KIAM KV30B User manual

Equipmart Ltd
Kiam House
Birchill Road
Knowsley Ind. Park North
Merseyside
L33 7TD
United Kingdom
T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk
Kiam
Power Products
Instructions Manual
Read instructions manual before use!
KV30B
WET & DRY VACUUM CLEANER
WITH BLOWER FUNCTION
6. Maintenance
1. Cleaning the Tank
After use or when the tank is full of dust (which is accompanied by a
noticeable loss of suction), the tank must be emptied.
a) Unfasten the locking latch and remove the vacuum head.
b) Remove the filter and clean out the dust from the tank.
c) Replace the filter and vacuum head, and fasten the locking latch.
2. Cleaning the Filter
a) Remove the filter.
b) Gently wash in clean warm water.
c) Allow to dry completely before refitting.
7. Technical
Model Power Voltage Frequency
KV30B 1400W 220v - 240v 50Hz / 60Hz
8. Help
Call Kiam Power Products on 0151 548 5500 for technical assistance
or visit our website www.kiamproducts.co.uk
T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk

T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk
1. Product Features
1) Vacuum cleaner for wet and dry applications.
2) Storage points on the base for easy access to accessories.
3) Hose outlet for blowing function.
2. Part Names
1) Insert the plug into the power supply socket (240 volt).
2) Press the switch to the on position to start the vacuum motor.
3) Adjust the airflow by pushing the sliding block foward / backword.
5. Protective Safety Functions
The KV30B is equipped with several protective safety functions.
1)
2)
3)
When the tank is full, the vacuum will lose suction and emit a noise
to indicate the motor is under strain. Turn off and unplug the
vacuum cleaner immediately, then empty the tank and reassemble
according to instructions.
Should the vacuum cleaner be turned on its side, immediately turn
the machine off. Right the vacuum cleaner, then turn it on again.
If the vacuum cleaner loses suction or emits sounds, turn it off and
empty the tank before continuing to use. Also check for any
blockages in the hose and tubes.
I = On
O = Off
T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk
Blower Outlet
Top Cover
Locking Latch
Steel Tank
Trolley Base
Castor Wheel
Air Inlet
Switch
Handle

T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk
4. How To Operate
Connection
To connect the vacuum hose into the machine,
insert the hose connector into the air inlet, make
sure it is securely fastened.
Use the correct accessories according to the job.
To remove the vacuum hose from the machine,
press the release button on the hose connector
and pull the connector out.
To use the blowing function, insert the hose
connector into the blower outlet, make sure it is
securely fastened.
Connect all accessories as pictured below.
Dust brush for bookshelves,
windows, tables, etc.
Wide floor brush for hard surface,
carpet, etc.
Crevice nozzle for crevices,
corners, etc.
Blower outlet for blowing dust
away.
Accessories
T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk
OPTIONAL ACCESSORIES
Vacuum hose
Tubes
Filter
Wide Floor
Brush
Crevice ToolDust Brush

T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk
3. For Safe Operation
Check before operation that the local power supply is the same as the
specification on the rating label (240v).
Do not use the machine in a
combustible and explosive area
in case the motor spark creates
ignition of fire and/or explosion.
Do not block the air inlet mouth
as this will cause the motor
temperatures to increase and
cause damage to the motor.
Do not pick up combustible
and/or explosive objects such
as cigarettes, petrol, etc.
Do not pick up any sharp
objects.
Do not pick up objects which easily attach on to the filter such as
calcareous powder, fine graphite powder, etc. that will block the
ventilation causing damage to the motor.
Do not overturn the machine in case water goes into and damages the
motor.
T: 0044 151 548 5500
F: 0044 151 548 5599
© Equipmart Ltd
www.kiamproducts.co.uk
Warning: If water is emitted from the blower outlet, do not overturn the
machine when repairing as water may get into and damage the motor.
Turn off the machine and remove the plug each time after using or
when carrying out maintenance.
Keep the machine away from strong sunlight and high temperature
areas in case of plastic distorting.
This machine is not to be used by children, persons with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge unless they are under supervision.
Children must be supervised and kept away from the machine to
ensure the do not play with it.
If the power cable is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to
avoid any potential hazards.
The power plug must be removed from the socket outlet before
cleaning or maintaing the machine.