Kenwood NXR-1700 Parts list manual

© 2023
NXR-1700
NXR-1800
Function Reference (FUNC)
Version: 2.00
Last Updated: July 19, 2023
Language: English
Type: E

1
FUNC (E)/ Ver 2.00
CONTENTS
CONTENTS ...........................................................................................................................................................1
OUTLINE................................................................................................................................................................ 5
About This Manual..............................................................................................................................................5
Abbreviations Used in this Document................................................................................................................. 7
About Copyright..................................................................................................................................................8
Outline of This Repeater.....................................................................................................................................9
General Features..............................................................................................................................................10
About Options to Use the Functions Described in This Document ...................................................................15
About HUB........................................................................................................................................................17
Revision History................................................................................................................................................18
Contents by purpose.........................................................................................................................................19
1FUNCTIONS AND PANEL LAYOUT .............................................................................................................23
1.1 Front ......................................................................................................................................................23
1.2 Rear .......................................................................................................................................................24
1.3 OLED display.........................................................................................................................................27
1.4 LED........................................................................................................................................................49
1.5 KNOB.....................................................................................................................................................51
2GETTING STARTED.....................................................................................................................................52
2.1 Connecting the Repeater to a PC ..........................................................................................................52
2.2 Writing the Configuration Data to the Repeater .....................................................................................53
2.3 Reading the Configuration Data from the Repeater ...............................................................................57
2.4 System Structure ...................................................................................................................................58
3BASIC OPERATION .....................................................................................................................................75
3.1 Turning the Repeater On/ Off................................................................................................................. 75
3.2 Receive..................................................................................................................................................75
3.3 Transmit .................................................................................................................................................75
3.4 Configuring the Conditions for the Fan to Function (Fan Action)............................................................76
3.5 Executing Software Reset of the Repeater (Reset) ...............................................................................76
3.6 Forced Firmware Programming Mode ...................................................................................................76
3.7 Factory Reset.........................................................................................................................................77
4TRANSMISSION/ RECEPTION/ REPEAT....................................................................................................78
4.1 Transmit and Receive Frequencies........................................................................................................78
4.2 Transmission Power (Transmit Power) ..................................................................................................78
4.3 Channel Spacing....................................................................................................................................79
4.4 Configuring the Priority Order of Transmission (PTT Priority) ................................................................79
4.5 Configuring the Reception Method of a Channel (Channel Type) .......................................................... 80
4.6 Configuring the Duration of Transmission in the Received Mode (Signaling Reset Timer) .................... 81
4.7 Restricting the Continuous Transmission Time (Time-out Timer (TOT)) ................................................ 86

