that the sensor unit is not exposed to liquid. The
sensor may stop responding. In case you choose not to use the
unit for an extended period of time, empty the container of
liquid
soap
• In case of no use, clean the dispenser and remove the batteries.
Store it in a dry place
•
liquid soap works best with this soap dispenser
3 4
Product : KENT Touchless Soap Dispenser
Product Code : 12017
Product Generic Name : Soap Dispenser
Product Colour : White
Mounting : Wall Mountable
Input Power Supply : 6 V, 4 Nos. C 1.5V Batteries (Not Included)
Capacity : 1000 ml
Dispensing Qty. : Adjustable amount
Net Weight : 0.78 kg
Product Dimensions (mm) : 120 (L) X 117 (W) X 260 (H)
Total Power Consumption : 1.2 W
TECHNICAL SPECIFICATIONS
Battery Safety
• Do not mix the old batteries with the new ones
• Do not use rechargeable batteries as it may affect the proper
functioning of the unit
• Please remove the batteries if the unit is not being used for a
long time
• Batteries are small objects and must be replaced by an adult
• Use appropriate batteries, 4 Nos. C 1.5V Batteries