Kenwood KVWA146SL User manual

,
KVWA146SL
WASHING MACHINE
USER MANUAL

THE CONTENTS
SECTION 1:BEFORE USING
•Safety warnings
•Recommendations
SECTION 2:INSTALLATION
•Removal of transportation screws
•Adjustment of feet
•Electrical connection
•Water supply connection
•Water drain connection
SECTION 3: GETTING TO KNOW YOUR WASHING MACHINE
SECTION 4:CONTROL PANEL
•Start/Pause button
•Function indicator lights
•Function buttons
•Program knob
SECTION 5:WASHING YOUR LAUNDRY
•Before washing
•Running the machine
SECTION 6:MAINTENANCE AND CLEANING
•Water inlet filters
•Pump filter
•Detergent drawer
•Siphon plug
•The cabinet
•The drum
•Removal of limescale
SECTION 7: PRACTICAL INFORMATION
SECTION 8:AVOIDING MINOR FAULTS
SECTION 9:AUTOMATIC FAILURE DETECTION SYSTEM
SECTION 10:INTERNATIONAL WASHING SIGNS
SECTION 11:TECHNICAL SPECIFICATIONS
1

SECTION 1:BEFORE USING
SAFETY WARNINGS
•Do not use a multiple socket or extension cord.
•Do not insert a plug with damaged or broken cord into the socket.
•If the cord is damaged it should be replaced by the manufacturer or a
qualified service engineer in order to avoid a hazard.
•Never remove the plug from the socket by pulling the cord.
•Do not insert the plug with wet hands.
•Never touch the machine with wet hands or feet.
•Never open the detergent drawer while the device is running.
•Never force open the door of the machine while the machine is
running.
•Since the machine can reach high temperatures while running, do not
touch the drain hose and water connections when the machine is on.
•In case of any failure, first unplug the device and close the water tap.
Do not attempt to repair.Contact a qualified service engineer.
•Do not forget that the packing material of your machine is hazardous
for children.
•Do not let your children play with the washing machine.
•Keep your pet away from your machine.
•When using this machine use the guidelines within the manual.
•Your machine is designed for domestic use. Warranty will be invalid if
you use it for commercial purposes.
•This product is designed in order to work between 15-35 °C.
•This appliance should not be installed on thick pile carpet.
RECOMMENDATIONS
•If the detergent or softener is in contact with the air for a long time it
will dry and stick to your detergent drawer.To avoid this put your
detergent and softener into the detergent drawer just before washing.
•It is recommended that you use pre-washing program for only very
dirty clothes.
•Please do not exceed the maximum loading capacity of 6 kg.
2

•If you are not using your machine for a long time, unplug from the
mains supply, close the water supply and leave the door open in
order to keep the inside of the machine dry and prevent unpleasant
odours.
•As a result of the quality control procedures, a certain amount of
water may remain in your machine. This is not harmful for your
machine.
SECTION 2: INSTALLATION
You must pay attention to the following issues before using your washing
machine.
REMOVAL OF TRANSPORTATION SCREWS
•Transportation screws, which are located at the back of the machine,
must be removed before running the machine.
•Loosen the screws by rotating counterclockwise by a suitable wrench.
(DIAGRAM-1)
•Remove the screws by pulling them.(DIAGRAM-2)
•The plastic parts located in the interior part of your machine will fall
down under the device.
•Lift your machine up slightly, pick up the plastic parts(2 persons
recommended).
•If all of the plastic parts of screw groups have not fallen down; open
the door of your machine,move the drum until all plastic parts fall
down. Collect the parts that have fallen to the floor. There are two
plastic parts per screw.
•To the holes where the transport screws have been removed, insert
the plastic transport screw caps found in the accessories bag.
(DIAGRAM-3)
•The transportation screws, that have been removed from the machine
should be kept for any other transportation necessities.
DIAGRAM-2
DIAGRAM-1 DIAGRAM-3
ADJUSTMENT OF FEET
•Do not install your machine on rugs or similar surfaces.
•For your machine to work silently and without any vibration, it should
be installed on a flat, non-slippery and tough ground.
3

•You can adjust the balance of your machine from its feet.
•First, loosen the plastic adjustment nut by turning clockwise(A).
•Adjust by rotating the feet upwards or downwards.
•After the balance has been reached, tighten the plastic adjustment
nut again by rotating it counter clockwise(B).
•Never put cartons, wooden blocks or similar materials under the
machine to balance or level the ground.
A B
ELECTRICAL CONNECTION
•Your washing machine works with 220-240V and 50Hz.
•A special earthed plug has been attached to the cable of your
washing machine. This plug must be inserted to a earthed socket.
The fuse value should be 10 amp. If you have no such sockets and
fuses in your house, contact a qualified electrician.
•Our company will not be responsible for any damages that may
occur as a result of usage without earthing.
WATER SUPPLY CONNECTION
•This model is designed for cold fill only.
•To prevent leakage from the connection joints, make sure the washer
at the end of water inlet hose is fitted.
•Connect the hose provided to the water inlet valve. Tighten the plastic
parts of the connections with your hand.Contact a qualified plumber
for any assistance needed.
4

