Keysheen Industry XPS001W User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
XPS001W
PARTS LIST
PART
NO.
1 1
1
1
1
1
2
3
4
5
MATERIAL CODE
18160401003
Music Speaker
Battery Device
Rubber Plug 1-small
Rubber Plug 2-medium
Rubber Plug 3-large
18160105002
18160607001
18160607002
18160607003
PART Q’TY
PAGE 1 OF 6

PAGE 2 OF 6
Step 1:
Open the plastic lock (A), pull out the battery device (#2) and then install 3 AAA batteries.
A2
FIGURE 2
FIGURE 1
Step 2:
Slide the music speaker (#1) onto the umbrella pole and then insert the battery device (#2).
Note:
Choose the appropriate sized rubber plug (#3), (#4) or (#5) from the back of music speaker (#1) to fix the music
speaker onto your umbrella pole.
1
2
3 4 5
4
4

PAGE 3 OF 6
FIGURE 3
Step 3:
Latch the plastic lock (A).
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKE SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU CAN NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSWHICH MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THESTORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNO. AND MATERIAL CODE FROM THE PARTS LIST.
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
Note:
Make sure the plastic lock (A) is always locked during the use of music speaker.

!
!
!
!
Do not discard of any of the packaging until you have checked that you have all of the
parts and fittings required.
Keep children away during assembly. This item contains small parts that can be
swallowed by children. Children should always be under direct adult supervision while
using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
COURTYARD CREATIONS INC.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
PAGE 4 OF 6
Cleaning and Maintenance
•To prolong the life and beauty of your music speaker, remove the batteries and store it
during long period of non-usage, or in any inclement weather.

PAGE 5 OF 6
ENJOY!
QUICK SET UP GUIDEUmbrella Bluetooth Speaker
with LED Lights
STEREO SOUND
1 Turn on unit by pushing the On / Off Button.
• 2 Speakers provide great
Works with ANY device with
Bluetooth connectivity
• 16 LED lights softly illuminates your table
• Connecting is as easy as 1-2-3
2 In the Bluetooth set up on your device,
search and link "Music Umbrella".
3 Listen for the music tone to let you know
that you are connected.
LED Button On / Off Button
3 x AAA*
RECHARGABLE BATTERIES WATER RESISTANT
NO TOOLS REQUIRED STEREO SOUND
*Batteries sold separately
Umbrella Bluetooth Speaker with LED Lights
12

PAGE 6 OF 6
Solutions to Common Speaker
Phenomenon
Problems Solutions
Several
unsuccessful
connection
attempts
Volume too
low or sound
distorted.
Discontinuous
sound for
music playing
Indicator will
not turn on
Ensure the speaker is in standby mode and turn
off the connection with other Bluetooth device.
Check the volume setting and adjust the
volume appropriately.
Move the speaker closer or remove obstacles
between speaker and your music playing device.
Check batteries.
Specification of Products
Speaker Size: Φ8*H 2 in.
Conform to Bluetooth V2.0 Specified Transmission Distance: ≤10m or 32ft
(the transmission distance varies due to different environment and
Bluetooth equipment of cell phones)
Power: 2.5W*2
Power Supply: dry battery AAA*3
Important Notes
• Read all of the instructions carefully.
• Comply with all of the instructions.
• Clean the product with a dry cloth.
• Do not place the product in a humid environment.
• Do not place the product in any liquid.
• Do not install the product near a heat source, such as radiator, heater,
furnace, or other heating equipment.
• Remove batteries when not in use for extended periods of time.
• Do not attempt to modify the product in any way.
FCC STATEMENT
1.This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1).This device may not cause harmful interference. (2).This device must accept any
interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
3.Radiation Exposure Statement:
This equipment complies with FCC radiation exposure requirement. The device can be
used in portable exposure condition without RF striction.
3
4