Kettler HUC31539C User manual

Assembly Instructions
280x110cm Dining Table
HUC31539C
Sept 2021
IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE
USE AND CARE OF YOUR GARDEN FURNITURE. ASSEMBLY
TIME
PERSONS
REQUIRED

Parts List
Helpful advice before you begin:
1. We suggest you spend a short time reading through this leaet and then follow the simple
step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the parts and
the pack of ttings.
3. Assemble this product on a soft surface.
4. To ensure an easier assembly, we strongly advise that all ttings are only nger tightened
during initial assembly. Only upon completion of the assembly should all xing points
be fully tightened.
5. Keep ttings out of children’s reach.
6. Do not use any other tools other than those recommended to build this product.
7. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
8. In the unlikely event that this product has missing or damaged parts, please visit our website
www.kettler.co.uk
x1
x2
x2
x1
x8 x2
Legs A
A
Legs B
B
Under Crossbar
C
Table Top
D
M8x140 Bolts with Nuts
EAllen Key 4
G
Do not discard any of the packaging until you have checked
that you have all the parts and the pack of xings.

1
22
Assembly
A
B
A
B
E
E
C

Assembly
3
4
Finished
A
BC
E
E
E
D
Ensure the table top
is protected during
assembly to avoid
damage to the surface

Maintenance and Care Instructions
• This product may only be used for its intended purpose for residential premises. Any other uses
may aect the warranty.
• Acacia wood requires regular cleaning and maintenance. Remove dust regularly with a clean
soft brush and wipe down with a clean damp cloth. Use pads, mats and coasters under plates,
glasses cups etc to protect them from scratches, spills, stains and heat damage. Wipe spills
immediately to prevent staining.
• Storage: During Winter/wetter months store in a cool, dry and well ventilated location to prevent
excessive shrinkage or expansion of the wood. Alternatively cover the furniture with a Kettler
tailored cover or use a universal breathable cover.
• Moving parts such as locking mechanisms, catches and joints need to be lubricated where
necessary.
• Please visit the Kettler website for care advice for this item:
https://www.kettler.co.uk/furniture-care-advice/
• Cushion care - Kettler cushions are not suitable for dry cleaning and not machine washable. They
are sponge clean only. Why not consider our “Fabric care kit”from our website for both cleaning
and protecting your cushions.
• Kettler furniture can be covered - we recommend that you only use Kettler tailored covers.
(where available) or a universal breathable cover.
• This product is 100% recyclable. At the end of the products life, please dispose of responsibly.
• Colours may vary slightly.
Attention
Please be aware that painted/varnished surfaces can be damaged by sunscreens. If
the surface of your Kettler leisure furniture comes into contact with sunscreens, the
surface is to be cleaned without delay as described above. Only in this way can lasting
discolouration of the surface by the ingredients of the sunscreen be prevented.