Kenwood PAD-iP7 User manual

© B60-5793-08/00 (E, X)
D.A.P. LINK with Universal Dock for iPod
PAD-iP7
INSTRUCTION MANUAL
Declaration of Conformity with regard to the EMC Directive
2004/108/EC
Manufacturer:
Kenwood Corporation
2967-3 Ishikawa-machi, Hachioji-shi, Tokyo, 192-8525 Japan
EU Representative's:
Kenwood Electronics Europe BV
Amsterdamseweg 37, 1422 AC UITHOORN, The Netherlands
ENGLISH FRANÇAIS DEUTSCH NEDERLANDS ITALIANO ESPAÑOL
B60-5793-08-00English.indd1 08.8.271:09:17PM

PAD-iP7 2English
3
6. Power Sources – This product should be operated
only from the type of power source indicated on the product.
If you are not sure of the type of power supply to your home,
consult your product dealer or local power company.
7. CAUTION –Polarization – This product may
be equipped with a polarized alternating-current line
plug (a plug having one blade wider than the other).
This plug will t into the power outlet only one way. This
is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug
should still fail to t, contact your electrician to replace
your obsolete outlet. Do not defeat the safety purpose
of the polarized plug.
8. Power Cord Protection – Power-supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs,
convenience receptacles, and the point where they exit
from the product.
9. Lightning – For added protection for this product
during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from
the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to
lightning and power-line surges.
10.Overloading – Do not overload wall outlets,
extension cords, or integral convenience receptacles as
this can result in a risk of re or electric shock.
11.Object and Liquid Entry – Never push objects of
any kind into this product through openings as they
may touch dangerous voltage points or short-out parts
that could result in a re or electric shock. Never spill
liquid of any kind on the product.
12.Servicing – Do not attempt to service this product
yourself as opening or removing covers may expose you
to dangerous voltage or other hazards. Refer all servicing
to qualied service personnel.
13.Damage Requiring Service – Unplug this product
from the wall outlet and refer servicing to qualied
service personnel under the following conditions:
a) When the power-supply cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen
into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by
following the operating instructions.
e) If the product has been dropped or damaged in
any way, and
f) When the product exhibits a distinct change in
performance – this indicates a need for service.
g) If an abnormal smell or smoke is detected.
14.
Replacement Parts – When replacement parts
are required, be sure the service technician has used
replacement parts specied by the manufacturer or have
the same characteristics as the original part. Unauthorized
substitutions may result in re, electric shock, or other
hazards.
15.Safety Check – Upon completion of any service
or repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
16.Wall or Ceiling Mounting – This product should be
mounted to a wall or ceiling only as recommended by
the manufacturer.
17.Heat – This product should be situated away from
heat sources such as radiators, heat registers, stoves,
or other products that produce heat. Do not place a
aming object, such as a candle or lantern, or near the
product.
18.Power Lines – An outside antenna system should
not be located in the vicinity of overhead power lines
or other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken
to keep from touching such power lines or circuits as
contact with them might be fatal.
19.Outdoor Antenna Grounding – If an outside
antenna or cable system is connected to the product, be
sure the antenna or cable system is grounded so as to
provide some protection against voltage surges and built-
up static charges. Article 810 of the National Electrical
Code, ANSI/NFPA 70, provides information with regard to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
I
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC – NATIONAL ELECTRICAL CODE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
ANTENNA
LEAD IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
GROUND CLAMPS
Notes:
1. Item 7 is not required except for grounded or
polarized equipment.
2. Item 19 complies with UL in the U.S.A.
Before applying power
¤Caution : Read this page carefully to
ensure safe operation.
Units are designed for operation as follows.
Australia ........................................................... AC 240 V only
Europe .............................................................. AC 230 V only
Safety precautions
WARNING : TO PREVENT FIRE
OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
IMPORTANT SAFETY
INSTRUCTIONS
¤ Caution : Read this page carefully to
ensure safe operation.
Read Instructions – All the safety and operating
instructions should be read before the product is
operated.
Retain Instructions – The safety and operating
instructions should be retained for future reference.
Heed Warnings – All warnings on the product and in
the operating instructions should be adhered to.
Follow Instructions – All operating and use
instructions should be followed.
1. Cleaning – Unplug this product from the wall outlet
before cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
2. Attachments – Do not use attachments not
recommended by the product manufacturer as they
may cause hazards.
3. Water and Moisture – This product shall not be
exposed to dripping and splashing – for example, near
a bath tub, wash bowl, kitchen sink, or laundry tub; in
a wet basement; or near a swimming pool; and the
like. Do not place an object containing liquid, such as a
ower vase, on the appliance.
4. Accessories – Do not place this product on an
unstable cart, stand, tripod, bracket, or table. The
product may fall, causing serious injury to a child or
adult, and serious damage to the product. Use only with
a cart, stand, tripod, bracket, or table recommended
by the manufacturer. Any mounting of the product
should follow the manufacturer’s instructions, and
should use a mounting accessory recommended by the
manufacturer.
A product and cart combination should
be moved with care. Quick stops,
excessive force, and uneven surfaces may
cause the product and cart combination
to overturn.
5. Ventilation – Slots and openings in the cabinet are
provided for ventilation and to ensure reliable operation
of the product and to protect it from overheating,
and these openings must not be blocked or covered.
The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation
such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been
adhered to.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-
SERVICEABLE PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH ARROWHEAD
SYMBOL, WITHIN AN EQUILATERAL TRI-
ANGLE, IS INTENDED TO ALERT THE USER
TO THE PRESENCE OF UNINSULATED “DAN-
GEROUS VOLTAGE” WITHIN THE PRODUCT’
S ENCLOSURE THAT MAY BE OF SUFFICIENT
MAGNITUDE TO CONSTITUTE A RISK OF
ELECTRIC SHOCK TO PERSONS.
THE EXCLAMATION POINT WITHIN AN EQUI-
LATERAL TRIANGLE IS INTENDED TO ALERT
THE USER TO THE PRESENCE OF IMPORTANT
OPERATING AND MAINTENANCE (SERVIC-
ING) INSTRUCTIONS IN THE LITERATURE AC-
COMPANYING THE APPLIANCE.
B60-5793-08-00English.indd2-3 08.8.271:09:18PM