2
FUNC (E)/ Ver 2.00
4.8 Toggling the Capability to Transmit by Using the PTT (Test PTT) Control between Enabled and Disabled
(Local TX Enable/Disable) .....................................................................................................................88
4.9 Toggling All Transmissions by Using PTT Controls Between Enabled and Disabled (TX Enable/Disable)
...............................................................................................................................................................89
4.10 Toggling Repeat Behaviors Between Enabled and Disabled (Repeat Enable/Disable) .........................89
4.11 Configuring the Threshold to Activate or Deactivate the RSSI Voltage Detection Function (Lowest Receive
Level Threshold) ....................................................................................................................................90
4.12 Waiting to Receive on the Transmit Frequency (Standby on Transmit Frequency)................................91
4.13 Operation Mode .....................................................................................................................................92
4.14 Take Over ..............................................................................................................................................94
5SOUND .........................................................................................................................................................95
5.1 Tones that Sound When a User Operates the Repeater or When the Repeater Status Is Changed .....95
5.2 Transmitting a Test Tone during Transmission (Test Tone).....................................................................95
5.3 Transmitting a Courtesy Tone After Transmission Ends (Courtesy Tone) ..............................................96
5.4 Voting Pilot Tone ....................................................................................................................................98
6ANALOG COMMUNICATIONS .....................................................................................................................99
6.1 Using Signaling......................................................................................................................................99
6.2 Continuing Transmission for a Certain Length of Time After Reception Stops (Repeater Hold Time)..102
6.3 Temporarily Disabling the Squelch (Squelch Off)................................................................................. 102
6.4Adjusting the Reception Sensitivity of the Repeater (Squelch Level)................................................... 103
6.5 Temporarily Disabling the Signaling (Monitor)......................................................................................104
6.6 Avoiding Interference with Other Communications (Busy Channel Lockout (Analog)).........................105
6.7 Using the Network by Using an Analog GID ........................................................................................106
7DMR DIGITAL COMMUNICATIONS ...........................................................................................................108
7.1 About Own ID.......................................................................................................................................108
7.2 About the Slot Number (Slot Selection) ...............................................................................................108
7.3 Using Signaling....................................................................................................................................109
7.4 Avoiding Interference with Other Communications (Busy Channel Lockout (DMR)).............................111
7.5 Continuing Transmission for a Certain Length of Time After Various Transmissions End .................... 113
7.6 Making a Group Call ............................................................................................................................ 117
7.7 Making an Unaddress Call................................................................................................................... 117
7.8 Limiting the IDs for Repeat Transmission (User List (GID)/ User List (UID))........................................ 117
7.9 Interrupting Voice Communications from Subscriber Units Other than the Calling Subscriber Unit (Call
Interrupt) ..............................................................................................................................................125
8NXDN DIGITAL COMMUNICATIONS .........................................................................................................126
8.1 NXDN Mode.........................................................................................................................................126
8.2 RAN Encode/ Decode..........................................................................................................................128
8.3 NXIP Site ID.........................................................................................................................................129
8.4 Avoiding Interference with Other Communications (Busy Channel Lockout (NXDN))..........................130
8.5 Radio Access Control........................................................................................................................... 131

3
FUNC (E)/ Ver 2.00
9CW ID .........................................................................................................................................................133
9.1 CW ID ..................................................................................................................................................133
9.2 Transmit Interval Time..........................................................................................................................134
9.3 Transmit Delay Time ............................................................................................................................ 134
9.4 CW Speed ...........................................................................................................................................135
9.5 CW Modulation Delay Time .................................................................................................................135
9.6 Audio Frequency..................................................................................................................................136
9.7 Interval Activity Transmit ......................................................................................................................136
10 FUNCTION PORTS.................................................................................................................................137
10.1 Available Functions for the AUX Input/Output Ports............................................................................. 138
10.2 Available Functions for the AUX Input Ports ........................................................................................ 138
10.3 Available Functions for AUX Output Ports............................................................................................ 141
11 CONTROLLING THE REPEATER BY REMOTE CONTROL (REMOTE CONTROL) .............................145
11.1 Remote Control....................................................................................................................................145
11.2 Remote Access Control .......................................................................................................................146
12 CONVENTIONAL IP NETWORK.............................................................................................................147
12.1 Communicating with a Repeater Connected by Using an IP Network (Intersite Call) ..........................147
12.2 Site Roaming .......................................................................................................................................154
12.3 Restricting Transmission to Avoid Interference with Other Communications (Cross-busy)..................160
12.4 Configuring the Target of an Intersite Call (Site Group Table) .............................................................. 163
12.5 About the Network Configuration ......................................................................................................... 163
12.6 Using Console......................................................................................................................................165
12.7 SIP Phone............................................................................................................................................167
12.8 IP Remote Control Interface (IPRCI)....................................................................................................181
13 MANAGING DEVICES ON AN IP NETWORK (SNMP)...........................................................................183
13.1 SNMP ..................................................................................................................................................183
13.2 SNMP Troubleshooting ........................................................................................................................ 188
14 IP INTERFACE FUNCTION.....................................................................................................................192
14.1 Console................................................................................................................................................ 192
14.2 Voice Logging ...................................................................................................................................... 194
15 POWER SUPPLY MONITOR .................................................................................................................. 200
15.1 Configuring the Threshold Value to Detect the Reduced Voltage Level (Power Supply Lower Level) .201
15.2 Warning by the AUX Output Port .........................................................................................................201
15.3 Warning by Warning Tone ....................................................................................................................202
15.4 Warning by Operation Tone .................................................................................................................203
16 PROTECTING DATA OF THE REPEATER BY A PASSWORD ...............................................................204
16.1 Password When Reading Configuration Data in a PC (Read Authorization Password).......................204
16.2 Password When Writing Configuration Data (Overwrite Password).....................................................204
16.3 Password When Accessing the Repeater (Network Password)........................................................... 204

