Kettler ELBA Left & Right Loveseat User manual

Assembly Instructions
IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE USE AND
CARE OF YOUR GARDEN FURNITURE.
393105-0200B1**
ELBA Left & Right Loveseat
Oct 2020

Parts List
Do not discard any of the packaging until you have checked
that you have all the parts and the pack of xings.
www.kettlerusa.com/parts
In the unlikely event that this product has missing or damaged parts, please visit our website8.
7. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
Do not use any other tools other than those recommended to build this product.6.
Keep ttings out of children’s reach.5.
be fully tightened.
during initial assembly. Only upon completion of the assembly should all xing points
To ensure an easier assembly, we strongly advise that all ttings are only nger tightened 4.
Assemble this product on a soft surface.3.
the pack of ttings.
Do not discard any of the packaging until you have checked that you have all the parts and 2.
step by step instructions.
We suggest you spend a short time reading through this leaet and then follow the simple 1.
Helpful advice before you begin:
x1
Back
A
Allen Key
FBack Cushion G I
Seat Seat
BL BR Washer
CD
J
Bolt Cover
E
Seat Cushion
HLock Washer
x24 x16
x8
x24
x1 x1
x16
x4x4
x4
M6 x 25(mm)
M6 x 20(mm)

A
C
I
D
F
E
A
G
G
H
H
2
Finished
1
Assembly
BL

A
C
I
D
F
E
A
BR
G
G
H
H
4
Finished
3
Assembly

Assembly
E
C
F
J
5
ATTACHMENT PLATE

Spare Parts
Back Cushion
SPGCU-ELBABACK
CUSHION Seat Cushion
SPGCU-ELBASEAT
CUSHION
Back Cushion Cover
SPGCC-ELBABACK
COVER Seat Cushion Cover
SPGCC-ELBASEAT
COVER
Foot Caps
SPGFC-0393105-0200
Side Table Slats
SPGTT-ELBACORNER
PLANK
For further information and spare parts visit our website www.kettlerusa.com/parts

Parts Request Form
Model # (Required )*
Qty Item # (Optional)
Spare parts do not include mounting hardware. Please specify "with hardware" if needed.
Yes Date of purchase: Place of Purchase:
No CC:
Card type: Card No.: Exp:
(Required)
Ship to:Name:
Attn:
Address:
City: State/Prov:
Country:
Home Phone Number: Fax:
Email:
Billing Address for CC: (If different from above address)
Address:
Zip/Postal Code:
*Model numbers for toys and tennis table products can usually be found on a white sticker about 1 inch in diameter located on the underside of the unit; it
will be the 08xxx-xxx or 07xxx-xxx #. Model number for fitness products can be found on the silver label located on the frame of the unit listed as a TYP #
or ART. NR. Note: If a computer is being ordered for any Ergometer the BAUJAHR or the SERIEN NR. off of the unit MUST be included in the
description; this can also be found on the silver label. If you cannot provide the model # a picture is required for product identification.
Any order placed without the model # supplied will be non - refundable.
Phone - 866.804.0440
Fax - 757.427.0183
Email - [email protected]
Web Site - www.kettlerusa.com
KETTLER International, Inc.
Parts & Service Dept.
1355 London Bridge Rd.
Virginia Beach, VA 23453
Model Name
Unit that parts are being requested for:
P.O./Reference #:
*Serien Nr. or Baujahr
Method of payment: Check:
Parts Description
Is this a warranty parts order?
(Proof of purchase may be required)
Reason for order:
Zip/Postal Code:
We accept Visa, MC, and/or prepaid check/money order only. Part orders are subject to a S&H fee.
Last 3 digits from security code on back of CC:

Maintenance and Care Instructions
Attention
Please be aware that painted/varnished surfaces can be damaged by sunscreens and
oil based products.If the surface of your Kettler leisure furniture comes into contact
with sunscreens, the surface is to be cleaned without delay as described above.
Only in this way can lasting discolouration of the surface by the ingredients of the
sunscreen be prevented.
• Colours may vary slightly.
Take care to avoid contact of these items directly with the table surface.
• Some styles of wine glasses and other glass objects can act as a prism in strong sunlight.
• We recommend flipping cushion seats and backs to ensure even wear for added longevity.
responsibly.
• This product is 100% recyclable. At the end of the products life, please dispose of
(where available).
• Kettler furniture can be covered – we recommend that you only use Kettler tailored covers
where necessary.
• Moving parts such as locking mechanisms, catches and joints need to be lubricated
• Take care when placing items onto the table to avoid scratches.
• Do not drop anything sharp or heavy onto the table.
water rings.
• Do not leave hot items directly on the table. Coasters will protect your table from heat and
off with water.
staining. Marks should be removed using neat mild detergent with a soft cloth and washed
• Remove food and drink residue, tree sap and bird droppings as soon as possible to avoid
abrasive cleaners. Spray cleaners can and will cause the table to dis-colour.
• To clean your Kettler furniture, wash only with warm water and mild detergent. Do not use
• We recommend you clean your Kettler furniture at the beginning and end of the season.
• Kettler furniture is designed to be left outdoors all year round (excluding cushions).
• This product may only be used for its intended purpose for residential premises.
good looks.
We recommend that you follow these simple tips and instructions to ensure it retainsits
• The table top conforms to the UK BS standard.