PAD-iP7 4English
5
Contents
Caution : Read the pages marked ¤carefully to
ensure safe operation.
Accessories
Dock adapters (5 types)
Used to connect an iPod. (Page 7)
D.AUDIO connection cable
(4-pole miniplug − 4-pole miniplug)
Video connection cable
(4-pole miniplug − RCA video/audio plug)
AC adapter
(Europe: AC-050140A)
(Australia: AS070-050-DM)
Before use
iPod are trademarks of Apple Inc., registered in the U.S. and
other countries.
YCb Cr
AUDIO/
VIDEO
DC IN
COMPONENT VIDEO
D.AUDIO



¡iPod dock
Mount your iPod on this unit by means of one of the
supplied dock adapters or the dock adapter supplied
with your iPod.
™Power indicator
The indicator lights blue when the unit is on.
£DC IN terminal (5V DC)
Connect the supplied AC adapter to this terminal.
The model name label at the bottom of this unit
indicates the power-related information including the
supply voltage and polarity. Be sure to check them
before connecting the AC adapter.
¢COMPONENT VIDEO output connectors
(Y/Cb/Cr)
To monitor the video from the iPod, connect a TV or
AV amplier equipped with component video input
connectors to these connectors.
∞AUDIO/VIDEO (COMPOSITE) output connector
Connect the Audio/Video input connectors of an AV
amplier or TV to this terminal.
§D.AUDIO control terminal (D.AUDIO)
Connect an audio component compatible with the
input to a Kenwood digital audio player.
¶ Video selector switch
Select the video signal output between the
COMPONENT VIDEO output connectors [¢] and the
AUDIO/VIDEO (COMPOSITE) output connector [∞].
Top view Back view
Bottom view
Model name label
Component names and functions
Operating precautions
Installation
Observe the following precautions when installing the
equipment.
• If this product is used near a radio, TV or cellular phone, it may
become a source of reception interference. Please use this
product at a certain distance from them.
• If heat radiation is insufficient, buildup of heat inside the
product may cause malfunction or a fire hazard. Do not cover
the product with a cloth or place an obstacle to heat radiation
at the top of the product.
Maintenance
When this product gets dirty, wipe it with a soft, dry cloth.
Do not use lacquer thinner, benzene or alcohol as these
substances may discolor the finish.
Contact revitalizer
Do not use a contact revitalizer as it may become a cause of
malfunction.
Particularly, a contact revitalize containing oil may deform plastic
parts of the product.
Before applying power...................................2
Safety precautions......................................................................2
IMPORTANT SAFETY INSTRUCTIONS ............2
Before use .......................................................4
Operating precautions.............................................................4
Accessories......................................................................................4
Component names and functions.................5
Connections ....................................................6
Mounting the iPod .........................................7
Controlling the iPod ......................................8
In case of diculty..........................................9
Specications..................................................9
• The apparatus and AC/DC adaptor shall not be
exposed to dripping or splashing and that no
objects filled with liquids, such as vases, shall be
placed on apparatus and AC/DC adaptor.
• To be completely disconnect the power input,
the AC/DC adapter shall be disconnected from
the mains, as the disconnect devices in the
AC/DC adaptor.
• The AC/DC adapter should not be obstructed OR
should be easily accessed during intended use.
• The marking information is located at the bottom
of apparatus.
CAUTION
Notes on AC adapter
B60-5793-08-00English.indd4-5 08.8.271:09:19PM

