KEYLESS ONE User manual

ONE

2 3
Handbook KBO - All right reserved 2013 - [email protected] Handbook KBO - All right reserved 2013 - [email protected]
Introduction and statement of conditions
Despite the attentive and careful realization, update and integration of the
contents and integrations in this handbook, these contents and information may
contain typing mistakes, inaccurancies or inconsistencies for whom Keyless®
does not provide any guarantee - neither explicit nor implicit - not even by way
of reliability or expectation. In particular, we do not guarantee completeness,
exhaustiveness and compliance with the current organization, company structure
or typology, characteristics, marketability and fitness for purpose of the products,
services and activities of Keyless®, who is available to provide any relevant
information. Keyless® reserves the right to make adjustments and changes to the
information contained in the handbook without prior notice, as well as to vary and
to change the products, the services and the activities described herein, without
it rising any kind of rights for a third-party. In order to reduce paper consumption,
we decided to minimise the description inherent to the use and installation in
this manual, whilst mantaining the greatest clarity. It is important to keep this
handbook to be able to consult it at any time. In case of sale, disposal or removal
of the product, make sure that the handbook is given to the new owner, to inform
him about the functioning and the related warnings. Read the instructions
carefully: they contain important information about installation, use and security.
In the interest of improving the internal design, the operational functionality and/
or the reliability, Keyless® reserves the right to make adjustments and changes
to the products described in this handbook without prior notice nor notification
in written or electronic form. Keyless® accepts no responsibility during the use or
the implementation of the products or the circuit diagram described herein.
Tech Handbook
All Keyless® products are certified and under warranty only if installed by
qualified personnel.
Before you begin the installation, make sure that the system is highly compatible
with your power circuit. Under no circumstance is Keyless® and its retailers
responsible for erroneous purchase, incompatibility of the products sold
and/or installed by unqualified personnel, loss of earnings or money due to
malfunctioning of Keyless systems.
THE INSTALLATION AND THE CONNECTION OF THE PRODUCTS MUST BE CARRIED
OUT WITHOUT A/C POWER.
Cut the power from the electrical panel or the counter; it is good to install a
thermal magnetic circuit breaker with 6A at least to maintain the system, it also
has to conform to the local standards in force.
EARTHING THE POWER SUPPLY IS REQUIRED BY LAW.
Keyless® accepts no responsibility for possible damages suffered by people,
things, pets or property, due to non-compliance with the rules described herein.
The system downstream of the power supply is low voltage (12V) and it does not
constitue a danger for people.
All Keyless® products have a 24 months warranty from the date of purchase over the
whole European territory.
The warranty is valid for products found to have structural manufacturing or functio-
nal defects. Under no circumstances should the warranty be understood as onsite, but
offsite. The detecting of defects, the dismantling, the shipment of the damaged pro-
duct to Keyless® headquarters, as well as the delivery charges regarding the interven-
tion, have to be carried out by the installer. Keyless® guarantees the product and its
functioning only if the product is correctly installed without adjustments for its only
purpose of use; using the product not as intended invalidates the warranty.
Keyless® is not responsible for damages caused to things or people, for the inappro-
priate use or installation of the product, nor for damages resulting from non-use due
to damages or defects, loss of earning, inactivity or non usability. It is up to the instal-
ler to communicate a possible defect as soon as possible via e-mail to the addresse
[e-mail].
After a brief evaluation following the handbooks recommended by Keyless®, the de-
fected or malfunctioning product can be returned to be repaired or replaced. The new
or repaired product will not have a new 24 months warranty, but it will be covered by
the official warranty given at the time of purchase.
All products damaged by power surges, thunderstorms and adverse weather condi-
tions, earthquakes, floodings or break-in attempts performed through mechanical
manipulation, erroneous connections or reversed polarity are not covered by warranty.
All legal disputes are reserved to the jurisdiction of the Foro of Treviso (Italy).
Rules and guarantees
Guidebook for the installation

4 5
Handbook KBO - All right reserved 2013 - [email protected] Handbook KBO - All right reserved 2013 - [email protected]
WARNING!
The Keyless units interact with the negative terminal.
Relay, door opener button, Day & Night, sensor, etc.
They are connected or bridged
EXCLUSIVELY to NEGATIVE (GND).
Incorrect connections (positive + 12V)
irreversibly damage the control unit.
It‘s Expressly Forbidden Power third-party equipment
(Remote controls, electric strikes, electric locks, door opening, relays, etc.)
with the power supply unit.
Failure to comply with such notice ago
decaying instantly warranty.
DON’T POWER THIRD PARTY DEVICES
 - INSTANTLY VOID THE WARRANTY -
- CREATE OPERATING FAULTS -

6 7
Handbook KBO - All right reserved 2013 - [email protected] Handbook KBO - All right reserved 2013 - [email protected]
Lead-acid batteries of the Keyless units
They must be changed periodically according to their usage status.
Generally a lead-acid battery has a maximum duration of 24 months.
The duration of time it‘s determined by the structure of the lead-acid batteries.
To ensure the continuity of exercise of the Keyless units in case of power failure,
 it‘s good practice to replace the lead acid battery every 12 months.
Violation of such notice
NOT guaranteed the continuity exercise
in case of power failure to the control units Keyless
WARNING!

