keymaXX SP-1 User manual

SP-1
02/2023
KEY0005478-000
user manual

Congratulations on your new keymaXX SP-1Stagepiano!
Thank you for choosing a keymaXX product. Thanks to efficient development and
economical production, keymaXX makes high-quality products at a fantastic price possible.
Please read these operating instructions carefully to be informed about all functions of
this product and keep them for future reference
Have fun with your new product!
Your keymaXX Team
Guarantee:
The current general terms and conditions and guarantee conditions of Music Store
professional GmbH apply.
Can be viewed under: www.musicstore.de
If you have any questions or suggestions, please contact us:
Music Store professional GmbH Istanbulstr. 22-26
51103 Köln
Managing Director: Michael Sauer WEEE-Reg.-Nr. DE 41617453
Tel: [phone]
Fax: [phone]
[email protected]
Intended use:
The keymaXX SP-1 is a digital stage piano, designed to play sounds on the keyboard and
make them audible through built-in speakers or headphones. Improper use of the product is
considered improper and can lead to personal injury or property damage. No liability is
assumed for damage resulting from improper use.
It must be ensured that the device is operated exclusively by trained and competent users
who are in full possession of their mental, physical and sensory abilities. The use by other
persons is only permit-ted under the supervision or guidance of a person responsible for their
safety.

Important safety instructions! Please read before connection!
CAUTION! (Electro Magnetic Interference)
The normal function of the product may be disturbed by Strong Electro Magnetic
Interference. If so, simply reset the product to resume normal operation by following
the owner‘s manual. In case the function could not resume, please use the product
in other location.
DANGER! (For babies and children)
Dispose of or store any packaging material properly! Packaging material must be
kept out of the reach of babies and children due to the danger of suffocation .
Make sure that children never use the device unattended! In addition, make sure
that children do not remove (small) parts from the device, as they could suffocate by
swallowing parts!
DANGER! (Electric shock due to high voltages in the device)
The housing must not be removed! There are no parts to be maintained in the
device. Inside the unit there are components which are under high electrical
voltage.
Before each use, check the device for damage or the absence of components,
protective devices or housing parts. If this is the case, do not use the device! Leave
maintenance and repair work to a qualified service workshop or contact your
dealer.
DANGER! (Electric shock due to short circuit)
Modifications to the power cord or plug are prohibited. If the power cord is
damaged, it must be replaced immediately with an original spare part from the
manufacturer. Failure to do so may result in fire or death due to electric shock!
WARNING! (Damage to hearing)
The unit may generate volumes that may cause temporary or permanent hearing-
loss. Over time, even seemingly uncritical levels can cause hearing damage.
Reduce the volume immediately if ear noise or hearing loss occurs. If this is not
possible, keep a greater distance or use adequate hearing protection.
Hint! (Fire hazard due to overheating)
The maximum permissible ambient temperature of this device is 40°C.
Ensure that the unit is placed in a place with adequate ventilation, out of the reachof
direct heat sources, naked flames and combustible materials and liquids.
The ventilation slots of the device must not be taped or covered.

Hint! (Operating conditions)
Due to its structural characteristics, the device is designed for indoor operation
(IP20). Never expose the device to rain, moisture or liquids as this may cause
damage.
Vibrations, dust or solar radiation can also lead to damage, avoid them! Do not
apply excessive force to the switches or controls.
Do not let paper, metallic, or other objects into the instrument. If this happens,
remove the electric plug from the outlet. Then have the instrument inspected by
qualified service personnel.
Disconnect all cables before moving the instrument.
Hint! (Power supply)
It is essential that you check that the device voltage matches your local mains
voltage. It is highly recommended that you fuse your mains socket with a residual
current circuit breaker (FI).
Please connect the designated AC adaptor to an AC outlet.
If you do not use your device for a longer period of time, disconnect it from the
power supply in order to minimize danger. The same applies to storm conditions
such as thunderstorms, floods, etc.
Hint! (Commissioning)
All connections of the device should be made before switching on. Use only high-
quality cables for connections.
Hint! (Installation)
Be sure to inspect the device for damage before using. Optimum use of the
original packaging or suitable transport or storage packaging to protect the product
when not in use. Optimally against influences such as dust or moisture, etc.
Hint! (Possible damage due to magnetic fields)
Loudspeakers generate a static magnetic field. Please keep an appropriate
distance from other equipment that may be affected or damaged by an external
magnetic field.

