Kicker Comp C15 User manual

lfKICKER®
COMPsuaWOOFER
... '-.-'$; ....
Owner'sManual
Models:
C15 I C12 I C10 I CB
Congratulations on your
KICKER purchase
Please record your purchase
information and keep your sales
receipt for validation of warranty.
Authorized Kicker Dealer:
Purchase Date:
Subwoofer Model Number:
Subwoofer Serial Number:
2
The Kicker Comp subwoofers were specially designed for "Livin' Loud" out in the harsh automotive
environment. Comp subwoofers
are extremely versatile, excel in asealed or vented box, and surpass
the competition on
an infinite baffle (free-air) installation. They are made of advanced materials and
construction techniques to maintain optimal performance for years to come.
Performance
Model:
C8
C10 C12 C15
Nominal Impedance [Zn], ohm 4 or 84or 8
4or8
4or 8
Resonance Frequency
[fs], Hz 40.2 29.4 26.5 21.7
Power Handling Watts, Peak
(RMS)
200 (100) 300 (150) 300 (150) 500 (250)
Sensitivity [SPLo],
dB @1 W, 1m 85.6 87.3
89.1 90.2
Effective Excursion
[EXmax™], in (mm) .34 (8.76) .38 (9.76) .38 (9.76) .45 (1153)
DC Resistance
[Re], ohm 3.98 3.70 3.69 3.32
Mechanical O-Factor [Oms] 10.00 9.65 9.61 11.20
Electrical O-Factor 10es] .544 .473 .447 .397
Total O-Factor
rOts]
.516 .451 .427 .383
Equivalent Volume
[Vas], ft3 (L) .69 (19.54) 2.27 (64.38) 4.5 (127.65)
9.61 (272.33)
Net Displacement,
in
3(cc)
38 (620) 60 (982) 105 (1719) 199 (3257)
Outer Frame Diameter,
in (em) 81/2 (21.6)
1011/16 (27.1) 12 1/2 (31.7) 153/8 (39)
Hole Cut-Out Diameter, in (em) 71/16 (18) 91/4 (23.5) 11 1/8 (28.3) 137/8 (35.2)
Mounting Depth,
in (em) 41/8 (10.4)
413/16 (12.3)
513/16 (14.8)
73/8 (18.8)
InfiniteBaffleMounting
The infinite baffle mounting method effectively utilizes the rear deck and trunk space of most sedan
type vehicles. The Comp subwoofer does not require asealed enclosure for thump'in performance.
Carefully install the subwoofer
in the baffle. Mark the rear deck or parcel shelf for the hole cut-out
diameter of the subwoofer and cut the hole. The rear deck may need to be reinforced to help hold the
weight of the subwoofer and to keep
it from flexing during playback. Mount 3/4" (1.9 em) thick MDF
(Medium Density Fiberboard) to the bottom
of the deck. Mark the MDF and cut the holes. If MDF is not
available
in your area, use high grade plywood. It is important to isolate the sound coming off the front
of the subwoofer from the sound radiating from the back of the subwoofer. This isolation
is usually
accomplished by using the driver
in afactory speaker location, or in alocation with asemi-isolated rear
chamber. See Figure
1.
Note: All specifications and performance figures are subject to change. Measurements based on 4ohm voice coil models.
Please visit the www.kicker.com for the most current information.
COMPSUBWOOFER

Sea/edEnclosureApplicafions
The Comp generates more sound pressure than competing subwoofers on the market and excels when
used
in the recommended sealed boxes. These sealed enclosure designs give the smoothest response
with increased energy at the lowest frequencies,
20 to 30Hz. These designs deliver massive amounts of
highly-accurate bass and can be driven with punishing levels of amplifier power.
The Comp high performance suspension system can operate
in alarger sealed enclosure. This
maximum enclosure volume application
is ideal for SO (ultra sound quality) installations. The SO
enclosure generates avery flat response curve and superbly extends the subbass response.
Comp woofers perform well
in any size sealed enclosure between the Compact and SO volume
recommendations. These systems will exhibit benefits
of both designs: Compact produces high-impact
bass. and SO generates low bass frequency protraction. Overall, the system will sound more like the
recommended enclosure design
it is closest to in enclosure volume. These enclosure recommendations
have been calculated with the airspace inside the enclosure and include the displacement
of the woofer.
