Kiddy Rides Cutey Hat User manual

Homing Amusement And Game MachineCo.,Ltdhttp://www.hominggame.com
-- 1
User Manual
of
KIDDY RIDES
Cutey Hat
Please read this <UserManual> carefully before operating machines!

Homing Amusement And Game MachineCo.,Ltdhttp://www.hominggame.com
-- 2
User Manual ofKiddy Rides
1. Technical Parameters:
Item Value Remark
WorkingVoltage AC220V(or on your request)
MachineWorking Current 2.4A
Motor Power 180W
RockingFrequency 0.58-0.75S
Carrying Capacity 40KGS
2. Applicability:
Placeindoor, andapply to 3~7 years oldchildren under 40Kgs.
3. Configuration and Operation:
1.Connectthe machine toelectrical outlet withplug.
2.Openthepanel of control box with key,andturn onthe electric switch on the
control box. Pleasemakesure the indicial LED light insidethe switch is shining.
3.Configure coin acceptor according to following instructions and picture –
1) Open the panel of coin acceptor with key,and take out the coinacceptor.
2) Put the modeswitch on N.O. (NormalOpen).
3) Put the speed switch on MEDIUM(45ms medium pulse signal).
4) Mount a coin tobe used into the coinholder accordingto the below picture.
5) Adjust the sensitivity knob (it’sasmallknob marked as “VR”on the coin acceptor),until
the coinacceptorcan accept the rightcoins correctly,and rejectother coins or tokens.
THISSTEPIS VERY IMPORTANT.
6) Close and lock up the panel.

Homing Amusement And Game MachineCo.,Ltdhttp://www.hominggame.com
-- 3
4.Configurethe control box according to following instructionsand picture-
1) Open the panel of control box with key.
2) Turn on the electric switch on the control box,and make sure the LED light is shining.
3) Set the price from 1~3 coins by the COUNT”knob.
4) Set the time from 1~3 minutes by the TIMER”knob.
5) Adjust the volume bythe VOLUME”knob.
6) Switch offthe machine for10 seconds, and then restart themachine. THISSTEPIS
VERYIMPORTANT; OTHERWISE YOURCONFIGURATION WILLNOT TAKE EFFECT.
7) Close and lock up the panel of controlbox.
5.Afterinsertingcoin(coins),themachinewill giveout alarm sound,andthenrock with
music accordingtothetimesetpreviously,andwill give out alarm soundagain3
secondsbefore gameover.
6.When suspendtheoperation of machine,please switch offthemachine.
4. Attentions:
1.Please make sure thegroundlineis connectedwell, when the machine is in use.

Homing Amusement And Game MachineCo.,Ltdhttp://www.hominggame.com
-- 4
2.When machines cannotworkorstopautomatically,pleaseswitchoffthemachine
immediately andexamine& repair themachine.
5. Maintenance:
1.When machineis dirty, youcan leanit withcottonfabric.
2.In order to protectthemachines,pleaselubricate themainmovingpartsof the
machinetermly.You’dbetter lubricatethe rocking shaftsand bearingsevery 2
month, and lubricateother parts in every 6 months.
3.After aperiod of use,the straps or chains insidemachines would getloose,and the
strapswould possibly skid. Atthis time, pleaserepositionthestrapsor chains inside
themachines.
6. Examine and Repair:
1.LED light is not shining, when turn on the electric switch on control box.
TheLED lightisnotshining,meansthePCBisNOTpower-on.Please makesure
following things -
1) The electric switch is connected well and notbroken.
2) The “MotorFuse”and “Line Fuse”on the control box are not blown.
3) All plugs and wire lines related withPCBare good,and connected firmlyand not
loose.
2.Motor cannot start-up, and machine cannot work.
1) Please check if the indicial LED light inside electric switch is shining or not.
2) Please check if “Motor Fuse”and “Line Fuse”on the control box are blown.
3) Ifthe above is ok. Please take offthe PCB fromthe machine and test on another
machine, to see if the PCB is good or broken.
i. Ifthe PCBdoes not work on another machine, please change the CPUon the
PCB and tryagain.If still notworks, we should change the whole PCB.
ii. Ifthe PCBworks on another machine,please go to the nextstep.
4) Ifallabove no problem, butmotors can not work, please examine the motor by this
way: pull outthe plug of the motor,and connect the motor to AC220V power supply by
wire directly, tosee if the motor works.
i. Ifthe motorworks correctly,please check all plugs and wire lines related with
motor,and make sure they are all good, and connected firmly and not loose.
ii. Ifthe motor cannotwork, itmeans the motoris broken. Please change anew
motor.