4
FUNC (E)/ Ver 2.00
17 MODE......................................................................................................................................................205
17.1 Writing and Reading Configuration Data (FPU Programming Mode)...................................................205
17.2 Overwriting Firmware (Firmware Programming Mode) ........................................................................205
17.3 Testing or Adjusting the Transmit and Receive Capabilities of the Repeater (PC Test Mode) .............207
18 LOG.........................................................................................................................................................208
18.1 Communication Log .............................................................................................................................208
18.2 System Log.......................................................................................................................................... 209
18.3 Diagnostic Data....................................................................................................................................210
18.4 Content of Communication Log............................................................................................................ 211
18.5 Content of System Log ........................................................................................................................213
19 TEST CONSOLE..................................................................................................................................... 214
19.1 Description........................................................................................................................................... 214
19.2 Downloading the Test Console............................................................................................................. 214
19.3 Starting and Exiting the Test Console ..................................................................................................215
19.4 Configuring the Test Console ...............................................................................................................215
19.5 Operation of the Test Console.............................................................................................................. 218
20 MULTI LOADER ...................................................................................................................................... 219
20.1 About Connection ................................................................................................................................ 220
20.2 How to Use .......................................................................................................................................... 221
20.3 Screen Specifications ..........................................................................................................................221
20.4 Operation (from Startup to Firmware Conversion, Transfer, and Transfer Completion) .......................225
21 ERROR MESSAGE LIST FROM REPEATER......................................................................................... 230
INDEX ................................................................................................................................................................232

OUTLINE / About This Manual
5
FUNC (E)/ Ver 2.00
OUTLINE
About This Manual
This In-depth manual describes the functions of the NXR-1700/ NXR-1800 repeater. This document is created for the
product having the following design specifications:
Item
Specifications
How to Verify
Market Code
E
Printed on the label of the product.
Firmware Version
of the Repeater
2.00.00
Can be viewed in the Repeater Information dialog box of KPG-D7.
Version of KPG-D7
V 2.00
Can be viewed in the About dialog box of KPG-D7.
Note
When connecting to a PC via IP, we have confirmed in advance that when using a specific USB-LAN adapter, communication
will fail due to the influence of the USB-LAN adapter side.
If the LED on the left side of the LAN connector of the NXR-1700/ NXR-1800 does not light up, it is assumed that the USB-
LAN adapter corresponds to this.
We have also confirmed that communication can be performed normally via the HUB. If communication seems to be failing,
we recommend connecting via HUB.
How to Read the In-depth Manual
The In-depth Manual has the following sections:
NXR-1700/ NXR-1800 Function Reference (FUNC) (this document)
Describes the functions for Analog Conventional, DMR Conventional, and NXDN Conventional, etc. for NXR-1700/
NXR-1800.
NXR-1700/ NXR-1800 Basic Configuration
Describes the function explanation for Web Tool and the rack mounts of NXR-1700/ NXR-1800.
About Notations
The following notations are used in this manual:
[ ]
The characters in [ ] indicate the name of the operating portion of each device and the name of the key of the PC.
“ ” (Double Quotation Mark)
The characters in “ ” indicate the name of the options, buttons, and menus shown on KPG-D7, or the LCD display of
the repeater.