For Your Safety
Attention
• Whilst assembling this product keep out of the reach of children. (Choking hazard –
contains small parts)
• Ensure that your working area is free of possible sources of danger, for example don’t
leave any tools lying around.
• Always dispose of packaging material in such a way that it may not cause any danger.
There is always a risk of suocation if children play with plastic bags!
• We reserve the right to make changes for technical reasons.
• Kettler will not be responsible for damaged caused by improper use.
purchase spare parts, they can be ordered directly from: www.kettlerusa.com/parts
damaged parts immediately. Use only spare parts manufactured by Kettler. Should you wish to
• Damaged components may endanger your safety or shorten the life of the product. Replace all
at the start of the season and at 1-2 month intervals dependent on use.
• Check all components regularly for correct function, damage and loose connections especially
• This product may only be used for its intended purpose as furniture for residential properties.
and quote the product code from
www.kettlerusa.com/warranty
mis-use or accidental damage.
only. It does not cover commercial use,
This warranty applies to domestic use
warranty against manufacturing faults.
Warranty For Home Use
www.kettlerusa.com
USA
Virginia Beach, Virginia 23453
1355 London Bridge Road
KETTLER International, Inc .
To validate your warranty, register at
the front of this booklet.
3yr Frame/
1yr Cushion
This product is covered by a 3 &1 year
Made in China

Assembly Instructions
IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE USE AND
CARE OF YOUR GARDEN FURNITURE.
393105-0200B2**
ELBA Coffee Table
Oct 2020

Assembly
No assembly required
www.kettlerusa.com/parts
8. In the unlikely event that this product has missing or damaged parts, please visit our website
7. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
Do not use any other tools other than those recommended to build this product.6.
Keep ttings out of children’s reach.5.
be fully tightened.
during initial assembly. Only upon completion of the assembly should all xing points
To ensure an easier assembly, we strongly advise that all ttings are only nger tightened 4.
Assemble this product on a soft surface.3.
the pack of ttings.
Do not discard any of the packaging until you have checked that you have all the parts and 2.
step by step instructions.
We suggest you spend a short time reading through this leaet and then follow the simple 1.
Helpful advice before you begin:

Spare Parts
Table Slats
SPGTT-ELBACORNER
TABLEPLANK Bolt Pack
SPGBPTABLE
0393105-0200
Footcaps
SPGFCTABLE-
0393105-0200
For further information and spare parts visit our website www.kettlerusa.com/parts

Parts Request Form
Model # (Required )*
Qty Item # (Optional)
Spare parts do not include mounting hardware. Please specify "with hardware" if needed.
Yes Date of purchase: Place of Purchase:
No CC:
Card type: Card No.: Exp:
(Required)
Ship to:Name:
Attn:
Address:
City: State/Prov:
Country:
Home Phone Number: Fax:
Email:
Billing Address for CC: (If different from above address)
Address:
Zip/Postal Code:
*Model numbers for toys and tennis table products can usually be found on a white sticker about 1 inch in diameter located on the underside of the unit; it
will be the 08xxx-xxx or 07xxx-xxx #. Model number for fitness products can be found on the silver label located on the frame of the unit listed as a TYP #
or ART. NR. Note: If a computer is being ordered for any Ergometer the BAUJAHR or the SERIEN NR. off of the unit MUST be included in the
description; this can also be found on the silver label. If you cannot provide the model # a picture is required for product identification.
Any order placed without the model # supplied will be non - refundable.
Phone - 866.804.0440
Fax - 757.427.0183
Email - [email protected]
Web Site - www.kettlerusa.com
KETTLER International, Inc.
Parts & Service Dept.
1355 London Bridge Rd.
Virginia Beach, VA 23453
Model Name
Unit that parts are being requested for:
P.O./Reference #:
*Serien Nr. or Baujahr
Method of payment: Check:
Parts Description
Is this a warranty parts order?
(Proof of purchase may be required)
Reason for order:
Zip/Postal Code:
We accept Visa, MC, and/or prepaid check/money order only. Part orders are subject to a S&H fee.
Last 3 digits from security code on back of CC:

Notes

Notes

Maintenance and Care Instructions
Attention
Please be aware that painted/varnished surfaces can be damaged by sunscreens and
oil based products.If the surface of your Kettler leisure furniture comes into contact
with sunscreens, the surface is to be cleaned without delay as described above.
Only in this way can lasting discolouration of the surface by the ingredients of the
sunscreen be prevented.
• Colours may vary slightly.
Take care to avoid contact of these items directly with the table surface.
• Some styles of wine glasses and other glass objects can act as a prism in strong sunlight.
• We recommend flipping cushion seats and backs to ensure even wear for added longevity.
responsibly.
• This product is 100% recyclable. At the end of the products life, please dispose of
(where available).
• Kettler furniture can be covered – we recommend that you only use Kettler tailored covers
where necessary.
• Moving parts such as locking mechanisms, catches and joints need to be lubricated
• Take care when placing items onto the table to avoid scratches.
• Do not drop anything sharp or heavy onto the table.
water rings.
• Do not leave hot items directly on the table. Coasters will protect your table from heat and
off with water.
staining. Marks should be removed using neat mild detergent with a soft cloth and washed
• Remove food and drink residue, tree sap and bird droppings as soon as possible to avoid
abrasive cleaners. Spray cleaners can and will cause the table to dis-colour.
• To clean your Kettler furniture, wash only with warm water and mild detergent. Do not use
• We recommend you clean your Kettler furniture at the beginning and end of the season.
• Kettler furniture is designed to be left outdoors all year round (excluding cushions).
• This product may only be used for its intended purpose for residential premises.
good looks.
We recommend that you follow these simple tips and instructions to ensure it retainsits
• The table top conforms to the UK BS standard.

For Your Safety
Attention
• Whilst assembling this product keep out of the reach of children. (Choking hazard –
contains small parts)
• Ensure that your working area is free of possible sources of danger, for example don’t
leave any tools lying around.
• Always dispose of packaging material in such a way that it may not cause any danger.
There is always a risk of suocation if children play with plastic bags!
• We reserve the right to make changes for technical reasons.
• Kettler will not be responsible for damaged caused by improper use.
purchase spare parts, they can be ordered directly from: www.kettlerusa.com/parts
damaged parts immediately. Use only spare parts manufactured by Kettler. Should you wish to
• Damaged components may endanger your safety or shorten the life of the product. Replace all
at the start of the season and at 1-2 month intervals dependent on use.
• Check all components regularly for correct function, damage and loose connections especially
• This product may only be used for its intended purpose as furniture for residential properties.
www.kettlerusa.com
USA
Virginia Beach, Virginia 23453
1355 London Bridge Road
and quote the product code from
www.kettlerusa.com/warranty
mis-use or accidental damage.
only. It does not cover commercial use,
This warranty applies to domestic use
warranty against manufacturing faults.
This product is covered by a 3 year
Warranty For Home Use
KETTLER International, Inc.
To validate your warranty, register at
the front of this booklet.
Made in China

Assembly Instructions
IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE USE AND
CARE OF YOUR GARDEN FURNITURE.
393105-0200B2**
ELBA Corner Chair
Oct 2020

Parts List
x1 x1 x8
x8
x8
x8x1
x1 x1 x1 x1
Back
A1 Back A2
Allen Key
FBack Cushion GBack Cushion H J
Seat
BWasher
CBolt
DBolt
Cover
E
Seat Cushion
I
Do not discard any of the packaging until you have checked
that you have all the parts and the pack of xings.
Lock Washer
www.kettlerusa.com/parts
8. In the unlikely event that this product has missing or damaged parts, please visit our website
7. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
Do not use any other tools other than those recommended to build this product.6.
Keep ttings out of children’s reach.5.
be fully tightened.
during initial assembly. Only upon completion of the assembly should all xing points
To ensure an easier assembly, we strongly advise that all ttings are only nger tightened 4.
Assemble this product on a soft surface.3.
the pack of ttings.
Do not discard any of the packaging until you have checked that you have all the parts and 2.
step by step instructions.
We suggest you spend a short time reading through this leaet and then follow the simple 1.
Helpful advice before you begin:
M6 x 25(mm)

A1
C
J
D
F
E
A2
B
G
I
H
1
2
Assembly
Finished