PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
The appliance does
not start.
There is connection problem. Check if the appliance is
connected to the mains and if
the plug is inserted firmly into
the wall socket.
The jar is not placed properly.
The appliance is defective.
Switch off the appliance and
unplug it. Go to the nearest
KENT authorized service centre
for assistance.
The appliance suddenly
stops working while
running.
The appliance has overheated. Let the appliance cool for 20 - 30
minutes.
The appliance is overloaded. Remove some ingredients, add
some water and try again.
The appliance is defective.
Switch off the appliance and
unplug it. Go to the nearest
KENT authorised service centre
for assistance.
The appliance make
slots of noise.
The jar is not placed properly. Reposition the jar in the correct
position.
The blender’s inner drive is
broken.
Switch off the appliance and
unplug it. Go to the nearest
KENT authorised service centre
for assistance.
Motor does not work
properly. The appliance is defective.
Switch off the appliance and
unplug it. Go to the nearest
KENT authorised service centre
for assistance.