OUTLINE / About This Manual
6
FUNC (E)/ Ver 2.00
Bold Letters
The characters in bold letters indicate the name of the windows, tabs, checkboxes in KPG-D7 and functions assigned
to the keys of the repeater.
[ ] + [ ]
This notation is used for describing functions activated by pressing 2 keys on the computer keyboard at the same time.
For example, in order to input capital A into a PC, capital A is described as [Shift] + [a], which indicates that the [a] key
must be pressed while pressing and holding the [Shift] key.
About the Notation of the Supported Models
This manual describes the supported models according to the following rules:
Model Name
Band
Type
Frequency (RX/ TX)
NXR-1700
VHF
E
136 MHz to 174 MHz
NXR-1800
UHF
E
450 MHz to 520 MHz
E2
400 MHz to 470 MHz

OUTLINE / Abbreviations Used in this Document
7
FUNC (E)/ Ver 2.00
Abbreviations Used in this Document
The following abbreviations are used in this in-depth manual. Refer to the abbreviation table below.
Abbreviation
Full Spelling or Meaning
AIS
Application Interface Specification (DMR Application Interface)
AUX
Auxiliary
CC
Color Code
Ch
Channel
COR
Carrier Operated Relay
CW
Continuous Wave
deg
degree(s)
DQT
Digital Quiet Talk
DSCP
Differentiated Services Code Point
GID
Group ID
HPA
High Power Amplifier
HSB
Hot Standby
ICMP
Internet Control Message Protocol
I/O
Input/Output
IPRCI
IP Remote Control Interface
Mic
Microphone
QoS
Quality of Service
QT
Quiet Talk
RAN
Radio Access Number
RSSI
Received Signal Strength Indication
RX
Reception, Receiver
SIP
Session Initiation Protocol
SNMP
Simple Network Management Protocol
TOR
Tone Operated Relay
TLS
Transport Layer Security
TOT
Time-out Timer
TX
Transmission, Transmitter
TX LED
Transmission LED
UID
Unit ID
VCO
Voltage Controlled Oscillator
VIP
Virtual IP Address
VLI
Voice Logging Interface
VSWR
Voltage Standing Wave Ratio

OUTLINE / About Copyright
8
FUNC (E)/ Ver 2.00
About Copyright
Software Copyrights
All copyrights and other intellectual property rights for this technical document and relevant in-depth manuals as well
as the software described in this technical document, relevant in-depth manuals, and help texts and manuals
attached to the software are owned by JVCKENWOOD Corporation.
A right to use the software described in this technical document and relevant in-depth manuals is granted to a licensee
by JVCKENWOOD Corporation; however, the title to ownership for the software shall be owned by JVCKENWOOD
Corporation. Refer to the help texts attached to this software for details.
JVCKENWOOD Corporation does not warrant that quality and performance of the software described in this
technical document and relevant in-depth manuals conform to the applicability of any use, and JVCKENWOOD
Corporation shall be free from liability for any defects, damage or loss, or from any warranty for anything other than
what is expressly described in this technical document and relevant in-depth manuals.
Any distribution, resale, lease, waiver, assignment, reproduction or disclosure on a website of all technical manuals
written and made by JVCKENWOOD Corporation including but not limited to in-depth manuals, supplements, and
help texts attached to the software and marked as “Confidential” shall strictly be prohibited.
Firmware Copyrights
The title to and ownership of copyrights for firmware which is described in this technical document, relevant in-depth
manuals, and help texts are reserved for JVCKENWOOD Corporation, and the firmware shall be embedded in
KENWOOD product memories.
Any modifying, reverse engineering, copying, reproducing or disclosing on an Internet website of the firmware is
strictly prohibited without prior written consent of JVCKENWOOD Corporation.
Furthermore, any reselling, assigning or transferring of the firmware is also strictly prohibited without embedding the
firmware in KENWOOD product memories.
Firmware is equipped with the AMBE+2™ voice encoding technology under license from Digital Voice Systems.
About Trademarks and Intellectual Properties
Adobe and Adobe Acrobat are either trademarks of Adobe Systems Incorporated, or registered trademarks of
Adobe Systems Incorporated in the United States and/or other countries.
Microsoft and Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States
and/or other countries.
All other product names referenced herein are trademarks or registered trademarks of their respective
manufacturers.