PAD-iP7 6English
7
Y
COMPONENT VIDEO INPUT
Cb Cr
L R VIDEO
AV INPUT
YCb Cr
AUDIO/
VIDEO
DC IN
COMPONENT VIDEO
D.AUDIO
Connections Mounting the iPod
To AC wall outlet
• Insert the plug firmly all the
way into the AC wall outlet.
Connect to the AV input connectors
of an AV amplier or TV.
Connect to the component
video input connectors of a
TV, etc.
Audio component compatible
with the input to Kenwood digital
audio player.
Connect to the D.AUDIO
input terminal.
D.AUDIO connection cable
(supplied)
Video connection cable (supplied)
Video connection cable (commercially available)
AC adapter (supplied)
White Red Yellow
1. Select the dock adapter.
This unit comes with 5 types of dock adapters. Use the dock
adapter matching you iPod.
7
Adapter number
Dock adapter back view
Compatibility of iPod adapter
iPod description Capacity Adapter number
iPod mini 4 GB & 6 GB 3
4G iPod & U2 iPod 20 GB 4
4G iPod 40 GB 5
iPod photo & Color U2 iPod 20 GB & 30 GB 6
iPod with color display 20 GB 6
60 GB 7
iPod photo 40 GB & 60 GB 7
⁄
• If your iPod is supplied with a dock adapter, use the supplied
dock adapter.
2. Connect the iPod adapter.
Hold the dock adapter so that the side with a slit is away from
you, then push fit the dock adapter into this unit until it clicks.
To remove iPod adapter
Insert a thin object such as the tip of a flat-blade screwdriver
into the slit on the dock adapter and lift it to remove.
3. Connect your iPod.
The iPod cannot be connected together with its accessories
such as the cover or case. Be sure to remove any accessories
before connecting the iPod.
⁄
• If the iPod is mounted on this unit without using a dock
adapter, the connector section may be degraded or
destroyed.
• Be sure to use a dock adapter.
• Always insert or remove the iPod gently.
• The mounted iPod can be recharged from this unit.
Supported iPod
iPod description
iPod mini
4G iPod & U2 iPod
4G iPod
iPod photo & Color U2 iPod
iPod with color display
iPod photo
iPod nano
5G iPod (with video)
U2 iPod with video
iPod classic
iPod nano (2nd generation)
iPod nano (3rd generation)
iPod touch
⁄
• Be sure to update the software of your iPod to the latest
version.
• The iPod cannot be connected together with its accessories
such as the cover or case. Be sure to remove any accessories
before connecting the iPod.
• Video output setting of iPod needs to be set on your iPod.
• When the iPod is detached from the iPod dock, the TV Out
setting of the iPod may sometimes be set to On. Check this
setting if the iPod cannot display video.
Always use the specified AC adapter model "Europe: AC-050140A, Australia: AS070-050-
DM" with this unit. To prevent a fire or electric shock hazard, do not use an AC adapter
other than the one specified.
Install the equipment so that the AC wall outlet is easily accessible from you, and
disconnect the AC adapter from the AC wall outlet immediately in case of emergency.
Note that this unit does not have the power switch and is therefore not insulated
completely from the power supply. For complete insulation, it is required to disconnect
the AC adapter from the AC wall outlet.
• Do not connect the AC adapter to the AC wall outlet until all other connections are complete.
Before disconnecting a cord or cable, be sure to turn the other components off and disconnect
the AC adapter from the AC wall outlet.
WARNING
CAUTION
B60-5793-08-00English.indd6-7 08.8.271:09:20PM