All sealed-enclosure airspace should be filled to 50% loose poly-til (polyester fiberfill) stuffing.
Model: SealedCompact (MinimumEnclosureVolume) SealedSQ (MaximumEnclosureVolume)
C8
.5 ft3 (14.2L) Power Handling =
100W RMS
1.2 ft3 (34L) Power Handling =100W
RMS
Ci0
1.0 ft3 (28.3L) Power Handling =
150W RMS
2.4 ft3 (68L) Power Handling =
150W RMS
Ci2
1.25 ft3 (35.4L) Power Handling =
250W RMS
3.5 ft3 (99.1 L)
Power Handling =150W RMS
CiS
2.25 ft3 (63.7L) Power Handling =250W
RMS
5.0 ft3 (141 .6L) Power Handling =250W
RMS
Model:
C8
Ci0
Ci2
CiS
Panel Dimensions for CompaetSealedEnciosures using 3/4" (l.9cm) thick MDF:
Volume, ft3 (L) Panel A, in (em) Panel S, in (em) Panel C, in (em)
.5 (14.2) 11x11 (27.9x27.9) 11x9.5 (27.9x24.1) 9.5x9.5 (24.1 x24.1)
1.0 (28.3) 13.5x13.5 (34.3x34.3) 13.5x12 (34.3x30.5) 12x12 (30.5x30.5)
1.25 (35.4) 14.5x14.5 (36.8x36.8) 14.5x13 (36.8x33) 13x13 (33x33)
2.25 (63.7) 17.25x17.25 (43.8x43.8) 17.25x15.75 (43.8x40) 15.75x15.75 (40x40)
Figure 1
Carefully mount loudspeakers in the trunk space or in other compartments
of the vehicle.
Pay attention to cable lines, trunk springs, hinges and seat
mechanisms that could cause problems with the operation of the vehicle
or stereo system. Carefully
lay the stereo system cables; pay attention to
seat fasteners and other items that could harm the cables.
Comp Subwoofer -Covered by one or more of the following patents;
U.S. Pat #'s 6,611,604,6,731,7730473,216, 0456,386, 0449,293, A
0355,193,
Taiwan Pat. #162,154; Other U.S. and foreign patents pending.
B
c
Please allow two weeks of break-in time for the subwoofer to reach optimum performance. To get the best performance
from your new Kicker subwoofers, we recommend using genuine Kicker Accessories and Wiring. 3

VentedEnclo5ureApplications
Ported Comps? Absolutely...and with avengeance! These enclosures incorporate massive slot-loaded
(rectangular) ports with ultra low air velocity for ground pounding street bass that will make your "skin
bounce on your bones!"
These boxes are the enclosure
of choice for outrageous street bass and high performance SPL
contests. If space
is not aproblem and you want to get the most from your Comp, try one of these
ported designs.
You will not be disappointed.
1.75 ft3 (49.6l) +port displacement
1.2 ft3 (34l) + port displacement
1.5 x 8" (3.8x20.3cm) port, 12.25" (31.1 cm) long
Power Handling = 55W RMS
VentedSPLlDeepBass (MaximumEnclosureVolume)
1.25 ft3 (35.4l) + port displacement
.66ft
3(18.7l) +
port displacement
1.5 x 8" (3.8x20.3cm) port, 18" (45.7cm) long
Power Handling = 55W RMS
VentedCompact (MinimumEnclosureVolume)
CB
C10
Model:
The ported Compact design increases bass efficiency and fits in many space-limited applications.
Although it is the smallest recommended ported enclosure, the output from
30 to 80 Hz will be
considerably higher than that of any sealed box. The SPL 1Deep Bass ported design has even more
output
in this crucial frequency band.
•The SPL1Deep Bass
is the largest and most efficient enclosure design. The SPL 1Deep Bass delivers
the sonic output needed
to win SPL contests and it produces bass notes "all the way down to the
cella". This design turns heads and
jump starts your heart.
