Kettler Fiji HUC28161BASE User manual

Assembly Instructions
Fiji Lounge Coee Table
HUC28161BASE / HUC28161TOP
Sept 2021
IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE
USE AND CARE OF YOUR GARDEN FURNITURE. ASSEMBLY
TIME
PERSONS
REQUIRED

Parts List / Assembly
Helpful advice before you begin:
1. We suggest you spend a short time reading through this leaet and then follow the simple
step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the parts and
the pack of ttings.
3. Assemble this product on a soft surface.
4. To ensure an easier assembly, we strongly advise that all ttings are only nger tightened
during initial assembly. Only upon completion of the assembly should all xing points
be fully tightened.
5. Keep ttings out of children’s reach.
6. Do not use any other tools other than those recommended to build this product.
7. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
8. In the unlikely event that this product has missing or damaged parts, please visit our website
www.kettler.co.uk
Components
x4
Bolt M8 - 45mm
1
x4 x1
x1 x1
Washers M8.5x30x2mm
2Allen Key 4 3
Leg Frame
ATerazzo Top - 1000 Round - 40mm Edge B

1.
Finished.
1
2
A
B
2.

Maintenance and Care Instructions
Attention
Please be aware that painted/varnished surfaces can be damaged by sunscreens. If
the surface of your Kettler leisure furniture comes into contact with sunscreens, the
surface is to be cleaned without delay as described above. Only in this way can lasting
discolouration of the surface by the ingredients of the sunscreen be prevented.
• This product may only be used for its intended purpose for residential premises. Any other uses
may aect the warranty.
• Eucalyptus wood requires regular cleaning and maintenance. Remove dust regularly with a
clean soft brush and wipe down with a clean damp cloth. Use pads, mats and coasters under
plates, glasses cups etc to protect them from scratches, spills, stains and heat damage. Wipe
spills immediately to prevent staining.
• Please visit the Kettler website for care advice for this item:
https://www.kettler.co.uk/furniture-care-advice/
• Storage: During Winter/wetter months store in a cool, dry and well ventilated location to prevent
excessive shrinkage or expansion of the wood. Alternatively cover the furniture with a Kettler
tailored cover or use a universal breathable cover.
• Moving parts such as locking mechanisms, catches and joints need to be lubricated where
necessary.
• Cushion care - Kettler cushions are not suitable for dry cleaning and not machine washable. They
are sponge clean only. Why not consider our “Fabric care kit” from our website for both cleaning
and protecting your cushions.
• Kettler furniture can be covered - we recommend that you only use Kettler tailored covers.
(where available) or a universal breathable cover.
• This product is 100% recyclable. At the end of the products life, please dispose of responsibly.
• Colours may vary slightly.