Kettler PNLV20017-0200C User manual

Assembly Instructions
Panalsol Premium Louvre
3m x 3.6m
PNLV20017-0200C
March 2022
ASSEMBLY
TIME
PERSONS
REQUIRED
IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE USE AND
CARE OF YOUR PANALSOL PREMIUM LOUVRE.
90

Do not discard any of the packaging until you have checked that you have all the parts and the pack of xings.
Parts List
1816
17
18
19
22
23
9
10
11
12
13
14
15
1A
2
2A
3
4
5
6
7
x1 x4 x44
x2
x2
x3
x2
x1
x2
x3
x1
x16
x44
x2
x4
x1
x1
x1
x2
x1
x1
x1
x78

Helpful advice before you begin:
1. We suggest you spend a short time reading through this leaet and then follow the simple
step by step instructions.
2. Do not discard any of the packaging until you have checked that you have all the parts and
the pack of ttings.
3. Assemble this product on a soft surface.
4. To ensure an easier assembly, we strongly advise that all ttings are only nger tightened
during initial assembly. Only upon completion of the assembly should all xing points
be fully tightened.
5. Keep ttings out of children’s reach.
6. Do not use any other tools other than those recommended to build this product.
7. Please do not use substitute parts. Use only additional or replacement parts supplied by Kettler.
8. In the unlikely event that this product has missing or damaged parts, please visit our website
www.kettler.co.uk
Assembly

Assembly
1
x4
1/1A/2/2A
15
13
16
8
1A
1B

3
2
Assembly
x2
1A
5
4
116
16
13
13
2A
3A
3B

Assembly
4
5
18
14
x2
17

6
Assembly
x2
16
13
13
16
2
1A
5
4
1
2A

Assembly
7
8
x4
x2
3
3
16
16
16
13
13
13

9
10
Assembly
7
7

Assembly
11
12
9
x2
x4

12
Assembly
10
11
x3
Power Indicator
Turn on the lights
O Button
Dim the lights

Assembly
Battery Instructions
1. Battery button instruction
AIndicator light: When the charging cable is
inserted into the TYPE-C socket, the indicator
light is red, indicating that the battery is
charging. When the light automatically lights
green, the battery is fully charged and you can
stop charging.
BPower switch button: If it is not used for a long
time, please turn the power switch button to 0FF
to prevent the battery from damage. Turn the
power switch to ON for normal use.
CTYPE-C: Charging socket
DBattery lock button: Prevent the battery from
falling o after inserting into the battery slot.
2. The main conguration and specication
• This product is motion sensor Light wall light;
adapting 0.2W 2835/6500K light source, constant
current control circuit
• 18650 battery capacity: 5000MAH
• Maximum output Voltage: 12V
• Maximum input current; 3A
• Minimum input current; 2A
• Charging time: >10 hours
• Product full load continuous discharge time: ≤ 8
hours (subject to actual conditions)
• The best use temperature: 10-30°C
• White Color mode: low, high, o
• In order to prevent harm, do not look directly at
the light source.
3. Usage Instructions
• Three controls mode via remote control –
maximum light, light and o.
• Before using the battery, please turn the power
switch button to the ON position and then insert
the battery into the battery slot for normal use
• In order to ensure the performance and life of the
product, when the product is not used for a long
time, it is recommended to use the battery at least
once a month.
4. Disposal
• The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
• To help protect the environment, please dispose of
the product properly when it has reached the end
of its useful life and not in the household waste.
• Batteries are not allowed to be immersed in water,
if it’s immersed in water accidentally, please dry it
rst before use.
D
C
19 10
AB

Maintenance and Care Instructions
• For domestic use only. Any other use may aect the warranty.
• Before assembling check whether all parts listed in the parts list have been delivered. Do not
start assembling if parts are missing or damaged.
• Assemble the Panalsol under normal weather conditions only. A partly assembled Panalsol is
not fully stable in heavy winds or rain.
• A failure to assemble this product correctly could cause damage or result in serious injury!
Assemble on a at surface. Before assembling make sure that you have enough space for the
procedure.
• A distance of at least two meters is required from buildings, bushes or other objects nearby.
Keep the assembly instructions available at all times and follow each of the individual steps
exactly.
• Before assembling, lay the components down on the ground according to their numbering.
This will make the assembly easier.
• During assembly, be careful with all the parts of the assembly (do not walk on them or distort
them) and beware of shearing and trapping risks.
• Keep children and pets away while setting up the Panalsol. Store the tubes in a place out of
reach of children.
• Never set up in closed rooms. This Panalsol is for outdoor use only.
• Try to place the Panalsol where it is protected from wind.
• Do not light any res in or near the Panalsol. Move away from re and barbecues.
• Do not ax any weights to the roof frame or the roof tension loops.
• Where there is strong wind or during the winter months, there may be some movement unless
secured to the ground.
• Please check the ttings on a regular basis and tighten screws if necessary.
• To clean, we recommend the Kettler Multi-purpose cleaner, available to purchase from www.
kettler.co.uk or alternatively wash with mild soapy water avoiding any harsh chemicals.
Attention
Please be aware that painted/varnished surfaces can be damaged by sunscreens and oil
based products. If the surface of your Kettler leisure furniture comes into contact with
sunscreens, the surface is to be cleaned without delay as described above. Only in this way
can lasting discolouration of the surface by the ingredients of the sunscreen be prevented.

• This product may only be used for its intended purpose as furniture for residential properties.
• Check all components regularly for correct function, damage and loose connections especially
at the start of the season and at 1-2 month intervals dependent on use.
• Damaged components may endanger your safety or shorten the life of the product. Replace all
damaged parts immediately. Use only spare parts manufactured by Kettler. Should you wish to
purchase spare parts, they can be ordered directly from: www.kettler.co.uk/shop
• Kettler will not be responsible for damaged caused by improper use.
For Your Safety
Attention
• Whilst assembling this product keep out of the reach of children. (Choking hazard –
contains small parts)
• Ensure that your working area is free of possible sources of danger, for example don’t
leave any tools lying around.
• Always dispose of packaging material in such a way that it may not cause any danger.
There is always a risk of suocation if children play with plastic bags!
• We reserve the right to make changes for technical reasons.
www.kettler.co.uk
Warranty For Home Use
This product is covered by a 3 year
warranty against manufacturing faults.
This warranty applies to domestic use
only. It does not cover commercial use,
mis-use or accidental damage.
To validate your warranty, register
at www.kettler.co.uk and quote
the product code from the front of
this booklet.