1.5 x 10.5" (3.8x26.7cm) port, 14.5" (36.8cm) long 1.5 x 10.5" (3.8x26.7cm) port, 13.25" (33.7cm) long
Power Handling = 150W RMS Power Handling = 150W RMS
C12 1.75 ft3 (49.6l) + port displacement
2 x 12.5" (5.1 x31.8cm) port, 16" (40.6cm) long
Power Handling = 150W RMS
2.25 ft3 (63.7l) +port displacement
2 x 12.5" (5.1 x31.8cm) port, 16.375" (41.6cm) long
Power Handling = 150W RMS
C15
3.0 ft3 (85.0l) +port displacement
2.75 x 15.5" (7x39.4cm) port, 17" (43.2cm) long
Power Handling = 250W RMS
4.0 ft3 (113.3l) + port displacement
3 x 15.5" (7.6x39.4cm) port, 16.5" (41.9cm) long
Power Handling = 250W RMS
BoxBuildingNotes
Use 3/4" (1.9cm) or thicker MDF (medium density fiberboard) and seal the joints with silicone. Use the
"template" inside your
Comp's shipping carton to mark the mounting hole, then cut directly on the line.
These designs need internal bracing.
Add triangular bracing between each of the larger unsupported
panels. See Figure 3.
All the cubic feet (L) measurements in this manual include the displacement of the woofer. For the
vented enclosures the displacement
of the port must be calculated and added to the internal volume of
the final design. Use the outer dimensions of the port and multiply "X x Y x Z", convert to cubic feet, for
example the C12 vented
compact design's external port dimensions are, using 3/4" (1.9cm) MDF:
[12.5" x(2" +1.5" total MDF thickness) x16"] x
(1 ft3 /1728 in
3)=.405
ft3, and add this number to
the internal volume of the enclosure, C12's 1.75 ft3 +.405 ft3 = 2.16 ft3. See Figure 4. Due to the
necessary length
of these ports, you may want to fold the port along the bottom and back walls. It will
be impractical to use round ports for these designs.
Do not install aport opening against asolid surface, such as an internal brace, back-panel
or trunk wall,
seat
or interior panel of your vehicle. The port opening must remain unobstructed. Use the smallest
dimension
of the rectangular port as the minimum amount of space between the port opening and any
solid surface
to insure unrestricted airflow.
4COMPSUBWOOFER

If you prefer an ultra-smooth bass response, you should loosely fill your Comp enclosure with
poly-fil stuffing. Ported designs will require covering the end
of the port (located inside the box) with grill
cloth, chicken wire, or expanded metal to prevent the poly-fil from exiting the port. The use
of poly-fil
will slightly decrease efficiency, but will deepen and extend the low frequency output.
For more advice on box building, refer to your Authorized Kicker
Dealer, or click on the Support tab on
the Kicker homepage, www.kicker.com. Choose the Technical Manuals link and then download or view
the corresponding information. Please E-mail [email protected] or call Technical Services
[phone] for specific or unanswered questions.
o
o
o=3x3 for C15, C12
o=2 x 2 for C1 0, C8
Pro Tip: You are one ZX
Mono-Amplifier and afew
cables away from aslamm'in
system!
The Kicker ZX line of
mono-amplifiers make it easy
to upgrade to rock-solid bass
with your existing
or stock
source unit. Please ask your
dealer about the Kicker
ZX
Amplifier upgrades.
o
1------------- -
~----------------
~-----------------x----------------~I~/ .' Figure 4
ANote on PowerHandlingCapacity
Comp subwoofers will handle massive amounts of power in any of the recommended enclosures,
minimum or maximum. The smaller enclosures are best for use
in limited-space applications.
The larger recommended enclosures will yield slightly more bass at the lowest frequencies.
The infinite baffle (free-air) mounting method will handle moderate amounts
of power
and take up less trunk or passenger space.
Note: The use of asubsonic filter will significantly increase the power handling,
The power handling specifications
in these charts are calculated using a25Hz, 24dB per octave subsonic filter, 5

6
AcousticsLimitedWarranty
Kicker warrants this product to be free from defects in material and workmanship under normal use for aperiod of
THREE
(3) MONTHS from date of original purchase with receipt. When purchased from an Authorized KICKER Dealer
it
is warranted for ONE (1) YEAR from date of original purchase with receipt. In all cases you must have the original
receipt. Should service be necessary under this warranty for any reason due
to manufacturing defect or malfunction
during the warranty period, Kicker will repair or replace
(at its discretion) the defective merchandise with equivalent
merchandise at no charge. Warranty replacements may
have cosmetic scratches and blemishes. Discontinued
products may be replaced with more current equivalent products.