OUTLINE / Outline of This Repeater
9
FUNC (E)/ Ver 2.00
Outline of This Repeater
NXR-1700/ NXR-1800 is the repeater for the use of professionals. The repeater is equipped with analog FM mode and
digitally supports DMR Conventional mode (Tier2) and NXDN Conventional mode. NXR-1700/ NXR-1800 can be
operated with the TKR-Dx10 series/ NXR-x10 series.
Equipped with the OLED display, and the channel information and the repeater status can be displayed.
Equipped with a USB connector, and a headset can be connected.
Equipped with the Knob, and a control such as the channel selection can be done by the Knob operation.
A System Log, Communication Log, and Log for failure analysis are supported.
In addition to User List, the unauthorized use prevention function of the Authentication method (password
authentication) is supported.
For the digital communication protocol, DMR Conventional and NXDN Conventional are supported.
Mixed mode with analog FM mode and DMR Conventional is supported.
Equipped with a LAN connector as standard, and the configuration and firmware update via an IP are supported.
Monitoring the repeater by SNMP is supported.
Remote control of the repeater by using the Web Tool is supported.
Console/OTAP Manager/SIP Server/Voice Logger can be connected without the need of an IP gateway.
Even with an analog channel, basic audio transmission and reception using the channel configuration is
supported by AIS/NXIP.
The IPRCI command of PC Interface Protocol can be used via an IP.
The IP Conventional network function in DMR Mode/NXDN Mode/Analog Mode is supported.
The redundancy (Hot Standby) function to switch to a backup repeater in the event of a repeater failure is
supported.

OUTLINE / General Features
10
FUNC (E)/ Ver 2.00
General Features
General
32 Channels (Maximum programming channel number)
Models
VHF Models (136 MHz to 174 MHz) (Low: 1 W, High: 50 W)
Power transmitter up to 50 W @ 50 % Duty, 25 W @ 100 % Duty cycle. Adjustable to 1 W.
UHF Models (400 MHz to 470 MHz, 450 MHz to 520 MHz) (Low: 1 W, High: 40 W)
Power transmitter up to 40 W @ 50 % Duty, 25 W @ 100 % Duty cycle. Adjustable to 1 W.
Display Functions
1.71 inches OLED display, Display color: Yellow (Background: Black)
Specifications
Thermal-controlled Cooling Fan
In addition to the Analog FM Conventional Mode, DMR Conventional (Tier2) Mode/ NXDN Conventional Mode
(either one programmable at a time)
USB-A Connector ready for Audio accessories
D-Sub 25-pin Connector
System Redundancy (Hot Standby)
Built-in IP Network Adapter
SNMP protocol for direct reporting to generic system
IP Remote Management (Monitor/Control/Programming/Test Console)
Ready for IP Interface to External Applications (for Console, OTAP)/ Voice Logging
Built-in SIP IF without external Console or Gateway (Digital only)
Enhanced Security (HTTPS)
Multi-site Conventional IP Network up to 16 Site (Analog/Digital)

