Keysight M9290A User manual

Keysight M9290A CXA-m PXIe Signal Analyzer
This manual provides documentation for Keysight M9290A
CXA-m PXIe Signal Analyzer running the Microsoft Windows 7
operating system.
Getting Started
and
Troubleshooting
Guide
Notice: This document contains references to Agilent.
Please note that Agilent’s Test and Measurement business
has become Keysight Technologies. For more information,
go to www.keysight.com.

Notices
© Keysight Technologies, Inc. 2014
No part of this manual may be
reproduced in any form or by any means
(including electronic storage and
retrieval or translation into a foreign
language) without prior agreement and
written consent from Keysight
Technologies, Inc. as governed by
United States and international
copyright laws.
Trademark Acknowledgements
Bluetooth® and the Bluetooth Logo®
are trademarks owned by Bluetooth
SIG, Inc., U.S.A. and licensed to
Keysight Technologies, Inc
Manual Part Number
M9290-90007
Print Date
October 2014
Printed in China
Keysight Technologies Inc.
No. 116 Tianfu 4th Street
Chengdu, China 610041
Warranty
THE MATERIAL CONTAINED IN THIS
DOCUMENT IS PROVIDED “AS IS,” AND
IS SUBJECT TO BEING CHANGED,
WITHOUT NOTICE, IN FUTURE
EDITIONS. FURTHER, TO THE
MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, KEYSIGHT
DISCLAIMS ALL WARRANTIES, EITHER
EXPRESS OR IMPLIED WITH REGARD
TO THIS MANUAL AND ANY
INFORMATION CONTAINED HEREIN,
INCLUDING BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE. KEYSIGHT
SHALL NOT BE LIABLE FOR ERRORS OR
FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES IN CONNECTION WITH THE
FURNISHING, USE, OR PERFORMANCE
OF THIS DOCUMENT OR ANY
INFORMATION CONTAINED HEREIN.
SHOULD KEYSIGHT AND THE USER
HAVE A SEPARATE WRITTEN
AGREEMENT WITH WARRANTY TERMS
COVERING THE MATERIAL IN THIS
DOCUMENT THAT CONFLICT WITH
THESE TERMS, THE WARRANTY TERMS
IN THE SEPARATE AGREEMENT WILL
CONTROL.
Technology Licenses
The hardware and/or software
described in this document are
furnished under a license and may be
used or copied only in accordance with
the terms of such license.
Restricted Rights Legend
If software is for use in the performance
of a U.S. Government prime contract or
subcontract, Software is delivered and
licensed as “Commercial computer
software” as defined in DFAR
252.227-7014 (June 1995), or as a
“commercial item” as defined in FAR
2.101(a) or as “Restricted computer
software” as defined in FAR 52.227-19
(June 1987) or any equivalent agency
regulation or contract clause. Use,
duplication or disclosure of Software is
subject to Keysight Technologies’
standard commercial license terms, and
non-DOD Departments and Agencies of
the U.S. Government will receive no
greater than Restricted Rights as
defined in FAR 52.227-19(c)(1-2) (June
1987). U.S. Government users will
receive no greater than Limited Rights
as defined in FAR 52.227-14 (June
1987) or DFAR 252.227-7015 (b)(2)
(November 1995), as applicable in any
technical data.
Safety Notices
CAUTION
A CAUTION notice denotes a hazard. It
calls attention to an operating
procedure, practice, or the like that, if
not correctly performed or adhered to,
could result in damage to the product
or loss of important data. Do not
proceed beyond a CAUTION notice until
the indicated conditions are fully
understood and met.
WARNING
A WARNING notice denotes a hazard. It
calls attention to an operating
procedure, practice, or the like that, if
not correctly performed or adhered to,
could result in personal injury or death.
Do not proceed beyond a WARNING
notice until the indicated conditions are
fully understood and met.

3
In This Guide…
The scope of this Getting Started Guide is to detail the processes of receiving and installing the
modules of the Keysight M9290A CXA-m PXIe Signal Analyzer.
Additionally, installing the required software is documented. If you have any questions after review-
ing this information, please contact your local Keysight Technologies Inc. representative or contact
us through our website at www.keysight.com/find/m9290a
1 Unpack and Verify the Shipment Contents
This chapter provides the process to unpack and verify the contents of the signal analyzer.
2 Install the Module
Refer to this chapter to install the CXA-m analyzer in a PXI Express chassis.
3 Installing the Software and Licensing
This chapter guides you to install the CXA-m software and redeem application license in Microsoft Windows 7.
4 Launching Modular SA Application
This chapter describes the process to launch a modular SA application in Microsoft Windows 7.
5 Running Modular SA Application
This chapter provides some guidelines for using a virtual front panel with the signal analyzer.
6 Troubleshooting
This chapter details some basic steps that may solve any problems you are experiencing with the signal analyzer.