This warranty is valid only for the original purchaser and is not extended to owners of the product subsequent to the
original purchaser. Any applicable implied warranties are limited
in duration to aperiod of the express warranty as
provided herein beginning with the date
of the original purchase at retail, and no warranties, whether express or
implied, shall apply to this product thereafter. Some states
do not allow limitations on implied warranties; therefore
these exclusions may not apply
to you. This warranty gives you specific legal rights; however you may have other
rights that vary from state to state.
WHAT TO DO IF YOU NEED WARRANTY OR SERVICE
Defective merchandise should be returned
to your local Authorized Stillwater Designs (Kicker) Dealer for warranty
service. Assistance
in locating an Authorized Dealer can be found at www.kicker.com or by contacting Stillwater
Designs directly.
You can confirm that adealer is authorized by asking to see acurrent authorized dealer window
decal.
If it becomes necessary for you to return defective merchandise directly to Stillwater Designs (Kicker), call the Kicker
Customer Service Department at [phone] for aReturn Merchandise Authorization
(RMA) number. Package all
defective items in the original container or in apackage that will prevent shipping damage, and return to:
Stillwater Designs, 5021 North Perkins Road, Stillwater, OK 74075
The RMA number must be clearly marked on the outside of the package. Please return only defective components.
The return of functioning items increases your return freight charges. Non-defective items will be returned freight-
collect to you.
Include acopy of the original receipt with the purchase date clearly visible, and a"proof-of-purchase" statement listing
the Customer's name, Dealer's name and invoice number, and product purchased. Warranty expiration on items
without proof-of-purchase will be determined from the type of sale and manufacturing date code. Freight must be
prepaid; items sent freight-collect, or COD, will be refused.
WHAT IS
NOT COVERED?
This warranty
is valid only if the product is used for the purpose for which it was designed.
It does not cover:
oDamage due to improper installation
oSubsequent damage
to other components
oDamage caused by exposure to moisture, excessive heat, chemical cleaners, and/or UV radiation
oDamage through negligence, misuse, accident or abuse. Repeated returns for the same damage may be
considered abuse
oAny cost or expense related
to the removal or reinstallation of product
oSpeakers damaged due
to amplifier clipping or distortion
oItems previously repaired or modified by any unauthorized repair facility
oReturn shipping on non-defective items
oProducts with tampered or missing barcode labels
oProducts returned without aReturn Merchandise Authorization
(RMA) number
oFreight Damage
oThe cost
of shipping product to Kicker
oService performed by anyone other than Kicker
HOW LONG WILL IT TAKE?
Kicker strives to maintain agoal of 24-hour service for all acoustics (subwoofers, midrange and coaxial drivers,
tweeters, crossovers, etc) returns. Delays may be incurred if lack of replacement inventory or parts is encountered.
Failure to follow these steps may void your warranty. Any questions can be directed to the Kicker Customer Service
Department at [phone].
COMPSUBWOOFER

InternationalWarranty
Contact your International Kicker dealer or distributor concerning specific procedures for your country's warranty
policies.
WARNING: KICKER products are capable
of producing sound levels that can permanently damage your hearing!
Turning
up asystem to alevel that has audible distortion is more damaging to your ears than listening to an
undistorted system at the same volume
level. The threshold of pain is always an indicator that the sound level is too
loud and may permanently damage your hearing. Please use
common sense when controlling volume.
GARANTiA INTERNACIONAL Versi6nEspaiioi
Comuniquese con su concesionario 0distribuidor Kicker internacional para obtener infor aci6n sobre procedimientos
especfficos relacionados
con las normas de garantia de su pais.
