Kettler Palma 0193315-2100 User manual

Assembly Instructions
Palma Glass Top Table
0193315-2100/3310/5510
August 2021
ASSEMBLY
TIME
PERSONS
REQUIRED
IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE USE AND
CARE OF YOUR GARDEN FURNITURE.

Parts List
x10
x10
x10
x1
x2 x1
x1
Leg Connecting Frame
DWashers E
Allen Key
H
Table Top
A
Table Legs
C
Glass Top
B
Do not discard any of the packaging until you have checked that you have all the parts and the pack of xings.
Screws M6x20
F Plastic Caps G
Helpful advice before you begin:
1. We suggest you spend a short time reading through this leaet and then follow the simple
step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the parts and
the pack of ttings.
3. Assemble this product on a soft surface.
4. To ensure an easier assembly, we strongly advise that all ttings are only nger tightened
during initial assembly. Only upon completion of the assembly should all xing points be fully
tightened.
5. We recommend a periodic check on all xing points to make sure they remain fully tightened.
6. Keep ttings out of children’s reach.
7. Do not use any other tools other than those recommended to build this product.
8. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
9. In the unlikely event that this product has missing or damaged parts, please visit our website
www.kettler.co.uk/shop.

Assembly
1
Ensure the table top
is protected during
assembly to avoid
damage to the surface
G
F
E
C
C
A

Assembly
2
G
D
GE
Assemble all parts
loosely and when all
components are in place
tighten xings to secure

3
A
B