Hint! (Interferences with other electrical devices)
Radios and televisions placed nearby may experience reception interference.
Operate this unit at a suitable distance from radios and televisions.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
 Reorient or relocate the receiving antenna
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
THE FCC REGULATION WARNING (for USA)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with theinstructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a
particular installation.
Symbols on device and packaging:
The lightning flash symbol warns the user about non-insulated current and the risk
of electrocution
The exclamation mark symbol warns the user about important maintenance and
operating instructions in the manual
Intended for indoor use
Read manual

Cleaning:
A regular cleaning of the device from impurities and dust increases the durability of the product.
Always disconnect the device from the power supply before cleaning it! Never clean the appliance
wet! Optical lenses should be cleaned with a dry microfiber cloth to optimize light output. Ventilation
grilles and openings should always be cleaned of dust and dirt. Suitable compressed air sprays
are recommended for this application.
Environmental Protection:
The company MUSIC STORE professional GmbH always strives to reduce the
burden of packaging to a minimum. The use of environmentally friendly and
recyclable materials is of fundamental importan ce to us. Please recycle the
packaging components after use.
Disposal of packaging:
Ensure that paper packaging, plastic material, etc. are recycled separately. Observe
the labels and the corresponding regulations.
Disposal of batteries:
Batteries do not belong in the garbage! Please dispose of batteries in accordance
with official regulations at collection points or disposal stations.
Disposal of your old device:
Do not dispose of the device with household waste! This device is subject to the
WEEE Directive (Waste Electrical and Electronic Equipment) in its currently valid
version.
The device is to be disposed of by an approved disposal company or your local
waste disposal service. The regulations applicable in your country must be
obser ved!
Manufacturer: MUSIC STORE professional GmbH,
Istanbulstr. 22-26, 51103 Cologne, Germany

CONNECTIONS
Power cable connection
Connect the power cord as shown, plug one end into the power port of the connection panel
and the other end into a 100-240V household power outlet (Figure A). When not using this
product for a long period of time, please unplug the power cordand keep it in a safe place.
Dual headphone jacks
Connecting headphones will automatically cut off the output of the keyboard's built-in
speakers, so that you can play without disturbing others. This product has two headphone
jacks, so you can plug in two sets of headphones at thesame time. (Figure B)
Output plug
Can be connected to stereos, speakers, amplifiers, etc.(Figure C)
Single-pedal connection
Plug the pedal wire end into the round socket at the back of the instrument to turn on the
sustain pedal sound effect function! (Figure D)
USB Interface
Use the USB transfer interface of this digital piano to connect to your computer. With the
music software pre-installed on the computer, study or Play keyboard for playing, composing,
storing and other functional operations. Edited music and music software built-in
accompaniment, can be connected through the software Connect to a digital piano for
playback, or play to accompanying music. (Figure E)
Three-pedal connection
Plug the pedal cable end into the round socket on the rear of the instrument to turn on the3
pedal sound effect functions! (Figure F)

CONNECTIONS
MIDI input and output jacks
Use the MIDI port of this digital piano to connect and interact with music devices with
MIDI. It can be connected to a computer. You can learn or play the keyboard to play,
compose, store and other functions by using the music software pre-installed on the
computer. The edited music and the built-in accompaniment of the music software
can be connected to the digital piano through the software for playback or playing
accordingto the accompaniment music. (Figure G)
Ability to play games, MP3 songs, etc. via Bluetooth MIDI connection to APP
(optional)
NOTE!
To prevent malfunction and damage to the device, always turn down the volume and turnoff
all devices before making any connections.

OPERATION GUIDE
POWER ON/OFF
Press the “POWER” switch to the open position , and you can enter the playing state
and play music on the keyboard.
Turn off the power supply when not in use for the time being.
Processor chips of this product are complex, similar to computer systems. Sometimes
they can not respond. Please turn off the power switch and then turn it on to work
properly.
VOLUME ADJUSTING
Use “VOLUME” to adjust the knob to increase or decrease the piano volume. Please adjust
the volume to a satisfactory position.
DEMONSTRATION MUSIC PLAYING
Hold down the “TONE/DEMO” button and press a corresponding black or white key
B2+#d1” in the demo area to play different demo repertoires.
Different “black or white keys” correspond to different songs. If you want to choose
other tracks, you can repeat the last step.
If you need to stop playing, hold down the “TONE/DEMO” button and press the “white
key A2” to stop playing the demo song.