•Water pressure of 1-10 bars from your tap will enable your machine
to work more efficiently.(1 bar pressure means water flow of more
than 8 liters in 1 minute from a fully opened tap).
•After connections are completed, check for leakage of the connection
joints by turning on your tap completely.
•Be sure that water inlet hoses are not folded, broken or crushed.
•Connect the other end of the water inlet hoses to a ¾”, thread water
tap. Cold water inlet (White filter valve)
WATER DRAIN CONNECTION
•Be sure that water inlet hoses are not folded, twisted, crushed or
elongated by stretching.
•Water drain hose should be mounted at a height of minimum 60 cm,
maximum 100 cm from the ground.
•The end of the water drain hose may directly be fitted to the dirty
water outlet hole or a special apparatus mounted on the outlet
bracket of the wash-stand.
•Never attempt to extend the water drain hose by adding extra parts.
5

SECTION 3: GETTING TO KNOW YOUR WASHING MACHINE
1 2 3
4
5
6
7
1-Upper tray 5-Handle
2-Detergent drawer 6-Filter cover
3-Control panel 7-Kickplate
4-Door
6

SECTION 4:CONTROL PANEL
1 2 3 4 5 6
1-Detergent drawer 4-Electronic display
2-Mode button 5-Start/pause button
3-Select button 6-Program knob
START/PAUSE BUTTON
This key is used for starting a programme selected or pausing by an
operating programme. Once a programme selected is started, the symbol
lights up on the electronic instrument. When it is pausing, the symbol
lights up on the electronic instrument.
WARNING
The programme knob must be turned into the position 0(stop) before
selecting the programme or changing a programme being continued.
MODE BUTTON
You can select the supplement functions of your washing machine by using
the mode key. Each time you press on this key, the symbol of a function will
be displayed on the electronic instrument.
SELECT BUTTON
To activate the function use the select key and the function symbol will be
show on the electronic display. You can then change the settings.
NOTE:During pause mode and at the end of a cycle the machine must be
turned to 0 (stop) before selecting the next programme.
7

FUNCTION BUTTONS
Rinse hold
This function is recommended to be used when the clothes cannot
be taken immediately after the end of the program.This will
prevent occurrence of wrinkles. When this button is pressed, the
last rinsing water is not drained. For the program to continue from
the same point, repress the same button.
Extra rinse
You can have one more rinsing done in addition to the rinses
which your machine has made in all washing programs by using
this function.
Soak
Using this function will ensure better cleaning by leaving your
clothes in water with detergent for a certain period of time before
your machine takes in the initial water and starts washing. This
function is recommended to be used for very dirty clothes.
Easy ironing
By using this function, you can ensure your clothes to come out
less wrinkled after the washing.
Plus water
By using this function, you can enable your machine to take in
some more water than the amount in the normal washing
operation. This will decrease the friction that occurs between your
clothes.This function is recommended to be used for your
sensitive clothes or for the ones you desire to be rinsed really well.
Stain remove
You can ensure a more intensive washing with keeping fixed the
temperature during the washing by using this function. It is
advised that you should use this function in very dirty and stained
laundries.
Note: A list of available functions can be found at the back of this
instruction book. More than one additional function can be selected at
once.
8

Adjusting wash water temperature
You can adjust the wash water temperature acording to the
programme that you have selected, using this function.
WARNING
You can not set the wash water temperature into more than the
temperature of the programme that you have selected.
Adjusting the spin cycle
Using this function, you can adjust the spin cycle depending
on the feature of your machine.
NOTE: Ensure the spin setting is correct for delicate items.
Child lock
While a washing process is carried out in your
machine, a child lock is available so that the
programme flow can not be affected when the
buttons of the machine are pressed. Child lock
will be activated after pressing the start/pause key
on the control panel for a period of 3
seconds.
When it is activated, “ LOCK” signal will appear
on the time indicator.To deactivate it, you should
press on the same key for a period of 3
seconds. When it is deactivated, “ UNLOCK”
signal will be displayed on the time indicator. Child
lock will deactivate itself at the end of the
programme.
WARNING
Function selection and confirmation keys of your machine will be deactivated
when child lock is in use.
Adjustment of the programme start time
Using this function, you can adjust after how long the washing
process should start. Once you have selected this function, time
indicator will be activated.
Time Indicator
9