www.keyko-tech.com
standby status, then you plug audio cable to listen music from the portable device, please pull out
the audio plug and you can pick up the calling.
Ⅲ. C h ar g e op er a ti on i n str u cti on
1.Prior to use the headset the first time, please full charge the headset
2.Please insert the charge plug into the charge port which located on headset
3.When connect to charger, Red indicator led will shine all times, and it’ll lighting- off once full
charged.
4.When the power capacity is not enough, the headphone will buzz every 15 seconds, and orange
led shine.
Note: The device can be charged by USB cable we enclosed when connect to computer.
Ⅳ. Bl u etooth H ead set Tr ou b l eshooting：
If can’t match with mobile phone, please operate as below:
1.Please ensure that your headset has matched with mobile phone, and the Bluetooth function
in mobile phone had been opened.
2.Please check the distance between headset and your mobile phone, whether it’s beyond 10m,
and whether there is wall or other electronic devices blockers etc.。
3.Please check the power capacity.。
During calling, there is noise or voice disjointedly
1.please make sure the distance between your mobile phone and your headset in valid
communicating range (below 10m)
2.to get best timbre during headset calling, we suggest put your mobile phone on right side to
ensure best communication effect.
Ⅴ. Bl u etooth h ead setusage safety rule
1.According to your local law, please keep concentration and ensure safety if use the Bluetooth
headset when driving
2.Don’t let children to play the device.（Small parts may cause choking hazard）
3.Please note should power off electronic device or wireless device on some specified place
which include hospital, exploding range or somewhere has exploding potential risk.
4.Please turn off the Bluetooth headset before boarding plane, and don’t allow to use during
flight.
5.To avoid to hurt your hearing, suggest you don’t listen to it with loud volume for long time.
Ⅵ. Bl u etooth H ead set m a i nten a n ce
1.Please keep the headset dry and don’t place headset near rain, humidity and other liquid or
include mineral circumstance. These will corrode the headset. If the headset is wet, please use
it when it’s dried totally
2.don’t wash the headset with strong chemicals, cleaner and detergent etc.
3.please don’t use the headset in dusty and dirty place, it may damage the removable parts and
electronic components.
4.don’t place the earphone in high temp place, high temperature will shorten the device usage
life, damage battery or let some plastic distortion and melt.
5.don’t store the earphone in low temp place, when earphone temp arise to normal temp,
humidity will be existed into the inner of the headset, it will let the pcb board damage.