OPERATION GUIDE
CHOOSE TONE
Hold down the "TONE/DEMO" button and press a
corresponding "white key c4-cs" in the timbre area to
play different instrument timbres.
 Whenever you turn on the power supply, the
default is "Grand piano"timbre.
SETTING DUAL TONE
 Hold down the "TONE/DEMO" button and press two arbitrary "white keys C4-C5"
in the timbre area to choose different timbre effects.
 Hold down the "TONE/DEMO" button and press the "white key C5" in the tone
area to turn off the dual tone function.
 In the dual tone mode, hold down the "TONE/DEMO" button and press the
"white key A3 or B3 " in the balance area to adjust the volume balance of the
two tones.
Note: Dual tone function can not be used under MIDI function!

OPERATION GUIDE
METRONOME
Press the "EFFECT" button, and press the "white key F1" to turn on/off the
metronome.
Hold down the "EFFECT" button and press a corresponding "white key G1-E" in
the metronomic selection area to select the metronomic type. There are six
types.
 Hold down the "EFFECT" button and press a corresponding "white key G-A" in
the speed regulation area to adjust the metronome speed.
TOUCH ADJUSTMENT
Hold down the "EFFECT" button and press a corresponding "white key C1-E1" in the
strengthselection area to adjust the keyboard response time.
 There are three levels of regulation, the strongest in C1 and the weakest in E1
CHORUS SOUND EFFECTS
 Hold down the "EFFECT" button and press a corresponding "white key E3-
B3 " in the chorus effect area to produce the chorus sound effect. There are five
kinds of effects to choose from.
 Hold down the "EFFECT" button and press the "white key C4" to turn off the
chorus sound effect.
REVERBERATION EFFECT
 Hold down the "EFFECT" button and press a corresponding "white key E4-A4" in
the reverberation effect area to produce reverberation effect. There are four
kinds of effects to choose from.
 Hold down the "EFFECT" button and press the "white key C5" to turn off the
reverberation effect.

OPERATION GUIDE
RECORD FUNCTION
The recording function can record and play the playing track, which has two tracks.
Track 1 Recording and Playing:
1. Press the "EFFECT" button and do not play. At the same time, press the "White Key
A2" in the area of track 1 to start recording of track 1.
2. When you play the keys or step on the pedals, you begin to record notes.
3. Hold down the "EFFECT" button again and press the "white key A2" in the area of
track 1 to stop track 1 recording.
4. Press the "EFFECT" button, and press the "white key B2" in the area of track 1 to start
playingthe notes recorded by track 1.
Track 2 Recording and Playing:
1. Press the "EFFECT" button and do not play. At the same time, press the "White Key Ci"
in thearea of track 2 to start recording of track 2.
2. When you play the keys or step on the pedals, you begin to record notes.
3. Hold down the "EFFECT" button again and press the "White Key C1" in the area of
track 2 to stop track 2 recording.
4. Press the "EFFECT" button, and press the "white key D1" in the area of track 2 to start
playing the notes recorded by track 2.
Track 1/2 joint broadcasting:
Press the "EFFECT" button, and press the "white key E1" to play the notes recorded by
track 1 and track 2 at the same time.
Storage capacity is about 5000 notes. Storage content includes pedal operation, tone
conversion and so on. For example, when the amount of pedal operation increases,
theamount of notes played by keyboard decreases relatively.
 Before recording with a metronome, operate the metronome and the metronome
will be recorded. The type of metronome can not be changed while recording and the
speed of metronome can not be changed when recording.

OPERATION GUIDE
TRANSPOSE
The tonal variation function can change the pitch of the keyboard without changing the
keyboard finger movement.
Hold down the “MIDI/MOFIFIED TONE” button and press the “white key F2
and F3” to select the tone-changing function.
MP3 PLAY
1. Insert the flash disk with MP3 format songs into “USB socket” and play MP3 songs
automatically in about 3 seconds.
2. By pressing the “PAUSE/PLAY” key, MP3 songs can be paused or replayed.
3. Press the control button of “MP3 SELECTIONS” in a short time to select the first/last
MP3 song.
4. Press the “MP3 VOLUME” control button for a long time to adjust the volume of the
song.
Maximum peak sound requires master volume fader control.
It needs MP3 format to play!
POWER SUPPLY
This product can be powered by standard indoor wall sockets. Please only use the power
cord specified in this product. When not in use, please turn off the power supply.When not
in use for a long time, pull out the power cord and keep it properly.