OUTLINE / General Features
11
FUNC (E)/ Ver 2.00
The function differences of NXR-1700/ NXR-1800 and TKR-Dx10/ NXR-x10 are as follows:
Function Name
Difference
Analog
Mode
DMR
Mode
NXDN
Mode
Remark
Hot Standby
New*1
✔
✔
✔
-
IP Interface
New*1
✔
✔
✔
-
QoS
New*1
✔
✔
✔
-
-
-
-
-
-
-
Embedded Message
None*2
✔
✔
✔
-
Embedded Message with
Password
None*2
✔
✔
✔
-
-
-
-
-
-
-
Fan Action
None*2
✔
✔
✔
-
Forced Firmware
Programming Mode
New*1
-
-
-
-
Factory Reset
New*1
-
-
-
-
-
-
-
-
-
-
Transmit Power
None*2
✔
✔
✔
-
Channel Spacing
None*2
✔
-
✔
-
PTT Priority
None*2
✔
✔
✔
-
Channel Type
None*2
✔
✔
✔
-
Signaling Reset Timer
None*2
✔
✔
✔
-
Time-out Timer (TOT)
None*2
✔
✔
✔
-
Local TX Enable/Disable
None*2
✔
✔
✔
-
TX Enable/Disable
None*2
✔
✔
✔
-
Repeat Enable/Disable
None*2
✔
✔
✔
-
Lowest Receive Level
Threshold
None*2
✔
✔
✔
-
Standby on Transmit
Frequency
None*2
✔
✔
✔
-
Operation Mode
Yes*3
✔
✔
✔
Supports the “TA Direct”
configuration.
Take Over
None*2
✔
✔
✔
-
-
-
-
-
-
-
Test Tone
Yes*3
✔
✔
✔
Behaves at the default 1000 Hz
Courtesy Tone
Yes*3
✔
✔
✔
Configuration is common for analog
and digital.
-
-
-
-
-
-
QT/ DQT
None*2
✔
-
-
-
QT Decode Delay
None*2
✔
-
-
-

OUTLINE / General Features
12
FUNC (E)/ Ver 2.00
Function Name
Difference
Analog
Mode
DMR
Mode
NXDN
Mode
Remark
Decode Signaling
Enable/Disable
None*2
✔
-
✔
-
Encode Signaling
Enable/Disable
None*2
✔
-
✔
-
Squelch Tail Elimination
None*2
✔
-
-
-
QT Reverse Burst
None*2
✔
-
-
-
DQT Turn-off Code
None*2
✔
-
-
-
Multiple Encode/Decode Table
None*2
✔
-
✔
-
Repeater Hold Time
None*2
✔
-
✔
-
Squelch Off
None*2
✔
✔
✔
-
Squelch Level
None*2
✔
✔
✔
-
Monitor
None*2
✔
-
✔
-
Busy Channel Lockout
(Analog)
None*2
✔
-
-
-
Analog GID
New*1
✔
-
-
-
-
-
-
-
-
-
Slot Selection
None*2
-
✔
-
-
CC
None*2
-
✔
-
-
Busy Channel Lockout (DMR)
Yes*3
-
✔
-
NXR-x10 series: Not supported.
Call Hangtime
None*2
-
✔
-
-
Data Hangtime
None*2
-
✔
-
-
Channel Hangtime (Mixed
Channel)
None*2
-
✔
-
-
Channel Hangtime (DMR
Channel)
None*2
-
✔
-
-
Unaddress Call
None*2
-
✔
✔
-
User List (GID)
None*2
-
✔
✔
-
User List (UID)
None*2
-
✔
✔
-
Site Group
None*2
-
✔
-
-
Call Interruption
Yes*3
-
✔
-
NXR-x10 series: Not supported.
-
-
-
-
-
-
RAN Encode/ Decode
None*2
-
-
✔
-
NXIP Site ID
Yes*3
-
-
✔
Support for a network is available.
Busy Channel Lockout
(NXDN)
None*2
-
-
✔
-
Radio Access Control
New*1
-
-
✔
-
-
-
-
-
-
-
CW ID
None*2
✔
✔
✔
-