ADVERTENCIA: Los excitadores Kicker son capaces de producir niveles de sonido que pueden danar
permanentemente
el oido. Subir el volumen del sistema hasta un nivel que produzca distorsi6n es mas danino para el
oido que escuchar un sistema sin distorsi6n al mismo volumen. EI dolor es siempre una indicaci6n de que el sonido es
muy fuerte yque puede danar permanentemente
el oido. Sea precavido cuando controle el volumen.
La frase "combustible para vivir la vida Livin'
Loud™ a todo volumen" se refiere al entusiasmo por la vida que la marca
Kicker de estereos de autom6vil representa y a
la recomendaci6n anuestros clientes de que vivan 10 mejor posible ("a
todo volumen")
en todo sentido. La linea de altavoces yamplificadores Kicker es la mejor del mercado de audio de
autom6viles ypor
10 tanto representa el "combustible" para vivir a todo volumen en el area de "estereos de autom6vil"
de
la vida de nuestros clientes. Recomendamos atodos nuestros clientes que obedezcan todas las reglas y
reglament03 locales sobre ruido en cuanto alos niveles legales yapropiados
de audici6n fuera del vehiculo.
INTERNATIONALE GARANTIE OeutscheVersion
Nehmen Sie mit Ihren internationalen Kicker-Fachhandler oder Vertrieb Kontakt auf, um Details Ober die
Garantieleistungen
in Ihrem Land zu erfahren.
WARNUNG: KICKER-Treiber kbnnen einen Schallpegel erzeugen, der zu permanenten Gehbrschaden
fOhren kann!
Wenn Sie ein System auf einen Pegel stellen, der hbrbare Verzerrungen erzeugt, schadet das Ihren Ohren mehr, als ein
nicht verzerrtes System auf dem gleichen Lautstarkepegel.
Die Schmerzschwelle ist immer eine Anzeige dafOr, dass
der Schallpegel zu laut ist und zu permanenten Gehbrschaden
fOhren kann. Seien Sie bei der Lautstarkeeinstellung
bitte vernOnftig!
Der Slogan "Treibstoff
fOr Livin' Loud" bezieht sich auf die mit den Kicker-Autostereosystemen assoziierte
Lebensfreude und die Tatsache, dass wir unsere Kunden ermutigen,
in allen Aspekten ihres Lebens nach dem Besten
("Livin' Loud") zu streben. Die Lautsprecher und Verstarker von Kicker sind auf
dem Markt fOr Auto-Soundsysteme
fuhrend und stellen somit den "Treibstoff"
fOr das Autostereoerlebnis unserer Kunden dar. Wir empfehlen allen unseren
Kunden, sich bezOglich
der zugelassenen und passenden Lautstarkepegel auBerhalb des Autos an die brtlichen
Larmvorschriften zu halten.
GARANTIE INTERNATIONALE VersionFram;aise
Pour connaitre les procedures propres a la politique de garantie de votre pays, contactez votre revendeur ou
distributeur International Kicker.
AVERTISSEMENT: Les haut-parleurs Kicker ont
la capacite de produire des niveaux sonores pouvant endommager
I'ou'ie de fa90n irreversible! L'augmentation du volume
d'un systeme jusqu'a un niveau presentant une distorsion
audible endommage davantage I'ou'ie que I'ecoute
d'un systeme sans distorsion au meme volume. Le seuil de la
douleur est toujours Ie signe que Ie niveau sonore est trop eleve et risque d'endommager I'ou'ie de fa90n irreversible.
Reglez
Ie volume en faisant prevue de bon sens !
L'expression "carburant pour
vivre plein pot" fait reference au dynamisme de la marque Kicker d'equipements audio
pour vehicules et apour but d'encourager nos clients afaire
Ie maximum (" vivre plein pot ") dans tous les aspects de
leur
vie. Les haut-parleurs et amplificateurs Kicker sont les meilleurs dans Ie domaine des equipements audio et
representent
donc pour nos client Ie "carburant pour vivre plein pot" dans I'aspect "installation audio de vehicule "
de leur vie. Nous encourageons tous nos clients arespecter toutes les lois et reglementations locales relatives aux
niveaux sonores acceptables aI'exterieur des vehicules.
«(
PO. Box 459 •Stillwater, Oklahoma 74076. U.S.A. [phone] 09202006+07Comp 7