Homing Amusement And Game MachineCo.,Ltdhttp://www.hominggame.com
-- 5
3.No any sound from sound speaker.
1) Check if the VOLUME”knob is on rightposition, and adjust ittosee what happens.
2) Check if the sound speaker is damaged or broken.
3) Make sure all plugs and wire lines related with soundspeaker is good and
connected firmly and notloose.
4) Please check if the PCBis ok,according to the way stated in 6-2-3.
4.Machine continually works by itself without coins.
1) Continually works by itself but without music.
a) Please change or just take offthe capacitor (yellow color) fromthe PCB, and then
restart the machine.
b) If still problem, it means the relay (blue color)on the PCB is broken, and please
changes a newreply to test. Attached is a pictureto show the capacitor and
relay.
2) Continually works by itself and with music. Please check ifcoin acceptor was jammed
by something or it's broken. Please change a new coin acceptor to try onthe machine.

Homing Amusement And Game MachineCo.,Ltdhttp://www.hominggame.com
-- 6
5.Straps skid.
After alongperioduse,the trapsinside the machinewill get loose or become slack.
Please change theinvalid strapson time.
DIPSwitch
4 3 2 1 Function
ON ON 4 coins per game
ON OFF 3 coins per game
OFF ON 2 coins per game
OFF OFF 1 coin per game
ON ON 240 s/game(6 circles/game)
ON OFF 180 s/game(5 circles/game)
OFF ON 120 s/game (4 circles /game)
SW1
/JP2
OFF OFF 60 s/game(2 circles /game)
NO.4 feet andNO.5 feet close(P1.7) Calculate for circle per game
JP1 NO.4 feet andNO.5 feet open Calculate for time per game
Main board Pins and Their Functions

Homing Amusement And Game MachineCo.,Ltdhttp://www.hominggame.com
-- 7
Pin No. code Resource Function Remark
1 P1.4
2 P1.5
3 P1.6
4 P1.7 No button function when calculating circle
JP1
5 GND
Buttonfor
outside
1 P1.0
2 P1.1
3 P1.2
4 P1.3
JP2
5 GND
Port of
parameter
setting
1 +12V
2 P3.7 Control forinput of audion OC
3 P3.6 Control forinput of audion OC
4 P3.5 Control forinput of audion OC
JP3
5 P3.4 Control forinput of audion OC
Lamp control
1 P3.0 Switch For circle use
only
2 GND
3 P3.1 Stop switch stop
4 GND
5 P3.2 Coin insert
JP4
6 GND
1 SND_LV Input port for adjustable resistance
2 SND_L Output port for adjustable resistance
JP5 3 GND GND Volume
adjustment
1 Port 1 Relay open
2 Blank
JP6 3 Port 2 Relay open Control outside
motor
1 SPEAK+ Positive port of loudspeakerJP7 2 GND Negative port of loudspeaker loudspeaker
output
1 +12V Input/output +12V <2ADC
2 AC10V AC 9-10V input port 1
3 AC10V AC 9-10V input port 2 Low AC input
JP8
4 GND
J2 1-34 ADD DATAand Control of music storage
1 VCC Power supply for music storageJ1 2 GND Power supply
for music
storage