OUTLINE / General Features
13
FUNC (E)/ Ver 2.00
Function Name
Difference
Analog
Mode
DMR
Mode
NXDN
Mode
Remark
Transmit Interval Time
None*2
✔
✔
✔
-
Transmit Delay Time
None*2
✔
✔
✔
-
CW Speed
None*2
✔
✔
✔
-
CW Modulation Delay Time
None*2
✔
✔
✔
-
Audio Frequency
None*2
✔
✔
✔
-
Interval Activity Transmit
None*2
✔
✔
✔
-
-
-
-
-
-
-
AUX Input/Output
Yes*3
✔
✔
✔
AUX Input Monitor:
External PTT (Channel 1 to Channel 32)
-
-
-
-
-
-
Remote Control
None*2
✔
✔
✔
NXR-1700/ NXR-1800: Using Web Tool
TKR-Dx10: Using DTMF
Remote Access Control
New*1
✔
✔
✔
-
-
-
-
-
-
-
Conventional IP Network
Yes*3
✔
✔
✔
Communication between sites is
available in Analog Mode.
Intersite Call
Yes*3
✔
✔
✔
Same as above.
IP Casting
Yes*3
✔
✔
✔
Same as above.
Maximum Jitter Buffer Size
Yes*3
✔
✔
✔
Same as above.
Minimum Jitter Buffer Size
Yes*3
✔
✔
✔
Same as above.
Maximum Jitter Buffer Size
(Console/ SIP Phone)
Yes*3
✔
✔
✔
Same as above.
Minimum Jitter Buffer Size
(Console/ SIP Phone)
Yes*3
✔
✔
✔
Same as above.
Network-wide Signaling
Yes*3
✔
-
✔
Same as above.
Site Roaming
Yes*3
-
✔
✔
Only supports DMR Mode/ NXDN
Mode.
Cross-busy
Yes*3
✔
✔
✔
Communication between sites is
available in Analog Mode
Busy Channel Lockout (Cross-
busy)
Yes*3
✔
✔
✔
Same as above.
Site Group Table
None*2
✔
✔
✔
-
SIP Phone
New*1
-
✔
✔
-
IPRCI
New*1
✔
✔
✔
-
-
-
-
-
-
-
SNMP
New*1
✔
✔
✔
-
-
-
-
-
-
-
Busy Monitoring
New*1
✔
✔
✔
-
Voice Logging
New*1
✔
✔
-
-

OUTLINE / General Features
14
FUNC (E)/ Ver 2.00
Function Name
Difference
Analog
Mode
DMR
Mode
NXDN
Mode
Remark
-
-
-
-
-
-
Power Supply Monitor
None*2
✔
✔
✔
-
Power Supply Lower Level
None*2
✔
✔
✔
-
Operation Tone
None*2
✔
✔
✔
-
-
-
-
-
-
-
Read Authorization Password
None*2
✔
✔
✔
-
Overwrite Password
None*2
✔
✔
✔
-
Network Password
None*2
✔
✔
✔
-
-
-
-
-
-
-
FPU Programming Mode
Yes*3
✔
✔
✔
Write Data to the Repeater:
Enables or disables overwrite related to the
Web Tool configuration.
Time Adjustment
User List (DMR Mode/ NXDN Mode)
Console List
SIP User ID (DMR Mode/ NXDN Mode)
Firmware Programming Mode
Yes*3
✔
✔
✔
By the Web Tool and Multi Loader
PC Test Mode
None*2
✔
✔
✔
-
-
-
-
-
-
-
Communication Log
New*1
✔
✔
✔
-
System Log
New*1
✔
✔
✔
-
Diagnostic Data
New*1
✔
✔
✔
-
-
-
-
-
-
-
Test Console
New*1
✔
✔
✔
-
-
-
-
-
-
-
Multi Loader
New*1
-
-
-
-
*1 New: New item of NXR-1700/ NXR-1800
*2 None: No difference
*3 Yes: With difference

OUTLINE / About Options to Use the Functions Described in This Document
15
FUNC (E)/ Ver 2.00
About Options to Use the Functions Described in This Document
To use the functions described in this document, the following KENWOOD optional accessories need to be prepared
on your own as necessary:
Model Name
Description
KPG-D7
FPU
KWD-NX10DC
License/ DMR CONVENTIONAL
KWD-NX10NC
License/ NXDN CONVENTIONAL
KWD-NX10MS
License/ CONVENTIONAL IP NETWORK
KWD-NX10SP
License/ SIP PHONE
KAS-20C/ KAS-20S
PC App/ AVL & DISPATCH SOFTWARE (CLIENT/ SERVER)
KPG-180AP
PC App/ OTAP MANAGER SOFTWARE
KPT-300LMC
PC App/ LICENSE MANAGEMENT CLIENT
Note
Refer to KPG-180AP Basic Operations for details of KPG-180AP, which is OTAP MANAGER SOFTWARE.
Refer to KPT-300LMC Basic Operations for details of KPT-300LMC, which is LICENSE MANAGEMENT CLIENT.
How to Search for Information
For your convenience of reading through this document using Adobe Acrobat or Adobe Reader, a link to a
corresponding item is pasted in the Contents page, Index page, the lower part of each page and in the context.
Clicking the portion where a link is pasted enables a jump to the corresponding page.
Placing a pointer over the portion where a link is pasted changes the shape of the pointer to a hand ( ).
CONTENTS
Clicking a title in the Contents page allows a jump to the corresponding page.