PAD-iP7 8English
9
If a trouble such as the impossibility of switching the power
on or operating occurs, check the description of applicable
symptom in the following list before calling for service.
Symptom Cause/Remedy
The power
cannot be
switched ON.
The AC adapter may be connected
improperly.
Connect it properly. (Page 6)
iPod cannot be
fit properly into
the unit.
A wrong dock adapter may be used.
Check if the correct dock adapter is
used. (Page 7) Also check the connector
sections of the iPod and this unit, then
reconnect them properly.
The iPod audio
cannot be
monitored.
The iPod may be connected improperly.
Remove the iPod from this unit and
mount it again. (Page 7)
The iPod cannot
be recharged.
The iPod may be connected improperly.
Remove the iPod from this unit and
mount it again.(Page 7)
The iPod video
cannot be
monitored.
The video selector switch may be set
improperly.
Set it according to the connected
component.(Page 5)
The video connection cable may be
connected improperly.
Check the connection of this unit.
(Page 6)
In case of diculty Specications
Power..................DC 5 V (AC adaptor: AC 230 - 240 V, 50 Hz)
Video output format.......................................................... NTSC/PAL
Composite video output level .............................1 Vp-p / 75 
Component video output level
Y-signal......................................................................1 Vp-p / 75 Ω
CB/ CR-signal.....................................................0.7 Vp-p / 75 Ω
Dimensions .........................................................................W : 103 mm
H : 31 mm
D : 65 mm
Weight (net)......................................................................................120 g
Notes:
• Kenwood follows a policy of continuous advancements in
development. For this reason specifications may be changed
without notice.
Controlling the iPod
When an audio component compatible with the input to
Kenwood digital audio player is connected to this unit, the
iPod can be controlled from the audio component or its
remote control unit. Please also read the instruction manual
for the connected audio component.
1. Mount an iPod on this unit.
2. Press the [iPod/D.AUDIOE] or
[D.AUDIOE] button of the audio component
to start playback of the iPod.
Operations during iPod playback
Pause/ resume playback
Press the [iPod/D.AUDIOE] or [D.AUDIOE]
button.
Fast forward/ fast reverse
Press and hold the [G] or [H] button.
Skip forward/ skip backward/ skip to the
beginning of current track
To skip a track backward or forward: Press the
[G] or [H] button.
To skip to the previous track : Press the [G]
button successively twice or more.
To return to the beginning of the current track:
Press the [G] button once.
To select a album
To skip to the previous album: Press the [PREV.],
[MULTI CONTROL %] or [FOLDER %] button.
To skip to the next album: Press the [NEXT],
[MULTI CONTROL fi] or [FOLDER fi] button.
The operation varies depending on the model of iPod.
Model other than iPod touch iPod touch
The operation is available when one
of the following items is selected.
Browse item Selection
Artists, Composers All Albums
Albums, Compilations All Songs
Genres All Artists
The album is switched to the next album
found by following the alphabetical
order of track names.
– Example Track-A1...... Album-A
Track-B1...... Album-B
Track-B2...... Album-B
Track-C1...... Album-C
⁄
• Before mounting or removing the iPod, be sure to minimize
the volume level of the connected audio component.
• The volume setting made on the iPod are invalid while it is
mounted on this unit.
• If the volume of the iPod is felt louder or lower than other
sources, adjust the input level from the connected audio
component.
• Do not remove the iPod in the middle of playback. Otherwise,
malfunction may result.
• Some of the iPod functions may not be controllable
depending on the iPod model.
• Audio components compatible with digital audio player link:
AX-7, AX-8, C-707i, K-501USB, K-511USB, RD-K501USB,
RD-K511USB, R-K1, R-K1000, R-K711 (as of September 2008)
Information on Disposal of Old Electrical and
Electronic Equipment and Batteries (applicable
for EU countries that have adopted separate
waste collection systems)
Products and batteries with the symbol
(crossed-out wheeled bin) cannot be disposed
as household waste.
Old electrical and electronic equipment and
batteries should be recycled at a facility capable
of handling these items and their waste
byproducts.
Contact your local authority for details in
locating a recycle facility nearest to you.
Proper recycling and waste disposal will help
conserve resources whilst preventing
detrimental effects on our health and the
environment.
Notice: The sign “Pb”below the symbol for
batteries indicates that this battery
contains lead.
B60-5793-08-00English.indd8-9 08.8.271:09:21PM

For your records
Record the serial number, found on the bottom of the unit,
in the spaces designated on the warranty card, and in the
space provided below. Refer to the model and serial numbers
whenever you call upon your dealer for information or
service on this product.
Model Serial Number
B60-5793-08-00English.indd10 08.8.271:09:21PM