4
Where to Find the Latest Information
Documentation is updated periodically. For the latest information about the product, including instrument software
upgrades, application information, and product information, browse to one of the following URLs:
http://www.keysight.com/find/cxa-m
The documentation associated with this product is available at the CXA-m product pages on keysight.com (go to
Document Library > Manuals).
To receive the latest updates by email, subscribe to Keysight Email Updates at the following URL:
http://www.keysight.com/find/emailupdates
Information on preventing analyzer damage can be found at:
http://www.keysight.com/find/PreventingInstrumentRepair
Is your product software up-to-date?
Periodically, Keysight releases software updates to fix known defects and incorporate product enhancements. To search
for software updates for your product, go to the Keysight Technical Support website at:
http://www.keysight.com/find/techsupport

Contents
5
1 Unpack and Verify the Shipment Contents
Initial Inspection 8
Inspect for Damage 8
Electrostatic Discharge Protection 8
If there is a Problem 10
Verify M9290A Shipment Contents 11
Instrument Information 12
Protecting Against Overpowering 12
Instrument Maintenance 12
2 Module Installation
Install the Module 14
Front-Panel Overview 16
Instrument Symbols 17
3 Software Installation and Licensing
Getting Started with CXA-m Software 20
Download the CXA-m software 20
Controller Requirement 20
Software Installation 21
Uninstalling the Software 26
Keysight CXA-m Signal Analyzer Licensing Options 27
How to Get a License 27
License Types 28
Licensing Measurement Application Software - After Initial Purchase 30
Install License by Using a USB Storage Device 30
Install License by Using License Manager 31
Transporting a License 33
4 Launching Modular SA Application
Configure Application Tool 36

6
Contents
Application Launcher 37
Start Launcher 37
Launcher Features 39
Hardware License Installation 43
Launching Modular SA Application with Launcher 44
Launch Modular SA Application Manually 44
Launch Modular SA Application Automatically 44
Launch Modular SA Application by Programming Codes 46
Launch Modular SA Application by Keysight Connection Expert 47
Launch Modular SA Application by IVI driver 48
5 Running Modular SA application
Display Annotations 50
Using Virtual Front Panel 52
Unhide/Hide Soft Keys 54
Open Virtual Front Panel from Right-Click Menu 54
Virtual Front Panel for Multiple Modules 55
Virtual Front Panel Keys Definition 56
Using Right-Click Menu 59
Using the Interactive Help System 61
Navigating the Signal Analyzer Application by keyboard 62
TCP/IP Address Configuration 65
Address Setting in Local Control 65
Address Setting in Remote Control 67
6 Troubleshooting
Check the Basics 70
Returning an Analyzer for Service 72
Calling Keysight Technologies 72
Locations for Keysight Technologies 72
Read the Warranty 73
Service Options 73

7
Keysight CXA-m Signal Analyzer
Getting Started Guide
1 Unpack and Verify the Shipment
Contents
This section explains how to verify the shipment contents when you receive the
shipment.
The following topics can be found in this section:
"Initial Inspection" on page 8
"Verify M9290A Shipment Contents" on page 11
"Instrument Information" on page 12

8
Unpack and Verify the Shipment Contents
Initial Inspection
Initial Inspection
Inspect the shipping container and the cushioning material for signs of stress. Retain
the shipping materials for future use, as you may wish to ship the analyzer to another
location or to Keysight Technologies for service.
Inspect for Damage
After unpacking a module, inspect it for any shipping damage. Report any damage to
the shipping agent immediately, as such damage is not covered by the warranty.
CAUTION To avoid damage when handling a module, do not touch exposed connector pins.
Electrostatic Discharge Protection
Electrostatic discharge (ESD) can damage or destroy electronic components (the
possibility of unseen damage caused by ESD is present whenever components are
transported, stored, or used).
CAUTION The modules are shipped in materials which prevent damage from static. The modules
should only be removed from the packaging in an anti-static area ensuring that correct
anti-static precautions are taken. Store all modules in anti-static envelopes when not in
use.
WARNING DO NOT use these techniques for a static-safe work station when working on circuitry with
a voltage potential greater than 500 volts.

9
Unpack and Verify the Shipment Contents
Initial Inspection
Test equipment and ESD
To help reduce ESD damage that can occur while using test equipment:
• Before connecting any coaxial cable to an analyzer connector for the first time
each day, momentarily short the center and outer conductors of the cable together.
• Personnel should be grounded with a 1 MΩresistor-isolated wrist-strap before
touching the center pin of any connector and before removing any assembly from
the analyzer.
• Be sure that all instruments are properly earth-grounded to prevent build-up of
static charge.
• Perform work on all components or assemblies at a static-safe workstation.
• Keep static-generating materials at least one meter away from all components.
• Store or transport components in static-shielding containers.
• Always handle printed circuit board assemblies by the edges. This reduces the
possibility of ESD damage to components and prevent contamination of exposed
plating.
Additional information about ESD
For more information about ESD and how to prevent ESD damage, contact the
Electrostatic Discharge Association (http://www.esda.org). The ESD standards
developed by this agency are sanctioned by the American National Standards
Institute (ANSI).

10
Unpack and Verify the Shipment Contents
Initial Inspection
If there is a Problem
If the shipping materials are damaged or the contents of the container are
incomplete:
• Contact the nearest Keysight Technologies office.
• Keep the shipping materials for the carrier’s inspection.
• If you must return an analyzer to Keysight Technologies, use the original (or
comparable) shipping materials.
CAUTION Analyzer damage can result from using packaging materials other than those specified.
Never use styrene pellets in any shape as packaging materials. They do not adequately
cushion the equipment or prevent it from shifting in the carton. They cause equipment
damage by generating static electricity and by lodging in the analyzer, blocking airflow.