OUTLINE / About Options to Use the Functions Described in This Document
16
FUNC (E)/ Ver 2.00
INDEX
Clicking a function name, a title or a page number in the Index pages allows a jump to the corresponding page.
Blue Characters in the Main Text
Clicking a portion with blue characters in the main context allows a jump to the corresponding page.
Return to the Previous Page
To return to the previous page, click the “Previous Page” button on your Adobe Acrobat or Adobe Reader, or press
the [<] key while pressing and holding the [Alt] key on the keyboard.
Search the Text
The text in this document can be searched using the search function of your Adobe Acrobat or Adobe Reader.

OUTLINE / About HUB
17
FUNC (E)/ Ver 2.00
About HUB
For the HUB connected to the repeater, we recommend the use of the following operation confirmed HUBs (as of June
2023):
Manufacturer
Model Number
NETGEAR
GS308
NETGEAR
GS108T
LINKSYS
LGS108
TP-Link
TL-SG108PE
CISCO
SF 100D-05
CISCO
Catalyst Express 500 WS-CE500-24TT V03
CISCO
CBS250-8T-D *1
*1: Configure “MDIX” for the HUB.
Note
Use the HUB that supports IEEE 802.3u (100 BASE-TX).

OUTLINE / Revision History
18
FUNC (E)/ Ver 2.00
Revision History
Date
Description
2022.10.28
1) Changed the version information in “About This Manual”.
2) Added the description of when the repeater starts with an Unprogrammed error to “Menu List” of “1.3
OLED display”.
3) Changed the display of Table 1-20 “E001” from Unprogramming to Unprogrammed (a specification
change).
4) Added “Service Reboot by the Web Tool” to Table 1-23.
5) Revised the item taken over by Switchover of “Hot Standby Function” to only the Virtual IP Address.
6) Added “Service Reboot” to Table 10-1.
7) Changed the display of Table 18-1 “E001” from Unprogramming to Unprogrammed (a specification
change).
8) Changed the version number from 1.00 to 1.02.
2023.07.19
1) Changed the version information in “About This Manual”.
2) Added NXR-1800.
3) Added the QoS function.
4) Added the NXDN function.
5) Added the SIP Phone function.
6) Added the IP Remote Control Interface (IPRCI) function.
7) Added the SNMP function.
8) Added the items of SNMP Troubleshooting to SNMP.
9) Added the descriptions of Communication Log and System Log to Log.
10) Added the items of the output contents related to Communication Log and System Log to Log.
11) Added the Multi Loader function.
12) Changed the version number from 1.02 to 2.00.

OUTLINE / Contents by purpose
19
FUNC (E)/ Ver 2.00
Contents by purpose
Repeater Operating Mode
Using the Hot Standby function
The Main and Sub repeaters are
configured and the system is operated
so as not to interrupt the system in the
event of a repeater failure.
Page 63
Configuring the Hot Standby function
The precautions about the construction
process for using the Hot Standby
function is described.
Page 66
Using IP Interface Function
The functions related to IP Network are
described.
Page 192
Transmission/ Reception
Changing Transmission Power
The transmission power of the repeater
can be changed either to high power or
low power.
Transmission Power (Transmit Power)
Page 78
Configuring the Priority Order of PTT
The repeater has multiple factors for
transmission, and the repeater can be
operated by configuring the priority order
of each factor for transmission.
Configuring the Priority Order of
Transmission (PTT Priority)
Page 79