8 9
Handbook KBO - All right reserved 2013 - [email protected] Handbook KBO - All right reserved 2013 - [email protected]
WARNING!
It remains to care for people installing the keyboard on (wall, wooden pillars, iron, cement, etc.)
ENSURE the impermeability!
We recommend using the following accessories:
Box container Polymers Keyboard vandal proof IP67.
It allows you to install the keyboard on any surface (rough wall plastered, facing bricks,
metal, marble, etc)
The container and ‘tin, and comes with its original seal.
The box comes with vandal-proof screws and its special insert
BOXKP15 Box IP67 Antivandal for Keypad
120x103x32mm
If Rear part(electronic),
placed in contact with umidity or water,
creates malfunction or damage the product and
it’s instantly void the warranty.
_
Keyless Keypad it’s IP67 protected
on the front part(keys)
ONLY

10 11
Handbook KBO - All right reserved 2013 - [email protected] Handbook KBO - All right reserved 2013 - [email protected]
Bell
Drilling diagonally, and ‘possible to channel the keyboard cable in corrugated bell.
This opportunity ‘makes much more’ easy passage of the cable through the wall to
reach the central unit comfortably.
Deep minimum
25mm
Screw with plug hole
60mm
Place and fix the keypad
Drill the exterior of the door with a 65mm hole saw to place and fix the anti-
vandal keypad. It is possible, however, to install the keypad in any desired place
(also outside the door (ex. On the wall); in this case, asses the track of the
cable.)

12 13
Handbook KBO - All right reserved 2013 - [email protected] Handbook KBO - All right reserved 2013 - [email protected]
LN
Red
Keypad
A1
Keyless LT 485 II
Blink = OK
IntelRelay
POWER YES
RELAY
NO POWER
Green
Coil
White
A2
Yellow
Relay 1
110/230 Vac
Battery
TE Connectivity 3A - 5V PCJ-105D3M
RESET
3 SECONDS
Central unit ONE
factory reset
(shortcut for 3 seconds)
restore factory settings
Switch POWER Relay
It allows you to directly power the
electric strike
(400mA max)
LED green
if blink = OK
off or blocked = problem
Linea electrical power line
100/240VAC
50/60Hz
Backup Battery
12V 7A (optional)
Galvanic Isolated power converter
Supply 15V 400 mA to Relay 1
(optional)
Product code KONEPLUS
Electric bolt
(not provided)
Keypad

14 15
Handbook KBO - All right reserved 2013 - [email protected] Handbook KBO - All right reserved 2013 - [email protected]
Cable and connection
21 3
5
46
87 9
0
*#
2 21 13 3
5 5
4 4
6 6
8 87 79 9
0 0
* *
# #
Intercom
Power supply
Brown Brown Brown
Additional push button
White White White Yellow Yellow Yellow Green Green Green
Electric bolt
Intercom
LN
Browne
Keypad
Green
White
Yellow
Relay 1
110/230 Vac
Battery
110/230VAC
50/60Hz
PLEASE NOTE!
Do not power locks / Electric
strikes with the power supply unit
of the ONE.
The power supply is designed to
power the ONLY Keyless unit.
Connect other equipment to the
same power can ‘irreversibly
damage the KIT Keyless, making
instantly void the warranty.
Only the Plus version can power
supply up to 15Vdc 400mA max
9type
55028 type new Masterpassword(es. 55028)
#to store
55028 type Masterpassword again
#to store
The ringtone (melody) confirms the operation
Programming the keypad menu is now possible ONLY WITH THE DOOR OPEN
the Masterpassword is to ACCESS THE MENU. IT DOES NOT OPEN the door
notice!
notice!
System settings and setup
Program the system by setting
666 = reset to Factory settings
9 = Masterpassword (see example below)
3 = Data and time (see example below)
3type
1503101832 type date and local time (ex. 10 March 2015 1832 hours)
In accordance with the format year/month/day/hour/minutes
The ringtone (melody) confirms the operation
set Masterpassword
Date and time setting

16 17
Handbook KBO - All right reserved 2013 - [email protected] Handbook KBO - All right reserved 2013 - [email protected]
1 type
23098 digit new user code(ex. 23098)
#to store
23098 type again new user code
#to store
Add new user code
2 type
23098 user code to delete(ex. 23098)
#To store
Wait musical tone(melody) for confirmation
Delete user code
666 type
Reset the entire system to factory setup
Wait musical tone(melody) for confirmation
System reset factory setup
699 type
Reset all users code(Masterpassword excluded)
Wait musical tone(melody) for confirmation
Reset all users code
Only some day and time
Every day and time
25 type(for limitated code(ex. Tuesday, Friday))
#To store
15321947 type(valid time slot(ez. from 1532 to 1947))
#To store
for add days and different time slot(do it again)
or store the days and time slot
#To store
Type of user(set the time slot rules)
0 type(for no limits code h24/265)
#to store
#To store the new user code
Wait musical tone(melody) for confirmation
full
semi

18 19
Handbook KBO - All right reserved 2013 - [email protected] Handbook KBO - All right reserved 2013 - [email protected]
1
Add user code
12345#
(example 12345)
12345#
Digit again
2
Delete user code
12345#
(example 12345)
3
Set date/time
1306201545
year/month/day/hour/minut
666
Factory reset
Masterpassword DON’T open door
To program the menu, digit Masterpassword with door open.
699
reset all users code
00000
musical volume
9
set Masterpassword
*
menu exit
54197#
(example 54197)
54197#
do it again
Choose day/time
0#
Valid every day/time
#
Store days/time slot
#
Store user code
Choose days
User code limited
Monday
1
Tuesday
2
Wednesday
3
Thursday
4
Friday
5
Saturday
6
Sunday
7
More days and time slot
24#
(ex. Tuesday and Friday
#
Store user code
User code no limit
Time slot
12351840#
(ex. from 1235 to 1840)
Special automatic settings always active and not disabled
Sliding code
To avoid the visual memory of those around you, you can enter up to 24 numbers
randomly before the opening code
How to slide the code
Example user code to open door 45023
Open with sliding code digitar randomly 3407436782045023
Keypad lock
The system automatically protects the opening of the door by the random pas-
sword attempts.
After 30 keystrokes with the wrong users code (of 6 users code), is blocked for 3
minutes.